Hydraulic Application Caps & Plugs

We found 41 product types for Hydraulic Application Caps & Plugs

Need a Quote?

For large volumes and customised products, add to your cart and click request a quote, or email sales@essentracomponents.se and we will respond within 2 working days

Filter Products

  • of 2
List Grid

Push-In Plugs

In stock In production

Push-in Plugs are easy solution offering a quick fitting and are suitable for most applications. Provides all the advantages of a threaded plug with the ease of a push-in style.

{0} variants (Filters applied) {0} variants (No filters applied)

Threaded O-ring Plugs - Metric Threads

In stock In production

Threaded O-ring Plugs - Metric Threads can be applied or removed by hand, hex wrench or screwdriver. The O-ring provides a water tight seal for superior leakage protection.

{0} variants (Filters applied) {0} variants (No filters applied)

Threaded Protection Plugs - UNF Threads

In stock In production

Threaded Protection Plugs - UNF Threads are widely used in hydraulic, pneumatic and general engineering industries. They come with a knurled head to easily grip the head and they offer an excellent protection from dirt, moisture and corrosion. They are suitable for UNF threads.

{0} variants (Filters applied) {0} variants (No filters applied)

Threaded Protection Plugs - Wide Flange

In stock In production

Wide Flange Threaded Protection Plugs are made of nylon to absorb paint and keep flaking at a minimum avoiding contamination upon removal. The nitrile gasket seals the plug to the mating surface for a watertight seal.

{0} variants (Filters applied) {0} variants (No filters applied)

Threaded Sealing Caps - BSP/Gas Threads

In stock In production

HDPE Threaded Sealing Caps are used throughout the automotive, fluid power and engineering industries. They are recommended to be tightened by hand although the hexagonal head enables the cap to be applied or removed by spanner or socket at a low torque. The cap is fitted with an internal neoprene rubber sealing disk to limit fluid leakage. Suitable for BSP/Gas threads. Our range is supplied in Yellow, with lots of size options available.

{0} variants (Filters applied) {0} variants (No filters applied)

Quick Release Plugs

In stock In production

Hydraulic Quick Release Dust Plugs are male fitting suitable to plug ISO A and ISO B series. They are designed to remain attached to the hose and they offer excellent protection from dirt, moisture and corrosion.

{0} variants (Filters applied) {0} variants (No filters applied)

Slottex Plugs

In stock In production

Slottex Plugs are screw on protection plugs that can be applied or removed with screwdriver, spanner or socket. They can be tightened manually or with power tool. The range cover a large offering of dimensions suitable for Metric threads, BSP threads and UNF threads.

{0} variants (Filters applied) {0} variants (No filters applied)

Threaded O-ring Plugs - BSP/Gas Threads

In stock In production

Threaded O-ring Plugs - BSP/Gas Threads can be applied or removed by hand, hex wrench or screwdriver. The O-ring provides a water tight seal for superior leakage protection.

{0} variants (Filters applied) {0} variants (No filters applied)

Threaded Protection Plugs - BSP/Gas Threads

In stock In production

Threaded Protection Plugs - BSP/Gas Threads are widely used in hydraulic, pneumatic and general engineering industries. They come with a knurled head to easily grip the head and they offer an excellent protection from dirt, moisture and corrosion. They are suitable for BSP/Gas threads.

{0} variants (Filters applied) {0} variants (No filters applied)

Side Release Plugs

In stock In production

Our Side Release Plugs feature a continuous sealing lip and a strong flexible side-tab. These ergonomic plugs are made of natural LDPE. Plug designed with rounded body ensures a low-abrasion fit.

{0} variants (Filters applied) {0} variants (No filters applied)

Threaded Protection Plugs - Metric Threads

In stock In production

Threaded Protection Plugs - Metric Threads are widely used in hydraulic, pneumatic and general engineering industries. They come with a knurled head to easily grip the head and they offer an excellent protection from dirt, moisture and corrosion. They are suitable for Metric threads.

{0} variants (Filters applied) {0} variants (No filters applied)

Flanged Caps

In stock In production

Flanged Caps are designed to protect the thread of studs. They are used throughout the automotive and engineering industries for general protection uses. The flanges on the profiles have different sizes allowing a socket wrench to function without removing the protection. We offer a selection of materials, including; LDPE, TPR, PVC and Silicone. Our range also includes colour options; Natural, Red and Black and wide choice of sizes to suit your application needs.

{0} variants (Filters applied) {0} variants (No filters applied)

Threaded Protection Caps - BSP/Gas Threads

In stock In production

These Polyethylene Threaded Protection Caps are used throughout the automotive, fluid power and engineering industries. They protect threaded components from dust, moisture and damage. They are suitable for BSP/Gas threads. Our range is available in Yellow or Red and a wide choice of sizes, to suit your application needs.

{0} variants (Filters applied) {0} variants (No filters applied)

Threaded O-ring Plugs - UNF Threads

In stock In production

Threaded O-Ring Plugs are equipped with a compressing flange lip and O-ring for a watertight seal and superior leakage protection for hydraulic UNF threads. Can be applied and removed by hand, wrench, socket, or screwdriver.

{0} variants (Filters applied) {0} variants (No filters applied)

Threaded Protection Plugs - NPT Threads

In stock In production

Threaded Protection Plugs are made of nylon or HDPE to guard NPT Threads from contaminants and moisture during production and shipment. The easy to grip head design makes for efficient application and removal by hand or hand tool.

{0} variants (Filters applied) {0} variants (No filters applied)

Compression Fit Plugs

In stock In production

Yellow LDPE Compression Fit Plugs are specially designed to protect DKO-compression fittings (24 nipple with O-Ring) from damage and contaminants during transit, storage and processing. The flexible fin provides a firm and secure fit into the DKO swivel nut and the side pull tab allows for efficient removal.

{0} variants (Filters applied) {0} variants (No filters applied)

Anti-Vibration Plugs - LDPE

In stock In production

Anti-Vibration Plugs are ideal for BSP hydraulic fittings. The notched thread design allows our anti-vibration plugs to prevent parts coming loose during movement. These hydraulic plugs are manufactured in a transparent colour allowing easy inspection of fitted O-rings

{0} variants (Filters applied) {0} variants (No filters applied)

Tapered Caps & Plugs - Standard

In stock In production

Standard Tapered Caps & Plugs are designed for each part to cap multiple O.D.’s or plug multiple I.D.’s. The durable material protects against damage, dirt, moisture and corrosion during storage and shipping.

{0} variants (Filters applied) {0} variants (No filters applied)

Pull Tab Hose Plugs

In stock In production

Our Pull Tab Hose Plugs feature a large pull tab which allows easy removal. Pull Tab Hose Plugs are ideal for plugging hydraulic hoses, and they feature ribs which provide comfortable fit without stretching the hose. The yellow EVA material in Pull Tab Hose Plugs provides good tensile strength, toughness and increased flexibility

{0} variants (Filters applied) {0} variants (No filters applied)

Tapered Caps & Plugs - Heavy Duty

In stock In production

These LDPE Heavy Duty Tapered Caps & Plugs include a rugged wall and seal rings for maximum protection. The tapered profile allows the versatile part to plug multiple internal diameters or cap various external diameters. Our range is available in either Red or White.

{0} variants (Filters applied) {0} variants (No filters applied)

Threaded Protection Plugs - Quick Fit

In stock In production

Threaded Protection Plugs - Quick Fit are widely used in hydraulic, pneumatic and general engineering industries. They come with a knurled head to easily grip the head and the short thread allows a quick fit on the part. Suitable for Metric, BSP and UNF thread sizes.

{0} variants (Filters applied) {0} variants (No filters applied)

Ribbed Pipe End Caps

In stock In production

These Ribbed Pipe End Caps are non-threaded and are available in either Red or Yellow, we offer a wide range of sizes to suit your application. They are ideal for protecting threaded or non-threaded pipes, tubes or rods. Standard, short and long caps are available. The short versions are for general purpose closure and the long versions have an extra depth and feathered edge which ensure a tight fit. The design of these longer caps helps to prevent accidental displacement.

{0} variants (Filters applied) {0} variants (No filters applied)

Snap Fit Plugs

In stock In production

Snap Fit Plugs have a single turn providing tight fit once pushed into position. The plug is design with a centre tab to allow a strong grip for tightening and easy removal. The range is suitable for Metric, BSP and UNF threads.

{0} variants (Filters applied) {0} variants (No filters applied)

Threaded Protection Caps - Metric Threads

In stock In production

These Polyethylene Threaded Protection Caps are used throughout the automotive, fluid power and engineering industries. They protect threaded components from dust, moisture and damage. They are suitable for Metric threads. Our range is available in Yellow or Red and a wide choice of sizes, to suit your application needs.

{0} variants (Filters applied) {0} variants (No filters applied)

Banjo Union Plugs

In stock In production

Our Banjo Union Plugs offered in natural LDPE are ideally suited to prevent ingress of dirt and moisture. They fit banjo unions DIN 7642 B/E.

{0} variants (Filters applied) {0} variants (No filters applied)
  • of 2