Screws

Joint Connector Bolts are used with Joint Connector Nuts & Barrel Nuts. They are ideal for use with self-assembly and flat pack furniture and are applied with an M4 Allen key. Our customers regularly purchase our Cross Dowel Barrel Nuts too.

Hexagonal head socket set screw can be tightened or loosened using a hex head tool.

Countersunk screws are ideal for applications where there can be no protruding head on show

Screw the threaded part and the receptacle together in seconds for a quick, easy and secure binding component. This is the male or threaded side. The female receptacle parts are sold separately.

These Thumb Screws have a wing shaped Nylon Plastic head for extra grip when tightening.

Steel screws are made from heat treated alloy. Stainless screws are not heat treated.

These philips head shoulder screws are meant to be used in conjunction with the VG series vibration grommets. Other ranges that are customers browse when buying Philips Head Shoulder screws are Standard Hex Nuts – available in both metal and plastic.

Suitable to be fastened using the socket shaped head with a hex key

Torx Head Flanged Cap Screws are the ideal fasteners for mechanically securing materials. They are lightweight and resistant to corrosion, oil, abrasion and most chemicals. Installed with Torx tools.

Cap screws with a hexagonal shaped head, available in numerous materials and sizes

Thumb screws are easy to apply and fasten. Ideal for applications where space is restricted and fastening with a tool is not possible

With a pointed head style to enable the screw to self-tap into a panel. This cuts down the speed and manual labour required for fastening.

Our range of Torx Head Sheet Metal Screws are designed to prevent cam-out and the torque-limiting driver design helps to achieve a consistent desired torque. They are self-tapping to aid installation

Cheese head screws are suitable in applications where the head is not seen. These head styles have a cylindrical outer edge. Our customers often browse and buy from our Knurled Thumb Nut range when selecting our Cheese Head Screws.

Square head screws can be used where round head screws are not suitable due to shape or space restrictions

Screw the threaded part and the receptacle together in seconds for a quick, easy and secure binding component. This is the male or threaded side. The female receptacle parts are sold separately. Male and female parts are sold separately.

Screw the threaded part and the receptacle together in seconds for a quick, easy and secure binding component. This is the female or receptacle side. The male threaded parts are sold separately.

These are socket head screw caps with a torx head. Available in numerous sizes and made of PEEK material and are often purchased with our Plastic Standard Hex Nuts by our customers.

A disc style head with chamfered outer edge

A disc style head with chamfered outer edge

A Mushroom Head Machine Screw has a curved head for an aesthetic finish

Essentra's Confirmat screws are made of zinc plated steel. They are used for easy assembly and dismantling of panels. The deep cutting thread ensures accurate and close-fitting joints. The screws are tightened and loosened using Allen keys.

Screw the threaded part and the receptacle together in seconds for a quick, easy and secure binding component. Supplied in sets that include the screw and receptacle. Made from HDPE.

The socket head bolts and screws are the ideal fasteners for mechanically securing materials. They are lightweight and resistant to corrosion, oil, abrasion and most chemicals. Commonly used in machine parts, die fixturing and clamping. The socket enables driving where there is not sufficient space for wrenches or sockets. Available in PEEK material and regularly bought with our Plastic Standard Hex Nuts.

Fast and easy to push on panel fasteners that screw to tighten further