Push Fit Hydraulic Application Caps & Plugs
(24 product groups)
Banjo Bolt Caps
Featuring a Protection Cap and Retaining Washer in one unit; Banjo Bolt Caps hold everything together during assembly, storage and shipment, while protecting against damage and dirt ingress. They are easy to grip, even when wearing gloves. Our Banjo Bolt Caps are offered in Black Low-Density Polyethylene and a range of sizes to suit your application.
Banjo Union Caps
Banjo union caps provide external protection of Banjo connectors against dirt ingress during transportation and storage. The range is available in Flexible PVC fitted with a finger tab for quick removal or HDPE for a snap fit into the Banjo.
Banjo Union Plugs
Our Banjo Union Plugs offered in natural LDPE are ideally suited to prevent ingress of dirt and moisture. They fit banjo unions DIN 7642 B/E. Coming with either a tab cover or without any tab.
Centre Pull Tab Hose Plug
Our Pull Tab Hose Plugs feature a large pull tab which allows easy removal. Pull Tab Hose Plugs are ideal for plugging hydraulic hoses, and they feature ribs which provide comfortable fit without stretching the hose. The yellow EVA material in Pull Tab Hose Plugs provides good tensile strength, toughness and increased flexibility
DKO Side Release Plugs
Yellow LDPE Compression Fit Plugs are specially designed to protect DKO-compression fittings (24 nipple with O-Ring) from damage and contaminants during transit, storage and processing. The flexible fin provides a firm and secure fit into the DKO swivel nut and the side pull tab allows for efficient removal.
Flanged Caps are designed to protect the thread of studs. They are used throughout the automotive and engineering industries for general protection uses. The flanges on the profiles have different sizes allowing a socket wrench to function without removing the protection. We offer a selection of materials, including; LDPE, TPR, PVC and Silicone. Our range also includes colour options; Natural, Red and Black and wide choice of sizes to suit your application needs.
Hexagonal Caps are used to protect all common hydraulic coupling sizes. The design is suitable for protecting round components too and are fitted with a central tab for easy removal. They are suitable for Metric, BSP and UNF sizes. Our Hexagonal Caps range are made from Polyethylene and come in a Natural finish.
Hose Washer Caps
Available in LDPE or TPR, these Hose Washer Caps are applied on hose and tube ends in order to prevent them from sliding over the fittings. Our range includes Yellow and Black colour options and offers a range of sizes to suit your application needs.
Non-Threaded End Caps
Our Non-threaded End Caps are available in wide selection of sizes and are made from Low-Density Polyethylene, in blue. They are ideal for protecting threaded or non-threaded tubing, pipes and rods. Standard, short and long caps are available. The short versions are for general purpose closure and the long versions have an extra depth and feathered edge which ensure a tight fit. The design of these longer caps helps to prevent accidental displacement.
O-Ring Face Seal Caps
Our Blue Polyethylene O-Ring Face Seal Caps are designed to protect O-Ring Face Seal Connectors used on hydraulic connections. The longer overall length includes a moulded retaining ring at the bottom that snaps under the connector to keep it securely in place during transit and processing. Our range offers a variety of sizes to suit your application.
Pull Tab Caps
Our Vinyl Pull Tab Caps have a large pull tab allowing easy removal from the component. The PVC or EVA material used for these ranges provide good tensile strength, toughness and increased flexibility. Our range includes colour options; Black, Red and Yellow, with a wide choice of sizes to suit your application needs.
Push-in Plugs, also referred to as bungs are a versatile option to blank a variety of holes or bores during transportation, paint process or on a finished product. These LDPE plugs protect the handler from rough surfaces from cut holes. The Bung can also be used to protect internal threads. Additionally, the plugs can be used to mask and protect holes during a low temperature paint process. Available with either a flat or domed head these plugs are also offered in a variety of colours so can be used for colour identification or to match a finished product aesthetics. The advantage of these plugs is that they are simple to apply, with a simple push in motion.
Quick Release Caps
Hydraulic Quick Release Dust Caps are female fitting suitable to protect quick release couplings series ISO A and ISO B. They are designed to remain attached to the hose and offer excellent protection from dirt, moisture and corrosion. These caps are made from TPE and are available in several colour options; Blue, Green, Red and Yellow. Our range also offers a variety of size options to suit your application.
Quick Release Plugs
Hydraulic Quick Release Dust Plugs are male fitting suitable to plug ISO A and ISO B series. They are designed to remain attached to the hose and they offer excellent protection from dirt, moisture and corrosion.
Ribbed Pipe End Caps
These Ribbed Pipe End Caps are non-threaded and are available in either Red or Yellow, we offer a wide range of sizes to suit your application. They are ideal for protecting threaded or non-threaded pipes, tubes or rods. Standard, short and long caps are available. The short versions are for general purpose closure and the long versions have an extra depth and feathered edge which ensure a tight fit. The design of these longer caps helps to prevent accidental displacement.
Round End Caps - Standard
Standard Round End Caps are non-threaded and available in a wide range of sizes. They are ideal for protecting threaded or non-threaded tubing, pipes and rods. Standard, short and long caps are available. The short versions are for general purpose closure and the long versions have an extra depth and feathered edge which ensure a tight fit. The design of these longer caps helps to prevent accidental displacement. All are available in a wide range of sizes
Round Vinyl End Caps
These Push-fit Round Vinyl End Caps are made from flexible PVC and can stretch on to larger dimensions for a snug fit without tearing, splitting, or shredding. The glossy and attractive finish makes this cap ideal for use as a decorative end cap. Our range is offered in Black or Red colour options.
Side Release Plugs
Our Side Release Plugs provide easy removal for re-use or disposal. The LDPE Plugs protect holes and bores from ingress and dirt. Coming with either a smooth barrel or ribbed version offering different tightness of fit on application.
Standard Round End Caps
Standard round end caps, also referred to as protection caps are a versatile option to cover holes or threads during transportation, paint process or on a finished product. These LDPE caps can be used on tubes, pipes or rods. Available in either red or natural, there are three shapes, ranging from short caps to cover holes to longer caps which will cover long threads. These caps are easily applied by pushing onto application and can be re-used upon application removal. Customers that purchase our Standard Round End Caps regularly buy our Protective Netting.
Tapered Caps & Plugs - Heavy Duty
These LDPE Heavy Duty Tapered Caps & Plugs include a rugged wall and seal rings for maximum protection. The tapered profile allows the versatile part to plug multiple internal diameters or cap various external diameters. Our range is available in either Red or White.
Tapered Caps & Plugs - Standard
Standard Tapered Caps & Plugs are designed for each part to cap multiple O.D.’s or plug multiple I.D.’s. The durable material protects against damage, dirt, moisture and corrosion during storage and shipping.
Tapered Caps & Plugs - Wide Flange
The wide flange of these LDPE Tapered Caps & Plugs provides greater protection and easy removal. Designed for use as both a cap and a plug, they provide excellent protection from damage, dirt, moisture and corrosion during storage and transportation. Our range is available in Blue and Red.
Tear Tab Caps
These LDPE Tear Tab Caps are a rapid solution to fit and remove from the part. By pulling the tab, the cap splits wide open offering an easy solution to numerous applications. The range is suitable to UNF and NPT threads and is available in Natural, Blue and Yellow colours. We offer a wide range of sizes to suit many application needs.
Tube End Caps
Tube End Caps offer ideal protection for threaded or non-threaded tubing, pipes and rods. Standard, short and long caps are available. The short versions are for general purpose closure and the long versions have an extra depth and feathered edge that ensure a tight fit. The design of these longer caps helps to prevent accidental displacement. Tube End Caps serve the same purpose as Heat Shrink End Caps but do not shrink when heated during the application process. They are UV and weather resistant, making them ideal outdoor applications.