Hydraulic Application Caps & Plugs

We found 41 product types for Hydraulic Application Caps & Plugs

Need a Quote?

For large volumes and customised products, add to your cart and click request a quote, or email sales@essentracomponents.it and we will respond within 2 working days

Filter Products

  • of 2
List Grid

Tube End Caps

In stock In production

Standard Round End Caps are non-threaded and available in a wide range of sizes. They are ideal for protecting threaded or non-threaded tubing, pipes and rods. Standard, short and long caps are available. The short versions are for general purpose closure and the long versions have an extra depth and feathered edge which ensure a tight fit. The design of these longer caps helps to prevent accidental displacement. All are available in a wide range of sizes

{0} variants (Filters applied) {0} variants (No filters applied)

Standard Round End Caps

In stock In production

Standard Round End Caps are non-threaded and available in a wide range of sizes. They are ideal for protecting threaded or non-threaded tubing, pipes and rods. Standard, short and long caps are available. The short versions are for general purpose closure and the long versions have an extra depth and feathered edge which ensure a tight fit. The design of these longer caps helps to prevent accidental displacement. All are available in a wide range of sizes

{0} variants (Filters applied) {0} variants (No filters applied)

Ribbed Pipe End Caps

In stock In production

Standard Round End Caps are non-threaded and available in a wide range of sizes. They are ideal for protecting threaded or non-threaded tubing, pipes and rods. Standard, short and long caps are available. The short versions are for general purpose closure and the long versions have an extra depth and feathered edge which ensure a tight fit. The design of these longer caps helps to prevent accidental displacement. All are available in a wide range of sizes

{0} variants (Filters applied) {0} variants (No filters applied)

Non-Threaded End Caps

In stock In production

Standard Round End Caps are non-threaded and available in a wide range of sizes. They are ideal for protecting threaded or non-threaded tubing, pipes and rods. Standard, short and long caps are available. The short versions are for general purpose closure and the long versions have an extra depth and feathered edge which ensure a tight fit. The design of these longer caps helps to prevent accidental displacement. All are available in a wide range of sizes

{0} variants (Filters applied) {0} variants (No filters applied)

Hose Washer Caps

In stock In production

Hose Washer Caps are applied on hose and tube ends in order to prevent them from sliding over the fittings.

{0} variants (Filters applied) {0} variants (No filters applied)

Flanged Caps

In stock In production

Flanged Caps are designed to protect the thread of studs. They are used throughout the automotive and engineering industries for general protection. The flanges on the profiles have different sizes allowing socket wrench to function without removing the protection.

{0} variants (Filters applied) {0} variants (No filters applied)

Pull Tab Caps

In stock In production

Pull Tab Caps have a large pull tab allowing easy removal from the component. The PVC or EVA material used for these ranges provide good tensile strength, toughness and increased flexibility.

{0} variants (Filters applied) {0} variants (No filters applied)

Tear Tab Caps

In stock In production

Tear Tab Caps are easy and rapid solution to remove the cap from the part. By png the tab, the cap split wide open offering an easy solution to numerous applications. The range is suitable to UNF and NPT threads.

{0} variants (Filters applied) {0} variants (No filters applied)

Tapered Caps & Plugs - Standard

In stock In production

Standard Tapered Caps & Plugs are designed for each part to cap multiple O.D.’s or plug multiple I.D.’s. The durable material protects against damage, dirt, moisture and corrosion during storage and shipping.

{0} variants (Filters applied) {0} variants (No filters applied)

Tapered Caps & Plugs - Heavy Duty

In stock In production

LDPE Heavy Duty Tapered Caps & Plugs include a rugged wall and seal rings for maximum protection. The tapered profile allows the versatile part to plug multiple I.D.’s or cap multiple O.D.’s

{0} variants (Filters applied) {0} variants (No filters applied)

Tapered Caps & Plugs - Wide Flange

In stock In production

The large flange on this series of Tapered Caps/Plugs provides greater protection and easy removal. Designed for use as both a cap and a plug, Large Flange Tapered Caps/Plugs provide excellent protection from damage, dirt, moisture and corrosion during storage and transportation.

{0} variants (Filters applied) {0} variants (No filters applied)

Threaded Protection Caps - UNF/JIC Threads

In stock In production

Threaded Protection Caps are used throughout the automotive, fluid power and engineering industries. They protect threaded components from dust, moisture and damage. The range is suitable for UNF/JIC threads.

{0} variants (Filters applied) {0} variants (No filters applied)

Threaded Protection Caps - Metric Threads

In stock In production

Threaded Protection Caps are used throughout the automotive, fluid power and engineering industries. They protect threaded components from dust, moisture and damage. The range is suitable for Metric threads.

{0} variants (Filters applied) {0} variants (No filters applied)

Threaded Protection Caps - BSP/Gas Threads

In stock In production

Threaded Protection Caps are used throughout the automotive, fluid power and engineering industries. They protect threaded components from dust, moisture and damage. The range is suitable for BSP/Gas threads.

{0} variants (Filters applied) {0} variants (No filters applied)

Threaded Sealing Caps - UNF Threads

In stock In production

UNF Threaded Sealing Caps protect and limit fluid leakage. These HDPE caps are resistant to solvents and reduce potential shearing. A neoprene sealing disk limits fluid leakage and the hexagonal head can be tightened by a wrench or socket at low torque but is hand tightening is recommended. You may also wish to browse our Threaded Plugs.

{0} variants (Filters applied) {0} variants (No filters applied)

Threaded Sealing Caps - Metric Threads

In stock In production

Metric Threaded Sealing Caps are fitted with an internal neoprene rubber sealing disk to limit contamination from deposit and entry of particules. They are suitable to protect metric threads. While hand tightening is recommended, the cap can be applied or removed by spanner or socket at a low torque.

{0} variants (Filters applied) {0} variants (No filters applied)

Threaded Sealing Caps - BSP/Gas Threads

In stock In production

Threaded Sealing Caps are used throughout the automotive, fluid power and engineering industries. They are recommended to be tightened by hand although the hexagonal head enables the cap to be applied or removed by spanner or socket at a low torque. The cap is fitted with an internal neoprene rubber sealing disk to limit fluid leakage. Suitable for BSP/Gas threads.

{0} variants (Filters applied) {0} variants (No filters applied)

Banjo Union Plugs

In stock In production

Our Banjo Union Plugs offered in natural LDPE are ideally suited to prevent ingress of dirt and moisture. They fit banjo unions DIN 7642 B/E.

{0} variants (Filters applied) {0} variants (No filters applied)

Compression Fit Plugs

In stock In production

Yellow LDPE Compression Fit Plugs are specially designed to protect DKO-compression fittings (24 nipple with O-Ring) from damage and contaminants during transit, storage and processing. The flexible fin provides a firm and secure fit into the DKO swivel nut and the side pull tab allows for efficient removal.

{0} variants (Filters applied) {0} variants (No filters applied)

Pull Tab Hose Plugs

In stock In production

Our Pull Tab Hose Plugs feature a large pull tab which allows easy removal. Pull Tab Hose Plugs are ideal for plugging hydraulic hoses, and they feature ribs which provide comfortable fit without stretching the hose. The yellow EVA material in Pull Tab Hose Plugs provides good tensile strength, toughness and increased flexibility

{0} variants (Filters applied) {0} variants (No filters applied)

Side Release Plugs

In stock In production

Our Side Release Plugs feature a continuous sealing lip and a strong flexible side-tab. These ergonomic plugs are made of natural LDPE. Plug designed with rounded body ensures a low-abrasion fit.

{0} variants (Filters applied) {0} variants (No filters applied)

Quick Release Plugs

In stock In production

Hydraulic Quick Release Dust Plugs are male fitting suitable to plug ISO A and ISO B series. They are designed to remain attached to the hose and they offer excellent protection from dirt, moisture and corrosion.

{0} variants (Filters applied) {0} variants (No filters applied)

Push-In Plugs

In stock In production

Push-in Plugs are easy solution offering a quick fitting and are suitable for most applications. Provides all the advantages of a threaded plug with the ease of a push-in style.

{0} variants (Filters applied) {0} variants (No filters applied)

Anti-Vibration Plugs - LDPE

In stock In production

Anti-Vibration Plugs are ideal for BSP hydraulic fittings. The notched thread design allows our anti-vibration plugs to prevent parts coming loose during movement. These hydraulic plugs are manufactured in a transparent colour allowing easy inspection of fitted O-rings

{0} variants (Filters applied) {0} variants (No filters applied)

Slottex Plugs

In stock In production

Slottex Plugs are screw on protection plugs that can be applied or removed with screwdriver, spanner or socket. They can be tightened manually or with power tool. The range cover a large offering of dimensions suitable for Metric threads, BSP threads and UNF threads.

{0} variants (Filters applied) {0} variants (No filters applied)
  • of 2