Fibre Optic Cable Management

We found 53 product types for Fibre Optic Cable Management

Need a Quote?

For large volumes and customised products, add to your cart and click request a quote, or email sales@essentracomponents.se and we will respond within 2 working days

Filter Products

  • of 3
List Grid

Fibre Splice Trays - System, Storage

In stock In production

Fibre Splice Trays & Protectors are ideal for eliminating the potential hazard of macro and micro bends which can occur during the mishandling of optical fibres. The trays are stackable to any number and inter-tray fibre routing is possible. They can be used with splice holders, splice protectors and bend limiting tubing. The moulded-in features of the trays maintain the bend radius at 30mm, They accept Isolator Clips EFA04 61, 63 and 64 001 for holding splicing components. They also accept a 16 way Fibre Clip EFA04 06 and 08 001 broken into a 4 way segment for holding splicing components

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Cutout Adapters

In stock In production

Fibre Cut-out Adapters convert a hole cut-out for an SC connector into a hole cut-out for an ST connector. The Optical Fibre Duplexer enables cable with aramid strands to be broken out and mechanically terminated.

{0} variants (Filters applied) {0} variants (No filters applied)

Dust cap - Cover/PVC

In stock In production

Connector Adapter Dust Caps provide environmental protection for SMA, ST, and FC connector adapters. The flexible PVC material is durable and provides a snug fit.

{0} variants (Filters applied) {0} variants (No filters applied)

Connector Dust Caps with Lanyard

In stock In production

Fibre Dust Caps and Dust Caps with Metal Chain prevent unwanted foreign bodies and dirt getting into fibres and wires.

{0} variants (Filters applied) {0} variants (No filters applied)

Wire Saddle - Optical Fibre

In stock In production

The wire saddles are suitable for fibre wires and protecting their delicate nature.

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Clips - 4 Slot, 8 Cables, 3mm, Snap In

In stock In production

The Fibre Management range supports Optical Fibre Brackets which are plug-in for an ease of installation. They are 4 slot but will hold 8 cable of 3mm diameter and have an anti-rotation pin which prevents fibre kinking due to the bracket turning in the mounting hole

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Clips - 4 Slot, 3mm, Adhesive Mount

In stock In production

Optical Fibre Holders on a Base will hold 4 cables of 3mm diameter and are supplied on a double sided adhesive mount for easy installation and removal

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Clips - 16 Slot - 3mm, 2mm

In stock In production

16 Way Fibre Clip can be broken apart to form 3 individual clips holding 4, 4 and 8 components. A broken apart 4-way can be used in the Splice Tray EFA04 25 001

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Bracket - Quarter Turn

In stock In production

The range of Fibre Management products supports rack brackets which mount into a 19" rack with a quarter turn. These can be used to run optical fibre alongside a racking unit

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Guides - Corner

In stock In production

The Fibre Management range supports many low profile fibre reels for spooling excess fibre onto a PCB board. Some reels can be broken apart to form a controlled bend around a 90 or 180 degree turn. The range also offers stacking pillars and stand-offs which can be used to stack multiple reels for compact spooling of multiple runs of fibre. Fibre Guides are used to assist with reeling and corner guides maintain a bending radius through a 90 degree turn

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Guides - Flexible Spacers & Holders

In stock In production

The Fibre Management range supports many low profile fibre reels for spooling excess fibre onto a PCB board. Some reels can be broken apart to form a controlled bend around a 90 or 180 degree turn. The range also offers stacking pillars and stand-offs which can be used to stack multiple reels for compact spooling of multiple runs of fibre. Fibre Guides are used to assist with reeling and Optical Flexible Fibre Guide Systems are used with 250 and 900 micron fibres. The Fibre can enter and exit at any point without risk of the fibre snagging or kinking

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Reels - Base for Storage

In stock In production

The Fibre Management range supports many low profile fibre reels for spooling excess fibre onto a PCB board. Some reels can be broken apart to form a controlled bend around a 90 or 180 degree turn. Optical Fibre Support Bases are available designed for use in fibre optic patch panel applications

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Bend Limiting Tubing

In stock In production

Optical Fibre Bend Limiting Tubing offers the ultimate protection to fibres eliminating problems such as crushing, kinking and micro bending whilst supplying an entire self-managing solution to managing the routing of fibre

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Clips - 3 Slot - 3mm

In stock In production

3 Slot Fibre Clips are designed to hold three 3mm diameter fibres or other components such as couplers, splice protectors or WDM's

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Clips - 6 or 12 Slot, 3mm or 1.2mm,Splice Holder

In stock In production

Splice Holders are designed to hold up to 6 x 3mm Fibre or components such as couplers, splice protectors and WDM's. The OFSH-T Splice Holders can be used with OFST series splice trays

{0} variants (Filters applied) {0} variants (No filters applied)

Strain Relief Bushings - Fibre Strain Relief Gland

In stock In production

Strain Relief Bushings are effortless to install as they can be inserted without the use of any tools whilst still providing protection to wire and fibre against rough panel hole edges. Fibre Strain relief glands provide added protection to jacketed and bare fibre while routed through a hole

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Bend Limiting Tubing - Clips, Standoff

In stock In production

Fibre Bend Limiting Tubing can be mounted using Tube and Pip Clips such as the Standoff Clips. These are simple to install and come in two different material types

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Bend Limiting Tubing - 1 to 4 Breakout

In stock In production

The 1 into 4 Optical Fibre Manifold enables small multiple fibrecables with aramid and similar strength reinforcement or central. GRP strength member to be mechanically and securely terminated. The manifold is stackable, and retains tubes greater than 100N. A development kit is also available that contains all adapters, OFM-4-05-19BLK

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Clips - 3 Slot, 6 Cables, 3mm, Adhesive Mount

In stock In production

Optical Fibre Expandable Brackets are 3 slot but can hold up to 6 cables of 3mm diameter. They have an adhesive mount for easier installation

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Clips - 4 Slot, 4 or 12 Cables, 2.7 or 4.2mm,Splice Holder

In stock In production

Optical Fibre Splice Holders hold 12 x 2.7mm or 4 x 4.2mm splices and fasten with either a self-adhesive pad provided or via a screw or rivet

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Clips - 16 Slot - 3.9mm, 3.4mm, 2.9mm

In stock In production

16 Slot Fibre Clips are designed to hold six 3.4mm, 3.9mm or 2.9mm diameter fibres. They can form a part of the larger EFA04 18 fibre clip which can be broken down to form individual clips which provides plenty of versatility

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Clips - 3 & 5 Slot, 6 & 9 Cables, 2mm, Snap In

In stock In production

The Fibre Management range supports Optical Fibre Brackets which are snap-in for an ease of installation. Both 3 and 5 slot mounting brackets are available

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Clips - 24 Slot, Splice Holder

In stock In production

24-Way Splice Holders are designed to hold up to 24 Splices or components and come with a range of mounting options; either adhesive mounting, no adhesive or screw mount

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Reels - Connecting Chain Plates

In stock In production

Connecting Chain Plates connect together to form a chain for routing fibres. Once the circle is complete, excess fibre spools to form a ‘Y’ for breakout points. These plates have a mounting hole that coordinates with wire routing devices.

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Reel Accessories - Stacking Pillar

In stock In production

This pillar allows for stacking multiple EFA04 fiber reels. Once the desired number of reels are stacked, they are restrained with a spring clip that is included. Pillar is mounted with an included rivet from the bottom of the board.

{0} variants (Filters applied) {0} variants (No filters applied)
  • of 3