Fibre Optic Cable Management

We found 53 product types for Fibre Optic Cable Management

Need a Quote?

For large volumes and customised products, add to your cart and click request a quote, or email sales@essentracomponents.it and we will respond within 2 working days

Filter Products

  • of 3
List Grid

Fibre Bend Limiting Tubing Tools

In stock In production

These OFBLT zip tools are used to install fibre into the OFBLTS slit tubing. The fibre is slid into the side of the tool. This is followed by the slit tubing being fed over the horn of the tool. The tool is then slid into the slit tubing, thus installing the fibre.

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Splice Trays - System, Hinges

In stock In production

Fibre Splice Trays & Protectors are ideal for eliminating the potential hazard of macro and micro bends which can occur during the mishandling of optical fibres. The trays are stackable to any number and inter-tray fibre routing is possible. They can be used with splice holders, splice protectors and bend limiting tubing. The lids, trays and hinges are all sold separately or in a kit: OFST-A-P-1. OFSTH colour coded hinges indicate the side of the tray to open from

{0} variants (Filters applied) {0} variants (No filters applied)

FC Connector Port Dust Caps

In stock In production

FC Connector Port Dust Caps are threaded onto FC connector adapters to provide protection from outside elements. The cost-effective HDPE material is durable and available in a variety of colors.

{0} variants (Filters applied) {0} variants (No filters applied)

ST Connector Dust Cap with Lanyard

In stock In production

ST Connector Dust Caps provide environmental protection to ST connector ports. The flexible TPE material is durable and provides a snug fit while the molded-on lanyard prevents the loss of the cap.

{0} variants (Filters applied) {0} variants (No filters applied)

Wire Saddle - Optical Fibre

In stock In production

The wire saddles are suitable for fibre wires and protecting their delicate nature.

{0} variants (Filters applied) {0} variants (No filters applied)

Wire Saddle - Optical Fibre, Mini

In stock In production

The micro wire saddles are suitable for fibre wires and protecting their delicate nature.

{0} variants (Filters applied) {0} variants (No filters applied)

Ferrule Dust Cap

In stock In production

Ferrule Dust Caps provide environmental protection for 2.5mm ferrules. The flexible TPE material is Ro. HS compliant, durable, and provides a snug fit.

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Splice Trays - System, Storage

In stock In production

Fibre Splice Trays & Protectors are ideal for eliminating the potential hazard of macro and micro bends which can occur during the mishandling of optical fibres. The trays are stackable to any number and inter-tray fibre routing is possible. They can be used with splice holders, splice protectors and bend limiting tubing. The moulded-in features of the trays maintain the bend radius at 30mm, They accept Isolator Clips EFA04 61, 63 and 64 001 for holding splicing components. They also accept a 16 way Fibre Clip EFA04 06 and 08 001 broken into a 4 way segment for holding splicing components

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Cutout Adapters

In stock In production

Fibre Cut-out Adapters convert a hole cut-out for an SC connector into a hole cut-out for an ST connector. The Optical Fibre Duplexer enables cable with aramid strands to be broken out and mechanically terminated.

{0} variants (Filters applied) {0} variants (No filters applied)

Dust cap - Cover/PVC

In stock In production

Connector Adapter Dust Caps provide environmental protection for SMA, ST, and FC connector adapters. The flexible PVC material is durable and provides a snug fit.

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Splice Trays - System, Kit

In stock In production

Fibre Splice Trays & Protectors are ideal for eliminating the potential hazard of macro and micro bends which can occur during the mishandling of optical fibres. The trays are stackable to any number and inter-tray fibre routing is possible. They can be used with splice holders, splice protectors and bend limiting tubing. The lids, trays and hinges are all sold separately or in a kit: OFST-A-P-1

{0} variants (Filters applied) {0} variants (No filters applied)

Connector Dust Caps with Chain

In stock In production

Connector Dust Caps with Chains are threaded onto connector adapters when unmated to provide mechanical and environmental protection. The stainless steel material is suitable for harsh conditions.

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Splice Trays - System, Lid

In stock In production

Fibre Splice Trays & Protectors are ideal for eliminating the potential hazard of macro and micro bends which can occur during the mishandling of optical fibres. The trays are stackable to any number and inter-tray fibre routing is possible. They can be used with splice holders, splice protectors and bend limiting tubing. The lids, trays and hinges are all sold separately or in a kit: OFST-A-P-1

{0} variants (Filters applied) {0} variants (No filters applied)

Connector Dust Caps with Lanyard

In stock In production

Fibre Dust Caps and Dust Caps with Metal Chain prevent unwanted foreign bodies and dirt getting into fibres and wires.

{0} variants (Filters applied) {0} variants (No filters applied)

Strain Relief Bushings - Fibre Boot

In stock In production

Strain Relief Bushings are effortless to install as they can be inserted without the use of any tools whilst still providing protection to wire and fibre against rough panel hole edges

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Guides - Corner

In stock In production

The Fibre Management range supports many low profile fibre reels for spooling excess fibre onto a PCB board. Some reels can be broken apart to form a controlled bend around a 90 or 180 degree turn. The range also offers stacking pillars and stand-offs which can be used to stack multiple reels for compact spooling of multiple runs of fibre. Fibre Guides are used to assist with reeling and corner guides maintain a bending radius through a 90 degree turn

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Clips - 6 or 12 Slot, 3mm or 1.2mm,Splice Holder

In stock In production

Splice Holders are designed to hold up to 6 x 3mm Fibre or components such as couplers, splice protectors and WDM's. The OFSH-T Splice Holders can be used with OFST series splice trays

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Clips - 4 Slot - 3.9mm

In stock In production

4 Slot Fibre Clips are designed to hold four 3.9mm diameter fibres. They can form a part of the larger EFA04 18 fibre clip which can be broken down to form individual clips which provides plenty of versatility

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Reels - Fiber Storage

In stock In production

The Fibre Management range supports many low profile fibre reels for spooling excess fibre onto a PCB board. Some reels can be broken apart to form a controlled bend around a 90 or 180 degree turn. The Fibre Reels are board mountable using standoff EFA04 27 ASS and stackable using Stacking Pillar EFA04 53 ASS

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Splice Protectors

In stock In production

Optical Fibre & Ribbon Fibre Splice Protectors offer added protection in fibre management applications. There are two types available. Both consist of inner and outer tubing's and type 1 includes a stainless steel rod whereas type 2 uses a ceramic rod. They offer high protection for fibre

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Clips - 3 & 5 Slot, 6 & 9 Cables, 2mm, Snap In

In stock In production

The Fibre Management range supports Optical Fibre Brackets which are snap-in for an ease of installation. Both 3 and 5 slot mounting brackets are available

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Clips - 24 Slot, Splice Holder

In stock In production

24-Way Splice Holders are designed to hold up to 24 Splices or components and come with a range of mounting options; either adhesive mounting, no adhesive or screw mount

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Clips - 2 Slot, 2mm, Adhesive Mount

In stock In production

Holds up to four 2mm cables. Each slot can hold 2 cables. Small footprint.

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Manifolds - PTFE Tubing

In stock In production

This is 900 µm PTFE Tubing that comes in a 120 meter coil. It is designed to prtect fiber in the Opticle Fibre Flat manifold.

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Reel Accessories - Stacking Pillar

In stock In production

This pillar allows for stacking multiple EFA04 fiber reels. Once the desired number of reels are stacked, they are restrained with a spring clip that is included. Pillar is mounted with an included rivet from the bottom of the board.

{0} variants (Filters applied) {0} variants (No filters applied)
  • of 3