Fibre Optic Cable Management

We found 53 product types for Fibre Optic Cable Management

Need a Quote?

For large volumes and customised products, add to your cart and click request a quote, or email sales@essentracomponents.hu and we will respond within 2 working days

Filter Products

  • of 3
List Grid

Fibre Bend Limiting Tubing - Clips, Snap in

In stock In production

Fibre Bend Limiting Tubing can be mounted using saddles such as the Snap in Clips. These are simple to install and come in two different types

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Optic Connector Boots

In stock In production

The Fibre Management range provides Fibre Boots which provide strain relief for Micron Fibres. They provide added protection to the fibre while routing through a hole

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Clips - 4 Slot, 3mm, Adhesive Mount

In stock In production

Optical Fibre Holders on a Base will hold 4 cables of 3mm diameter and are supplied on a double sided adhesive mount for easy installation and removal

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Bend Limiting Tubing - Clips, Hinged Top Lock

In stock In production

Fibre Bend Limiting Tubing Clips are snap fitting for easy installation and allow the running of Fibre Bend Limiting Tubing along a panel, enclosure or racking unit. They are hinge fitted which also aids the ease of installation and removal

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Bend Limiting Tubing - Duplexer

In stock In production

These fibre duplexors enable cables with aramid strands to be broken out and mechanically terminated. Tube retention is greater than 100N.

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Clips - 4 Slot, 8 Cables, 3mm, Snap In

In stock In production

The Fibre Management range supports Optical Fibre Brackets which are plug-in for an ease of installation. They are 4 slot but will hold 8 cable of 3mm diameter and have an anti-rotation pin which prevents fibre kinking due to the bracket turning in the mounting hole

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Clips - 16 Slot - 3mm, 2mm

In stock In production

16 Way Fibre Clip can be broken apart to form 3 individual clips holding 4, 4 and 8 components. A broken apart 4-way can be used in the Splice Tray EFA04 25 001

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Bracket - Quarter Turn

In stock In production

The range of Fibre Management products supports rack brackets which mount into a 19" rack with a quarter turn. These can be used to run optical fibre alongside a racking unit

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Guides - Corner

In stock In production

The Fibre Management range supports many low profile fibre reels for spooling excess fibre onto a PCB board. Some reels can be broken apart to form a controlled bend around a 90 or 180 degree turn. The range also offers stacking pillars and stand-offs which can be used to stack multiple reels for compact spooling of multiple runs of fibre. Fibre Guides are used to assist with reeling and corner guides maintain a bending radius through a 90 degree turn

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Guides - Flexible Spacers & Holders

In stock In production

The Fibre Management range supports many low profile fibre reels for spooling excess fibre onto a PCB board. Some reels can be broken apart to form a controlled bend around a 90 or 180 degree turn. The range also offers stacking pillars and stand-offs which can be used to stack multiple reels for compact spooling of multiple runs of fibre. Fibre Guides are used to assist with reeling and Optical Flexible Fibre Guide Systems are used with 250 and 900 micron fibres. The Fibre can enter and exit at any point without risk of the fibre snagging or kinking

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Reels - Base for Storage

In stock In production

The Fibre Management range supports many low profile fibre reels for spooling excess fibre onto a PCB board. Some reels can be broken apart to form a controlled bend around a 90 or 180 degree turn. Optical Fibre Support Bases are available designed for use in fibre optic patch panel applications

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Bend Limiting Tubing Tools

In stock In production

These OFBLT zip tools are used to install fibre into the OFBLTS slit tubing. The fibre is slid into the side of the tool. This is followed by the slit tubing being fed over the horn of the tool. The tool is then slid into the slit tubing, thus installing the fibre.

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Bend Limiting Tubing

In stock In production

Optical Fibre Bend Limiting Tubing offers the ultimate protection to fibres eliminating problems such as crushing, kinking and micro bending whilst supplying an entire self-managing solution to managing the routing of fibre

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Bend Limiting Tubing - Clips, Slotted

In stock In production

Optical Fibre Slotted Multi Brackets are designed using Miniflex technology. They are used at distribution points where orderly fibre management, protection and strain relief are required. An additional security feature allows fitting of a cable tie around the part which prevents removal of any retained tubes. They will hold a maximum of 12 tubes

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Clips - 3 Slot - 3mm

In stock In production

3 Slot Fibre Clips are designed to hold three 3mm diameter fibres or other components such as couplers, splice protectors or WDM's

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Clips - 2 Slot - 6mm, 5.5mm, 4.5mm

In stock In production

2 Slot Fibre Clips are designed for use in the Array Tray EFA04-25-001. They can be screw mounted or mounted with self adhesive pads. They act as an Isolator Clip

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Clips - 6 or 12 Slot, 3mm or 1.2mm,Splice Holder

In stock In production

Splice Holders are designed to hold up to 6 x 3mm Fibre or components such as couplers, splice protectors and WDM's. The OFSH-T Splice Holders can be used with OFST series splice trays

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Bracket - Coiling Clip

In stock In production

Optical Fibre Coiling Clips include two extruded clips which snap into each other to form a clip with a smooth, curved surface to accommodate fibre optic bundles

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Clips - 4 Slot - 3.9mm

In stock In production

4 Slot Fibre Clips are designed to hold four 3.9mm diameter fibres. They can form a part of the larger EFA04 18 fibre clip which can be broken down to form individual clips which provides plenty of versatility

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Guides - Flexible

In stock In production

The Fibre Management range supports many low profile fibre reels for spooling excess fibre onto a PCB board. Some reels can be broken apart to form a controlled bend around a 90 or 180 degree turn. The range also offers stacking pillars and stand-offs which can be used to stack multiple reels for compact spooling of multiple runs of fibre. Fibre Guides are used to assist with reeling and Optical Flexible Fibre Guide Systems are used with 250 and 900 micron fibres. The Fibre can enter and exit at any point without risk of the fibre snagging or kinking

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Splice Protectors

In stock In production

Optical Fibre & Ribbon Fibre Splice Protectors offer added protection in fibre management applications. There are two types available. Both consist of inner and outer tubing's and type 1 includes a stainless steel rod whereas type 2 uses a ceramic rod. They offer high protection for fibre

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Bend Limiting Tubing - 1 to 4 Breakout

In stock In production

The 1 into 4 Optical Fibre Manifold enables small multiple fibrecables with aramid and similar strength reinforcement or central. GRP strength member to be mechanically and securely terminated. The manifold is stackable, and retains tubes greater than 100N. A development kit is also available that contains all adapters, OFM-4-05-19BLK

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Clips - 3 Slot, 6 Cables, 3mm, Adhesive Mount

In stock In production

Optical Fibre Expandable Brackets are 3 slot but can hold up to 6 cables of 3mm diameter. They have an adhesive mount for easier installation

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Clips - 4 Slot, 4 or 12 Cables, 2.7 or 4.2mm,Splice Holder

In stock In production

Optical Fibre Splice Holders hold 12 x 2.7mm or 4 x 4.2mm splices and fasten with either a self-adhesive pad provided or via a screw or rivet

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Clips - 16 Slot - 3.9mm, 3.4mm, 2.9mm

In stock In production

16 Slot Fibre Clips are designed to hold six 3.4mm, 3.9mm or 2.9mm diameter fibres. They can form a part of the larger EFA04 18 fibre clip which can be broken down to form individual clips which provides plenty of versatility

{0} variants (Filters applied) {0} variants (No filters applied)
  • of 3