Hose Protection

Anti-Vibration Plugs are ideal for BSP hydraulic fittings. The notched thread design allows our anti-vibration plugs to prevent parts coming loose during movement. These hydraulic plugs are manufactured in a transparent colour allowing easy inspection of fitted O-rings

Featuring a Protection Cap and Retaining Washer in one unit; Banjo Bolt Caps hold everything together during assembly, storage and shipment, while protecting against damage and dirt ingress. They are easy to grip, even when wearing gloves. Our Banjo Bolt Caps are offered in Black Low-Density Polyethylene and a range of sizes to suit your application.

Banjo union caps provide external protection of Banjo connectors against dirt ingress during transportation and storage. The range is available in Flexible PVC fitted with a finger tab for quick removal or HDPE for a snap fit into the Banjo.

Our Banjo Union Plugs offered in natural LDPE are ideally suited to prevent ingress of dirt and moisture. They fit banjo unions DIN 7642 B/E. Coming with either a tab cover or without any tab.

Barbed Fitting Tees

Bonded Washers, also known as Bonded Seals or Sealing Washers, are a type of washer used to provide sealing properties for screws and bolts. Commonly used in applications that need a stronger seal than typical washers can provide.

Our Bonded Washer range consists of Nitrile Washers; made from Steel and with a Nitrile Rubber 80 seal. Ideal for applications that have hydraulic fluids or engine lubricating oils.

• BSP and Metric thread types.

Breather caps are parts used to protect equipment against moisture and particle contamination.

Our Pull Tab Hose Plugs feature a large pull tab which allows easy removal. Pull Tab Hose Plugs are ideal for plugging hydraulic hoses, and they feature ribs which provide comfortable fit without stretching the hose. The yellow EVA material in Pull Tab Hose Plugs provides good tensile strength, toughness and increased flexibility

Yellow LDPE Compression Fit Plugs are specially designed to protect DKO-compression fittings (24 nipple with O-Ring) from damage and contaminants during transit, storage and processing. The flexible fin provides a firm and secure fit into the DKO swivel nut and the side pull tab allows for efficient removal.

Standard and Premium Fire Protection Sleeves are supported by the hose protection range offering high performance flexible protection cover for cables, hydraulic leads and rubber hose lines. Fire Protection Sleeve gives a protection against high temperatures, radiation heat, direct flames and liquid metal splashes. The inner sleeve has good insulation properties with a 700 degree service temperature. The red silicone cover of the standard sleeve is self extinguishing and is highly flexible allowing easy application to curved or irregular shapes. The Premium sleeve has a thick extruded silicone outer cover which will keep it's shape well allowing easy application onto straight hoses, pipes and cables

Flanged Caps are designed to protect the thread of studs. They are used throughout the automotive and engineering industries for general protection uses. The flanges on the profiles have different sizes allowing a socket wrench to function without removing the protection. We offer a selection of materials, including; LDPE, TPR, PVC and Silicone. Our range also includes colour options; Natural, Red and Black and wide choice of sizes to suit your application needs.

Prismatic Fluid Level Indicator Caps are resistant to solvents, oils, greases, and other chemical agents. The prismatic windows allow the viewing of liquid levels in various applications and are resistant to oils and solvents.

Our Gas Cylinder Valve Protectors, developed in conjunction with major European gas companies, protect industrial gas valves from ingress of dust and dirt. The yellow LDPE Gas Cylinder Valve Protectors are tamper evident, and feature a unique vent flap which allows safe release of gas following accidental opening of valve

Hexagonal Caps are used to protect all common hydraulic coupling sizes. The design is suitable for protecting round components too and are fitted with a central tab for easy removal. They are suitable for Metric, BSP and UNF sizes. Our Hexagonal Caps range are made from Polyethylene and come in a Natural finish.

The range of Cinch Straps consist of a hook and loop design of straps which hold hoses securely while allowing the hoses to expand or contract as pressure changes. The heavy duty version is reinforced with Ballistic Cordura Nylon and is ultrasonically welded to a one and half inch hook and loop material. All of the hardware on these parts are nickel plated steel

Quick Sleeves eliminate hydraulic line contamination during hose replacement. They are resistant to heat, ozone and abrasion and aid the easy assembly and removal of bundles. Customers that purchase our Hose Protection Sleeves, regularly buy our Spiral Wrap Hose Protectors too.

Mining Safety Approved Hose Protection Sleeves are dense but not bulky for optimum UV and abrasion protection. These sleeves are effective in reducing the concentrated stream of pinhole leaks with a high degree of burst resistance and good leakage containment. Approvals and Certifications: MSHA Approval #MSHA IC0234/0; Meets FED0STD0191 test method 5309 for abrasion resistance; Meets ASTM D6770 for abrasion resistance of textile webbing. Customers who purchase Hose Protection Sleeves - Mining Safety Approved also buy Spiral Wrap Hose Protectors.

Hose Service Plugs are used to avoid costly spills of oils and chemicals during the maintenance and repair of hoses and rigid pipe. The rubber is strong and reusable. No tools required to apply, just push in and twist.

Sleeve Ferrrules are used to securily seal in place the hose protection sleeve on the hose.

Hose Wear Protectors, or Hose Protection Shields, are a type of hose protector that protect hose against point of contact wear with abrasive surfaces.

The 3.9mm wall thickness, as well as the Polyvinyl Chloride (PVC) material, provide durability and excellent wear resistance. The design features moulded grooves to fit cable ties.

These Hose Protectors are commonly used on hydraulic hoses, fuel and oil lines, brake systems, wire harnesses and battery cables.

• Easy to apply and remove
• Colours: Black, Orange and Yellow.

Developed with the LPG industry, LPG Plugs help prevent dangerous gas leaks. Developed with the LPG Industry, the plugs are designed to meet LP Gas Association Code of Practice 15: Part 2. Profiles are strapped to help prevent loss and for ease of replacement and marked with direction of fitting / removal.

Our Non-threaded End Caps are available in wide selection of sizes and are made from Low-Density Polyethylene, in blue. They are ideal for protecting threaded or non-threaded tubing, pipes and rods. Standard, short and long caps are available. The short versions are for general purpose closure and the long versions have an extra depth and feathered edge which ensure a tight fit. The design of these longer caps helps to prevent accidental displacement.

Our Blue Polyethylene O-Ring Face Seal Caps are designed to protect O-Ring Face Seal Connectors used on hydraulic connections. The longer overall length includes a moulded retaining ring at the bottom that snaps under the connector to keep it securely in place during transit and processing. Our range offers a variety of sizes to suit your application.

The range of Plastic Hose Clamps offers a more cost efficient way of securing pipes and hoses. They are made of Nylon 6.6, come in a wide range of sizes and in 3 different colours; grey, white and black

Our Vinyl Pull Tab Caps have a large pull tab allowing easy removal from the component. The PVC or EVA material used for these ranges provide good tensile strength, toughness and increased flexibility. Our range includes colour options; Black, Red and Yellow, with a wide choice of sizes to suit your application needs.