Screw the threaded part and the receptacle together in seconds for a quick, easy and secure binding component. Supplied in sets that include the screw and receptacle. Made from HDPE.
Screw the threaded part and the receptacle together in seconds for a quick, easy and secure binding component. This is the female or receptacle side. The male threaded parts are sold separately.
Our range of Metal Binding Screws, also known as Book Screws, come as male or female parts that are sold separately. Made from steel, with brass, nickel or black finishes and a range of lengths to choose from.
The male and female binder screw parts thread together securely, to create a binding that is just right for panel fastening assemblies, such as for swatch cards, colour charts, catalogues, sample books and many others.
Confirmat Screws are designed specially for edge-to-face fastening of chipboard products, such as kitchen worktops and cabinets, flooring including insulation and underlay, flatpack furnitured, and building insulation.
A Confirmat Screw has a shapr-angled thread that is highly coarse; this allows the screw to easily cut into MDF and chipboard material. The deep cutting thread ensures accurate and close-fitting joints. These hard-wearing screws are an ideal solution for right-angle butt joints, and are an effective choice for easy assembly and dismantling of panels. The screws are tightened and loosened using an Allen Key.
Threaded Rods are ideal for applications where a screw head is not needed, or where space is precious. The Threaded Rod are fastened completely into the material, and threaded right down into the application.
Sometimes referred to as a Plastic Threaded Bar, our Thread Rod range features Fully Threaded Rods and Studs made from Nylon 6/6, including options that have a flame resistance rating of UL94 V2. Nylon is an ideal material for applications where a chemical resistant, insulating, lightweight and non-magnetic solutions is required.
Torx Keys, also known as Hex Key or more commonly as an Allen Key or Allen Wrench, are used to tighten and loosen Socket Head Bolts. Our S Shaped Allen Keys are made from Hardened Steel that has been Zinc-Plated, providing excellent oxidation properties.
Torx Allen Key size options: 4.0mm and 5.0mm.
Inexpensive inserts for use in ready-to-assemble furniture, drawer pulls, etc
Cap screws with a hexagonal shaped head, available in numerous materials and sizes
Plastic Hex Head Bolts and Screws are the ideal fasteners for mechanically securing materials. They are lightweight and resistant to corrosion, oil, abrasion and most chemicals. • Refer to standard ISO 4017, NF EN 24017, DIN 933 for guidance purposes only.
Knurled Thumb Screws, often simply referred to as Thumb Screws or a Knurled Screw, are among the most commonly used screw types and are highly important. This is due to their versatility, as they can be used across a plethora of industrial applications.
These Nylon Thumb Screws can be fastened manually; they are made for applications that need regular modification, because they are easy to install and remove. They can also be installed using a flat head screwdriver. Made from Natural Nylon 6/6, they have a knurled head that features a slotted drive.
As well as M4 Thumb Screw options, our Nylon Thumb Screw range also has M3, M5 and M6 thread size availability.
Fast and easy to push on panel fasteners that screw to tighten further
A disc style head with chamfered outer edge
Cheese head screws are suitable in applications where the head is not seen. These head styles have a cylindrical outer edge. Our customers often browse and buy from our Knurled Thumb Nut range when selecting our Cheese Head Screws.
Countersunk screws are ideal for applications where there can be no protruding head on show
Screws with a flat top that are designed to screw completely into a countersunk hole. Ideal for a range of applications.
These Machine Screws are designed with a low head height for aesthetic and space saving purposes. The low profile head makes them an ideal choice for low-clearance applications. Our offering includes Low Head and Special Low Head options.
A Mushroom Head Machine Screw has a curved head for an aesthetic finish
Slotted, Torx and Crossed (Phillips) style Pan Head Machine Screws that come in standard metric and imperial sizes.
A Pan Head Screw is a great replacement to metal screws. They are lightweight, and offer resistance to vibration, chemical and electrical resistance, and corrosion.
A wide choice of materials are available in our Screw Pan Hd range, including Nylon 6/6, Polycarbonate (PC), Polyether Ether Ketone (PEEK), Polyphenylene Sulfide (PPS), plus metal options in Mild Steel and Stainless Steel.
These round Machine Screws offer extra grip with tightening and loosening, for a range of applications.
These Rod End Mounting Flanges, or Ball Joint Flanges, are screwed from below, and secured against rotation by a Dowel Pin to ball joints GN 784. They are made from stainless steel and offer a rotaion of 120 degrees. Customers may wish to browse our selection of Countersunk Screws, which are used to fasten the joint.