Locking Push Fit Hook and Loop Cable Ties

Heat Shrink End Caps are used to seal, insulate and protect threaded and unthreaded pipes, tubes, and rods. Features a thick adhesive inner liner wall. It shrinks when heated and is able to operate at temperatures between -55C and +110C.

• Ideal for sealing or insulating and protecting pipes, tubes, and rods.

• Used to protect from damage, dirt or moisture.

• It can operate at temperatures between -55C and +110C.

Material: PO Colour: Black Series Code: SR1180

Heavy Duty Pipe Caps protect the end of pipes from dust, debris and contaminants. Features a reinforced design foundation. Can resist temperatures ranging from 66C up to -40C.

• Used to protect the end of a pipe from dust, dirt, and other impurities.

• Used in plumbing, heating, ventilation and industrial applications.

• Resistance to temperatures of 66C to -40C.

Material: LDPE, PE Colour: Yellow, Black Series Code: SR1389

Hexagonal caps are intended to cover hex-shaped fittings, bolts and nuts. Available in all conventional hydraulic coupling sizes. Due to the their adaptability, these caps can also be used to protect spherical components.

• Hexagonal Caps have a rigid design that allows for easy fitting and removal. Available in all common hydraulic coupling sizes.

• Also suitable for the protection of round components.

• Flexible and economical.

Material: LDPE Colour: Natural Series Code: SR1127

Body Plugs are great for closing panel cavities and firmly sealing apertures or holes. They are particularly useful for sealing openings with sharp edges.

Acts as a protective barrier that helps to prevent potential harm and compromise to the integrity of the enclosed space.

Provides a tight and secure fit thanks to a push fit design. Used in various applications, including automotive, industrial equipment, and machinery.

• Can tolerate temperatures ranging from -40C up to 135C.

• Prevents ingress of dust, dirt, moisture, and other contaminants.

• Provides a clean finish.

Material: TPE, TPR Colour: Black Series Code: SR1765

High-temperature flanged caps shield openings from contaminants and damage in extreme heat conditions. These caps are built to withstand high temperatures, while maintaining their structural integrity, and sealing properties.

A flanged design extends beyond the edge of the component, providing additional coverage. Provides a secure grip for easy application and removal, even in challenging conditions.

Used in the automotive and manufacturing industries, as well as applications requiring metal finishing.

• Designed to protect threaded or non-threaded ends of pipes, tubes, and fittings. Typically used to for metric or imperial threads, both with and without O-rings.

• Simple installation and removal, either with automated equipment or by hand.

• Designed to withstand high temperatures.

Material: Silicone Colour: Yellow, Grey, Clear, Pink Series Code: SR5754

Stud Protection Caps protect threaded studs and bolts against damage, contamination, and corrosion. These caps are designed to resist severe temperatures without losing structural integrity or sealing characteristics.

The studded construction protects against injuries from protruding threaded rods.

Used in the automotive and manufacturing industries, as well as in applications that need metal polishing.

• Provides general protection during manufacture, storage, and transportation even in severe temperatures.

• Simple installation and removal, either with automated equipment or by hand.

• Ensures a snug fit.

Material: TPR Colour: Black Series Code: SR1026

This range of high temperature masking plugs features Silicone Rubber Tapered Plugs, EPDM Tapered Plugs and other Tapered Rubber Plugs made from Thermoplastic Rubber (TPR).

This extensive range of Tapered Plugs is available as a solid plug or with a hollow core, to aid in compression. Solid and hollow core options are available in our EPDM and High Temperature Silicone Plugs ranges. The hollow centre provides a cost-effective solution for larger sizes. The hollow design is more flexible than solid plugs, and allows for easier application.

Our Tapered Rubber Plug range features Univesal Plugs made from TPR. The tapered plug is designed to mask holes without masking the surrounding areas, and a pull tab allows for easy installation and removal. Suitable for temperatures up to 125C.

• Colours: Black, Blue, Green, Natural, Pink, Red and Yellow
• Simple push-fit design

Hinged Wire Saddles provide a quick and easy solution for gathering and directing cables and wires, and holding them neatly in place.

The hinged top locking entry system ensures cables are retained and clear of sensitive components. The cables can be easily removed, when required. The wire saddle can be easily fitted and removed with finger-tip pressure.

The material that these wire saddles is made from provides good temperature stability, as well as strength and mechanical resistance.

• Material: Polyamide 6/6 (PA or Nylon 6/6)
• Colour: Natural
• UL94 V0 and UL94 V2 flame rated options
• Temperature Range: -40C up to 85C

These Hook and Loop - Cable Ties are ideal for cable organisation since they must be securely held together, released, and resealed regularly. The hook and loop strap adjusts quickly and easily, ensuring a precise fit around bundles of cables without the risk of over-tightening or damaging the cables themselves, making it excellent for fragile cables.

The hook and loop strap wraps easily over the cables, and the firm grip offers a secure hold without the need for additional fasteners or adhesives. Commonly used in applications for industrial, automotive and commercial.

• Colour: Black, Yellow, Red, Grey, Green, Blue, Orange, White

Series Code :SR2001

Horizontal Inserts fit the ends of Rectangular tubes and are ideal for attaching levelling feet or castors. Four types are available, each with different joining configurations. Type 1 has one level and two directions, Type 2 includes one level, two directions and a top thread, Type 3 has one level, two directions and a bottom thread, and Type 4 features one level, two directions and two threads.

• Tube Inserts are available with different features. Inserted to the end of tubes; they are ideal for the attachment of levelling feet or castors.

• Designed to insert into rectangular tubes, and provide a neat and tidy finish.

• Four joining configurations to choose from.

Material: Nylon Colour: Black Series Code: SR1421

Hose Washer Caps are applied to the ends of hoses and tubes to keep them from slipping over the fittings. Protects against water, dust, grime and pollutants.

• It prevents water and dirt leaks.

• It is easy to install and remove.

• Used in construction applications, gardening and automotive industry.

Material: TPE, LDPE Colour: Black, Yellow Series Code: SR5758

LGP Caps have been developed in collaboration with the LPG sector to assist in avoiding harmful gas leaks. Provides a tight seal for cylinders, valves and fittings, even in harsh environments. Prevents pollutants from entering the applications. Marked with assembly and disassembly directions.

• Its design incorporates a strap to help prevent loss and ease of replacement.

• It prevents debris and contaminants from entering the application.

• It is used in warehousing, construction, and automotive industry.

Material: HDPE;LDPE, HDPE Colour: Black Series Code: SR1085

Locking Wire Saddles provide a quick and easy solution for gathering and directing cables and wires, and holding them neatly in place.

The top locking entry system ensures cables are retained and clear of sensitive components. The cables can be easily removed, when required. The wire saddle can be easily fitted and removed with finger-tip pressure.

The material that these wire saddles is made from provides good temperature stability, as well as strength and mechanical resistance.

• Material: Polyamide 6/6 (PA or Nylon 6/6)
• Colour: Natural
• UL94 V0 and UL94 V2 flame rated options
• Temperature Range: -40C up to 85C

Masking Cones can be used as plugs or caps. The tapered form allows them to fit a variety of inner and outer diameters. Can be secured with paint hooks. Available in Silicone and EPDM.

• Versatile masking solution that can be used as a cap or plug.

• Tapered design.

• Premium and economical material options.

Material: Silicone, EPDM Colour: Purple, Red, Natural, Rust, Black, Blue, Green, Brown, Yellow Series Code: SR1075, SR1091

Masking Flangeless Plugs are designed to cover holes without masking the surrounding area, protecting against contaminants. Featuring conical rings and a hollow core, these plugs can mask multiple areas at once.

• Used to cover holes without masking the surrounding area.

• The pull tab makes them simple to install and remove, allowing for smooth insertion and a snug fit that eliminates unwanted leaks or seepage.

• Used in multiple applications, such as powder coating, painting, plating, and sealing.

Material: EPDM, Silicone, TPE, PVC Colour: Black, Natural, Blue, Green, Purple, Orange, Yellow, Pink, Red Series Code: SR1090, SR1093, SR5748, SR1034

Masking pull plugs are used to mask threaded and non-threaded holes, offering resistance to chemicals. The pull tab makes them easy to install and remove, ensuring a secure fit that prevents leaks or seepage. The reusable material allows for multiple uses, reducing the need for frequent replacements and helping minimize waste. Cn withstand temperatures of up to 250C.

• Used to mask threaded and non-threaded holes.

• The pull tab simplifies installation and removal, allowing for smooth insertion and a secure fit.

• Used in powder coating, sealing, automotive assembly, and electronics production.

Material: EPDM, Silicone, Silicone Rubber Colour: Black, Clear, Natural, Red, Grey, White, Purple, Green, Pink, Orange, Yellow, Blue Series Code: SR1094, SR1057, SR6118, SR6117, SRF0060, SR5750, SR5749, SR5752, SR1028

Masking Star Tubes have a star-shaped form that is suitable for lengthy studs and pins. The flexibility makes it easy to insert and remove. Fits over threaded studs, non-threaded tubes and other irregular forms.

• A masking solution that is ideal for long studs and pins, where caps are too short.

• Flexible and fits easily on to tight diameters.

• Fits over threaded studs, non-threaded tubes or irregular shapes.

Material: Silicone Colour: Green, Blue, White, Yellow, Red Series Code: SR1051

Masking Straight Caps are excellent for protecting and masking pieces through various masking techniques. Designed to protect studs, pins, tube ends, and other applications that need threaded or non-threaded holes. Available in Silicone and EPDM.

• Ideal solution for protecting and masking parts undergoing a variety of masking processes.

• Can also be used as a plug to mask threaded or non-threaded holes.

• Used to protect studs, pins and tube ends.

Material: Silicone, EPDM Colour: Natural, Black, Yellow, Pink, Green, Blue, Orange, Grey Series Code: , SR1052, SR1095

Masking Straight Tubing is meant to cover long studs and pins with short caps. Can be trimmed to the desired size and masked off with a through-hole by drawing the tubes outside diameter through. Supplied in rolls for enhanced convenience.

• An excellent masking solution to fit over longer parts, where standard caps are too short.

• Supplied on a roll and can be cut to required length.

• Conforms to irregularities and is reusable.

Material: Silicone Colour: Red, Natural Series Code: SRF0064, SR1088, SRF0065

Masking Washer Caps are intended as caps with an additional washer to hide grounding or plug holes, when inverted. Protects against solvents, abrasives, and suitable for temperatures of up to +250ºC.

• Masking Washer Caps that can be applied as a protective cap for threaded and non-threaded end tip.

• Integrated washer masks of grounding and also provides edge protection.

• Can also be inverted and used to plug holes.

Material: Silicone Colour: Grey, Natural, Purple, Yellow, Black, Red, Pink, Green Series Code: SR5756

High temperature Washer Plugs are designed to mask the surface around a threaded or plain hole, with an integrated washer and plug that function as a single item. Easy to install and remove; they ensure a snug fit and secure seal to prevent leakage or contamination. Capable of withstanding temperatures of up to 250C.

• It has an integrated washer and plug that allows them to function as a single item.

• Can withstand high temperatures of up to 250 degrees Celsius.

• Used for powder coating, painting, plating, sealing, automotive assembly, and electronics manufacturing.

Material: Silicone, EPDM Colour: Natural, Black, White, Grey, Dark Green, Yellow, Pink, Purple, Red Series Code: SR1065, SR1092, SR5753

Mini Wire Saddles are primarily used to gather and route cables for electronic applications. The wire saddle keeps components tidy and removes clutter. They also help ensure cables are easy to access for further assembly or repair.

Our range features wire saddles with locking and non-locking tops, options with an adhesive base, as well as side entry , blind hole and stand-off wire saddles. Mounting options include push-in and screw-on.

The reduced size of these wire saddles makes these useful for applications where space is limited.

• Material: Polyamide 6/6 (PA)
• Colour: Natural
• UL94 V0 and UL94 V2 Flame Rated options

Series Code :SR2104

NPT Thread Plugs are used to seal and protect the ends of BSP and NPT threaded pipes and fittings. The robust design ensures they can withstand high pressure, temperature and damage during storage and shipment. The tapered form allows for a tight, leak-free fit across various inner diameters.

• Used to seal and protect the ends of BSP/NPT threaded pipes and fittings.

• Their robust design allows them to withstand high pressure, temperature, corrosion, dirt, and damage during storage and shipment.

• Used in plumbing pipes, HVAC, automotive, and industrial applications.

Material: LDPE Colour: Blue Series Code: SR1114

Non-slip rubber pads are ideal to cover the levelers on machines or conveyors. These pads can bear heavy loads and provide extra friction to prevent movement and slipping.

Non-Threaded End Caps are ideal to securely protect non-threaded or threaded tubing, pipe or rods. Keeps out dirt, debris, and other contaminants. Has some abrasion resistance, which keeps the mating part safe during storage and shipping. Can also be used for masks in painting, plating or sand blasting applications.

Quick and easy to install and remove.

Can be used for plumbing, HVAC, and industrial applications.

• Securely protects threaded or non-threaded tubing, pipes, and rods.

• Quick and easy to install and remove.

• Used for plumbing, HVAC, and industrial applications.

Material: LDPE, PE, PP Colour: Black, Blue, Yellow, Grey, Natural Series Code: SR1062, , SRF0023