End Caps

We found 69 product types for Push Fit End Caps

Need a Quote?

For large volumes and customised products, add to your cart and click request a quote, or email sales@essentracomponents.co.uk and we will respond within 1 working day

Filter Products

  • of 3
List Grid

Tube End Caps

In stock In production

Standard Round End Caps are non-threaded and available in a wide range of sizes. They are ideal for protecting threaded or non-threaded tubing, pipes and rods. Standard, short and long caps are available. The short versions are for general purpose closure and the long versions have an extra depth and feathered edge which ensure a tight fit. The design of these longer caps helps to prevent accidental displacement. All are available in a wide range of sizes

{0} variants (Filters applied) {0} variants (No filters applied)

Standard Round End Caps

In stock In production

Standard Round End Caps are non-threaded and available in a wide range of sizes. They are ideal for protecting threaded or non-threaded tubing, pipes and rods. Standard, short and long caps are available. The short versions are for general purpose closure and the long versions have an extra depth and feathered edge which ensure a tight fit. The design of these longer caps helps to prevent accidental displacement. All are available in a wide range of sizes

{0} variants (Filters applied) {0} variants (No filters applied)

Ribbed Pipe End Caps

In stock In production

Standard Round End Caps are non-threaded and available in a wide range of sizes. They are ideal for protecting threaded or non-threaded tubing, pipes and rods. Standard, short and long caps are available. The short versions are for general purpose closure and the long versions have an extra depth and feathered edge which ensure a tight fit. The design of these longer caps helps to prevent accidental displacement. All are available in a wide range of sizes

{0} variants (Filters applied) {0} variants (No filters applied)

Heavy Duty Pipe Caps

In stock In production

Caps for Heavy duty pipe sizes are available as a low cost and high quality option. They are made from yellow LDPE and the internal ribs ensure a tight fit and release after pressure build up. Standard nominal pipe sizes are available and these caps come either with or without a vent hole

{0} variants (Filters applied) {0} variants (No filters applied)

Non-Threaded End Caps

In stock In production

Standard Round End Caps are non-threaded and available in a wide range of sizes. They are ideal for protecting threaded or non-threaded tubing, pipes and rods. Standard, short and long caps are available. The short versions are for general purpose closure and the long versions have an extra depth and feathered edge which ensure a tight fit. The design of these longer caps helps to prevent accidental displacement. All are available in a wide range of sizes

{0} variants (Filters applied) {0} variants (No filters applied)

Round Hanger Caps

In stock In production

Round Hanger Caps are an attractive cap with a convenient hanger. They are flexible for easy fitting and offer good weather resistance

{0} variants (Filters applied) {0} variants (No filters applied)

Square End Caps - Heavy Duty

In stock In production

Square End Caps includes a range of sizes which are ideal and popular for square tubes. The Square Gloss Caps are an ideal finishing product for tubular products a and are flexible and easy to fit whilst giving an attractive gloss finish

{0} variants (Filters applied) {0} variants (No filters applied)

Oval Feet Ferrules

In stock In production

Oval Feet Ferrules provide a neat cover to oval-shaped tubes. They can be used for finishing, protection and essentially to cover sharp tube edge. The PVC material offer flexibility and is easy to fit.

{0} variants (Filters applied) {0} variants (No filters applied)

Round Feet Ferrules - Standard

In stock In production

The Round Feet Ferrules provide a neat cover to round-shaped tubes. They can be used for finishing, protection and essentially to cover sharp tube edge. The PVC material offer flexibility and is easy to fit.

{0} variants (Filters applied) {0} variants (No filters applied)

Round Feet Ferrules - Tapered

In stock In production

Round Feet Ferrules - Tapered are ideal as protective cap for protruding wire, steel rods or bars. They give a neat finish to tubular products and are flexible for easy fitting.

{0} variants (Filters applied) {0} variants (No filters applied)

Square Feet Ferrules

In stock In production

The Square Feet Ferrules provide a neat cover to square-shaped tubes. They can be used for finishing, protection and essentially to cover sharp tube edge. The PVC material offer flexibility and is easy to fit.

{0} variants (Filters applied) {0} variants (No filters applied)

Gas Cylinder Valve Caps

In stock In production

Gas Cylinder Valve Caps are developed in conjunction with major European gas companies. They protect industrial gas valves from ingress of dust and dirt. They are tamper evident. There is variation in the design with a vent flat to allow safe release of gas.

{0} variants (Filters applied) {0} variants (No filters applied)

LPG Gas Caps

In stock In production

LPG caps are developed with the LPG industry to help prevent dangerous gas leaks. They meet LP Gas Association Code of Practice 15: Part 2. The part design incorporate a strap to help prevent loss and for ease of replacement. Test Pressure: Propane/mixes (type 1 & 2) 26 bar. Butane (type 3) 26 bar. Independently tested to withstand these pressures, while providing gas-tight seal, even under extreme temperatures and adverse conditions (test results and certificate available on request). Materials:Type 1: Plug: HDPE, Strap: LDPE Type 2: Cap: HDPE Type 3: Cap: HDPE, Strap: LDPE

{0} variants (Filters applied) {0} variants (No filters applied)

Hose Washer Caps

In stock In production

Hose Washer Caps are applied on hose and tube ends in order to prevent them from sliding over the fittings.

{0} variants (Filters applied) {0} variants (No filters applied)

Nut Protection Caps

In stock In production

Nut Protection Caps are available in a large range of sizes in LDPE. The protective caps have excellent chemical and environmental resistance to guard exposed nuts and bolts. Ideal for protecting fasteners and creating a neat finished appearance in outdoor applications where durability is required.

{0} variants (Filters applied) {0} variants (No filters applied)

Secure Cover Caps

In stock In production

Secure Cover Caps snaps securely into place to protect and conceal the bolt head or nut on point of sale products, furniture, and outdoor equipment. Secure Cover Caps and bases can be mixed and matched in six different colors to create a customized appearance.

{0} variants (Filters applied) {0} variants (No filters applied)

Snap-on Nut Caps

In stock In production

Snap-on Nut Caps are a cost effective option to cover exposed nuts and bolts to improve the finished appearance.

{0} variants (Filters applied) {0} variants (No filters applied)

Finned Stud Caps

In stock In production

Finned Stud Caps are used to protect a wide range of studs. The internal fins provide a strong hold and are flexile to be suitable to various diameter with the use of one part. The range come with grip to ease the removal of the part and without grip.

{0} variants (Filters applied) {0} variants (No filters applied)

Flanged Caps

In stock In production

Flanged Caps are designed to protect the thread of studs. They are used throughout the automotive and engineering industries for general protection. The flanges on the profiles have different sizes allowing socket wrench to function without removing the protection.

{0} variants (Filters applied) {0} variants (No filters applied)

Pull Tab Caps

In stock In production

Pull Tab Caps have a large pull tab allowing easy removal from the component. The PVC or EVA material used for these ranges provide good tensile strength, toughness and increased flexibility.

{0} variants (Filters applied) {0} variants (No filters applied)

Tear Tab Caps

In stock In production

Tear Tab Caps are easy and rapid solution to remove the cap from the part. By png the tab, the cap split wide open offering an easy solution to numerous applications. The range is suitable to UNF and NPT threads.

{0} variants (Filters applied) {0} variants (No filters applied)

Scaffolding End Caps

In stock In production

Standard End Caps are ideal for using on the end of scaffolding poles due to their bright colours which allow for high visibility. They are available in yellow, orange, blue and green

{0} variants (Filters applied) {0} variants (No filters applied)

Pozidrive Screw Caps

In stock In production

Cover caps, available in nylon or HDPE, are suitable for decorative and protective purposes. Our Cover Caps are offered in four styles and in black, grey or white.

{0} variants (Filters applied) {0} variants (No filters applied)

Allen Screw Caps

In stock In production

Conceal and protect exposed Allen Screws

{0} variants (Filters applied) {0} variants (No filters applied)

Cover Caps

In stock In production

Cover caps, available in nylon or HDPE, are suitable for decorative and protective purposes. Our Cover Caps are offered in four styles and in black, grey or white.

{0} variants (Filters applied) {0} variants (No filters applied)
  • of 3