(7 product groups)
Stand-off Cable Clamps with side entry keep cables held securely in place. The feature a cupped base that adds stability, as well as covering the hole completely.
Cables are inserted through the side of the clamp in applications where space is an issue. Different spacer heights lift cables away from other components.
Dual cable and pipe clip offers the benefit of routing a 25.0 mm tube or pipe, as well as two smaller 6.0 mm bundles separately.
It is used to fasten cables and pipe on a panel with a barbed bush.
These cable clamps have a hinged locking top. The cable(s) are placed in the center of the clamp first, then the hinged top is placed over the cables. The legs of the clamps are placed into two holes. The top is secured in place, holding the cable with the help of two screws. As the screws are engaged, the legs expand holding the clamp in place without the need of a nut. This means there is no need to access the bottom side of the board.
Securely holds corrugated/convoluted tubing or other bundles. An internal rib spanning the diameter of the clamp provides a tight grip. Releasable latch for convenient maintenance. Fir-tree mount accommodates a large range of panel thicknesses
Adjustable Clips are push mounting into a panel and then the adjustable clip is versatile to accept an array of cable sizes.
Standoff Cable Clips provide a secure yet simple fastening and are an ideal cable management solution for a variety of applications. The push in base adds to the ease of installation and the locking clip adds a level of security.
Webbing Centre Clips are either snap lock or self-adhesive mounted and the two sides of the clip combine to clamp the cable in place. Available in both black and natural. The adhesive element of the product has a shelf life of approximately 1 Year from date of shipping; when stored in the unopened original packaging, stored at room temperature and away from sunlight.