Locking Cable Clamps

Adhesive Mount Adjustable Cable Clamps have a ratcheting feature to hold and lock bundles securely. These clamps can be reopened for routing changes. Easily installed with the adhesive base.

Easily mounted with adhesive. No through hole is required. Locking device holds cable in place and can be re-opened as well. Different styles, colours and material available.

Quickly and easily mounted with an adhesive base. Top of the clamps are pressed under the lid to lock cables into place. Two different sizes for various bundle diameters. Grey UL94 V-0 rated PVC with an acrylic adhesive.

Securely holds corrugated/convoluted tubing or other bundles. An internal rib spanning the diameter of the clamp provides a tight grip. Releasable latch for convenient maintenance. Fir-tree mount accommodates a large range of panel thicknesses

These cable clamps have a hinged locking top. The cable(s) are placed in the center of the clamp first, then the hinged top is placed over the cables. The legs of the clamps are placed into two holes. The top is secured in place, holding the cable with the help of two screws. As the screws are engaged, the legs expand holding the clamp in place without the need of a nut. This means there is no need to access the bottom side of the board.

Ratcheting clip grips the bundle securely. Adjustable for a wide range of bundle diameters. While locking the bundle in, it will reopen for routing changes. Good for high vibration applications. Once the clip is closed it will not open until the tab is released. Available in either UL94 V-2 or UL94 V-0 material

Can be opened and closed multiple times for adding or removing cables. Large contoured base that assures stable mounting. Nylon 6/6