Fir Tree Cable Clamps
(5 product groups)
Cable Clamps - Dual Cable & Pipe Clips
These cable clamps offer the benefit of routing a 25.0 mm tube / pipe as well as two smaller 6.0 mm bundles separately. Available in two sizes for different hole diameters.
Cable Clamps - Fir Tree Mount, Hinged Locking Top
Securely holds corrugated/convoluted tubing or other bundles. An internal rib spanning the diameter of the clamp provides a tight grip. Releasable latch for convenient maintenance. Fir-tree mount accommodates a large range of panel thicknesses
Cable Clamps - Fir Tree Mount, Wire Harness
This Cable Clamp has a fir tree mount and is easily pushed into a mounting hole using a standard 6mm hexagonal socket driven onto the mounting head. The clamp is releasable and reusable for easy troubleshooting.
Cable Clamps - Standoff, Side Entry
These Cable holders are available in two mounting methods; fir-tree mount and arrowhead mount. They are also available with various spacer lengths to hold the cables off of the board. They have a cupped base that adds stability as well as covering the hole completely. The cables are inserted through the side of the clamp in applications where space is an issue.
Snap-in U Clamps
Low profile cable clamps for use on densely packed boards or other limited space applications. Good for mounting bundles in corners or along edges.