Push-In Rivets Rivets
(18 product groups)
These expansion rivets can be set 'blind' without the need for access to the back of the panel. Set by pulling the mandrel head into the rivet body, expanding the rivet body and causing it to flare against the reverse side. When sufficient force is applied, the mandrel will snap at its break point. Installed with a pop rivet installation tool (not currently offered by Essentra). Particularly good for soft materials.
Push-In Rivets - Arrow Clip
Arrow Clips easily push into holes to fasten thin gauge material or light-weight components. Designed in either natural or black, they provide a light-weight and corrosion-resistant solution.
Push-In Rivets - Bevelled Head
Flat, beveled head eases assembly and disassembly. Easily pushed in by hand. As the pin is inserted into the grommet, the legs expand, locking it in place.
Push-In Rivets - Countersunk
Countersunk design for flush surface. Tamper-resistant design. Accommodates countersunk hole specification DIN ISO 7721. Available in black or white. Easily installed by hand.
Push-In Rivets - Double-ended Fir Tree
Allows two panels to be connected from the center so that no fastener head is visible. More durable than adhesive.
Push-In Rivets - Drive Fasteners
These drive fasteners are a multi-purpose, front-loaded fastener. They have a hollow body which increases their flexibility for ease of insertion and removal. Can be used as a decorative hole plug. Easily inserted by hand. Available in both UL94 V-2 and UL94 V-0 rated materials.
Push-In Rivets - Folding Leg
Pushing the pin into the rivet body causes the legs to expand and grip the material. The legs fold out to .73 inches wide. Once installed, the rivet cannot be removed from the outside of the box. Good for use with cardboard or other porous material. Available in black and natural colors.
Push-In Rivets - Heat Sink
Fasten a heat sink to a processor chip on a PCB. They have an integrated spring that provides continuous pressure to the heat sink until the thermal adhesive cures. The HSR-2 has a cross molded in allowing it to be installed by using a Phillips head screwdriver.
Push-In Rivets - Key Hole Clip
These fasteners have a uniquely-shaped key-hole interior that allows the part to collapse more completely for easy assembly with finger pressure. The part's tapered point helps guide it into the panel. Available for a range of hole diameters and panel thicknesses.
Push-In Rivets - Knob Head
With a knob head, these rivets snap in and out of a hole with ease. Ideal for applications that require quick assembly and disassembly.
Push-In Rivets - Mounting Button
These Mounting Buttons push-in, creating a tight locking solution that mates two objects together. The mounting arrowhead and the winged head locks it securely in place. They can only be removed from the underside of the board.
Push-In Rivets - Plastic, Push, Round/Square Hole
Pre-Installed pin for easy finger pressure installation. Can be mounted in a Round or Square hole. Use square hole mounting for anti-rotaion applications. UL94 V-2 rated Nylon.
Push-In Rivets - Push-In Fasteners
These Push-in Fasteners provide an inexpensive, easy solution to join materials together where the overall thickness is up to 1.51 inches. The legs provide compression and expansion to lock the rivet into a pre-punched hole and are offered in a large range of sizes. They may also be used as a hole plug or as simple push-in bumper.
Push-In Rivets - Removable
Easily snapped in by hand. Removable by pulling on the side taps of the pin. Allow blind side fastening. Pin and Grommet are provided separately. Can be used in a round or square hole. A square hole prevents rotation.
Push-In Rivets - Snap
Our most popular and easiest to install plastic rivets! Simply push the head in and the grommet expands to hold it in place. Removable by pulling head. Available in both black and white colors. UL94 V-2 or UL94 V-0 material and also in Heat Stabilized material.
Push-In Rivets - Snap-In Flush Top
Available in 14 sizes. Quickly installed by hand. Grommet expands as pin is inserted providing a tight fit. Suited for any application requiring a front-mount rivet.
Push-In Rivets - Snap-Lock Pins
Commonly used to fix connectors to printed circuit boards. Easily installed by hand. Four different styles in a UL94 V-2 rated Nylon 6/6.
Push-In Rivets - Tough Rivet
These rivets are molded and designed to be stronger than standard snap rivets. They are supplied in a one-piece design with a pre-driven pin. They are removable by pulling out the pin.