End Caps

Standard Round End Caps are non-threaded and available in a wide range of sizes. They are ideal for protecting threaded or non-threaded tubing, pipes and rods. Standard, short and long caps are available. The short versions are for general purpose closure and the long versions have an extra depth and feathered edge which ensure a tight fit. The design of these longer caps helps to prevent accidental displacement. All are available in a wide range of sizes.

Threaded Protection Caps are used throughout the automotive, fluid power and engineering industries. They protect threaded components from dust, moisture and damage. The range is suitable for Metric threads.

Metric Threaded Sealing Caps are fitted with an internal neoprene rubber sealing disk to limit contamination from deposit and entry of particules. They are suitable to protect metric threads. While hand tightening is recommended, the cap can be applied or removed by wrench or socket at a low torque.

Pull-Tab Caps have a large pull-tab allowing easy removal from the component. The PVC or EVA material used for these ranges provide good tensile strength, toughness and increased flexibility.

Decorative Screw Covers are used to cover screw holes. They have an adhesive backing and match a large array of furniture finish colors.

Hose Washer Caps are applied on hose and tube ends in order to prevent them from sliding over the fittings.

Standard Tapered Caps & Plugs are designed for each part to cap multiple O.D.’s or plug multiple I.D.’s. The durable material protects against damage, dirt, moisture and corrosion during storage and shipping.

Flexible High Temp End caps PVC material is flexible and good up to a temperature of 425F. This economical part has excellent chemical resistance and can be used in Powder Coating, E-Coating, Plating and general paint line applications.

Masking Straight Tubing is ideal to mask long profiles but also provide flexibility to customize length requirement.

Square End Caps - Vinyl protect pipe bevels and internal walls from corrosion and damage. These heavy-duty caps accept crane hooks for moving pipe and are available with or without a vent hole.

The Round Ferrules provide a neat cover to round-shaped tubes. They can be used for finishing, protection and essentially to cover sharp tube edge. The PVC material offer flexibility and is easy to fit.

Flanged Caps are designed to protect the thread of studs. They are used throughout the automotive and engineering industries for general protection. The flanges on the profiles have different sizes allowing socket wrench to function without removing the protection.

Cross-Head Screw Caps conceal and protect exposed Phillips head screws.

Grease Nipple Caps are a low-cost effective solution to protect grease nipples from ingress of dirt when not engage with its mating part. The cap is knurled to assure an easy grip and is fitted with a retaining washer to stay in place

The large flange on this series of Tapered Caps/Plugs provides greater protection and easy removal. Designed for use as both a cap and a plug, Large Flange Tapered Caps/Plugs provide excellent protection from damage, dirt, moisture and corrosion during storage and transportation.

Packaging Tube Caps are used in the sheet metal industry as a protection against sharp edges and are ideal for closing panel cavities. They provide a clean finish and a quick solution. They come in a large offering to suit hole diameter and panel thickness.

Masking Straight caps fit over studs, pins or tube ends to provide an excellent masking solution. They can also be used to plug holes if inverted. These reusable caps come in a premium high temp silicone material or in a economical reduced temp EPDM material. Applications include Powder Coating, E-Coating, Plating and Anodizing. Multiple colors are available for color coding applications.

Stretch Fit Cover Caps act as masking bags designed to mask awkward shapes. They have an elasticated bottom to hold a bag onto an application. Their softening point is at 90 degrees Celsius and they can be used up to 100 degrees Celsius.

LDPE O-Ring Face Seal Caps are designed to protect O-Ring face seal connectors used on hydraulic connections. The longer overall length includes a molded retaining ring at the bottom that snaps under the connector to keep it securely in place during transit and processing.

Push-fit Vinyl Round End Caps can stretch onto larger dimensions for a snug fit without tearing, splitting, or shredding. The glossy and attractive finish makes this cap ideal for use as a decorative end cap.

Threaded Protection Caps are used throughout the automotive, fluid power and engineering industries. They protect threaded components from dust, moisture and damage. The range is suitable for BSP/Gas threads.

Tear-Tab Caps are easy and rapid solution to remove the cap from the part. By pulling the tab, the cap split wide open offering an easy solution to numerous applications. The range is suitable to UNF and NPT threads.

Bolt Head and Nut caps come in two styles and are supplied in a wide range of sizes. They protect against weathering and tampering while enhancing appearance.

LDPE Heavy-Duty Tapered Caps & Plugs include a rugged wall and seal rings for maximum protection. The tapered profile allows the versatile part to plug multiple I.D.’s or cap multiple O.D.’s

Driveshaft Protection Caps are used for the protection and masking of driveshaft as well as the surrounding bearings. They fit drive shafts to DIN748, IEC 600-72 and ISO R775. The range comes in two materials LDPE and Flexible PVC providing resistance to tearing, splitting, oil and most chemicals.