Grommet Nuts are used for a secure threaded connection between two panels and are often purchased alongside our U-Nut Grommets
Cross Dowel Barrel Nuts
Cross Dowel Barrel Nuts are designed to be used with Joint Connector Bolts where a right angle connection is needed. The M6 nuts are supplied in a zinc alloy material for a cost-effective solution whereas the M8 nuts are supplied in steel for additional strength. The M8 nuts are therefore ideal where heavier applications are required - typically on boards of a 22mm thickness upwards. Customers also regularly buy our Joint Connector Bolts - browse our range here.
Flange Hex Nut - Plastic
Flange Nut is a hex nut with a flange on the base, acting as an integrated washer. This spreads the load and prevents damage to the part, while also reducing the risk of the nut loosening in application. Customers regularly by flange hex nuts with our External Toothed Lock Washers.
Joint Connector Nuts
Joint Connector Nuts are designed to be used with Joint Connector bolts. The head size of the bolt and nut match, thus providing an excellent surface finish on both sides of the assembly. They are easily applied with an Allen key
Standard Hex Nuts - Plastic
A six-sided fastener with an internally threaded hole, usually used in conjunction with a bolt or screw. Can be fastened in place with tools such as spanners or ratchets.Our Plastic Hex Nuts are regularly purchased with Retaining Washers – browse our range here.
Furniture Mount T-Nuts
Furniture Mount T-Nuts are ideal for use with Essentra's range of adjustable feet, tilt glides castors and locking bolts. They are easy to assemble, simply insert into a pre-drilled hole and tap into place with a hammer. They are self-locking to prevent rotation during hand or automatic assembly
Lock & Flange Nuts - Metal
A Flange Nut is a hex nut with a flange on the base, acting as an integrated washer. This spreads the load and prevents damage to the part, while also reducing the risk of the nut loosening in application.
Standard Hex Nuts - Metal
Standard Hex nuts are one of the most common nuts available. Used with anchors, bolts, screws, studs, threaded rods and on any other fastener that has machine screw threads. They are often purchased with Single Wave Spring Washers by our customers.
Wing & Fly Nuts - Metal Wing Nuts
Wing nuts have thumb tabs that provide extra grip to allow easy, quick and tool-less installation and removal. Fly nuts are available in standard metric thread and Zinc plated mild steel.
Cage Nuts are applied to square holes, commonly found on mounting rails of equipment racks. The combination of a square hole and cage nut is used within rack systems as this allows for a choice of nut and bolt sizes; if threads are damaged the nut can be easily replaced because the sheet metal is too thin to tap or thread. Our range is made from Steel and are available in several sizes to suit your application.