Menu Search

Plastic End Caps

 (10 product groups)

Need a Quote?

For large volumes and customized products, add to your cart and click request a quote, or email sales@essentracomponents.com and we will respond within 2 working days.

Filter Products

List Grid

Hose Washer Caps

In stock In production

Hose Washer Caps are applied on hose and tube ends in order to prevent them from sliding over the fittings.

{0} variants (Filters applied) {0} variants (No filters applied)

Stretch Fit Cover Caps

In stock In production

Stretch Fit Cover caps are designed to mask awkward shapes and protect against dirt and moisture during storage and shipping. They have an elasticated bottom to hold it onto the mating part. This can also be used as a general paint mask in ambient temperature environments.

{0} variants (Filters applied) {0} variants (No filters applied)

Driveshaft Protection Caps

In stock In production

Driveshaft Protection caps are used to protect and mask the driveshaft and the bearings surrounding it. They fit DIN748, IEC 600-72, and ISO R775 drive shafts.

{0} variants (Filters applied) {0} variants (No filters applied)

Tapered Caps & Plugs - Standard

In stock In production

Tapered Caps and Plugs made from Red and Blue Low Density Polyethylene (LDPE). A versatile assembly that can be used as both a tapered cap or a tapered plug.

The tapered design allows the part to plug multiple inner diameters or cap multiple outside diameters. The Tapered Cap Plug protects the assembly against damage, dirt, moisture and corrosion during storage and shipping. The series has parts with a heavy duty design, which includes a rugged wall and seal rings for maximum protection.

To assure a proper fit;

  • The tapered plugs outer diameter should be approximately 1% larger than the inner diameter of the part (minimum of 0.020 inch).
  • The tapered caps inner diameter should be approximately 1% smaller than the outside diameter of the part (minimum of 0.020 inch).

{0} variants (Filters applied) {0} variants (No filters applied)

Tapered Caps & Plugs - Wide Flange

In stock In production

The Wide Flange tapered cap & plug design gives this part added protection on bearing surfaces and keeps the plug from being accidently pushed down through the hole in the mating part. Provides protection from damage, dirt, moisture and corrision during storage and transportation.

{0} variants (Filters applied) {0} variants (No filters applied)

O-Ring Face Seal Caps

In stock In production

O-Ring Face Seal caps are designed to protect O-Ring face seal connectors used on UNF and JIC hydraulic connections. The OFR series has a longer overall length and includes a molded retaining ring at the bottom that snaps under the connector to keep it securely in place during transit and processing.

{0} variants (Filters applied) {0} variants (No filters applied)

Round End Caps - Standard

In stock In production

Round End caps are designed to protect outside diameters of threaded or non-threaded tubing, pipe and rods. They are available in a wide range of sizes and lengths depending on your application needs. Any part number that has a W/R or AR found in it has an internal molded ring or internal ribs for extra gripping power and superior retention.

{0} variants (Filters applied) {0} variants (No filters applied)

Circular Connector Caps

In stock In production

Circular Connector Caps made from Red Low-Density Polyethylene (LDPE). A cost effective cap for a circular connector, they are designed for easy assembly and removal either with automated equipment or by hand.

This range of protective round connector caps is typically used to protect connectors with a standard thread. The range also features caps that can be used for electrical connectors per Military Standard 90376.

  • Offers protection from dirt, dust, and moisture during transit and storage.

{0} variants (Filters applied) {0} variants (No filters applied)

Round Vinyl End Caps

In stock In production

Our wide range of Round Vinyl End Caps is made from Polyvinyl Chloride (PVC). The round plastic end caps flexible material can stretch on to larger dimensions for a snug fit without tearing, splitting or shredding.

Vinyl protective caps are typically used to protect threaded or non-threaded tubing, rods, pipe or paper tubes. These round vinyl caps have a glossy and attractive finish that makes them ideal for use as a decorative vinyl pipe end caps.

Our round PVC cap color options include;

  • DM - Black - 75 Durometer
  • DMS - Red - 63 Durometer

The red vinyl end caps are highly visible, making it useful in high risk assemblies. All vinyl tube end caps are suitable for temperatures ranges up to 350F.

{0} variants (Filters applied) {0} variants (No filters applied)

Packaging Tube Caps

In stock In production

Packaging Tube caps are designed with an internal rib that provides a quick and tight fit on packaging tube containers. Used on packaging tube I.D.'s 1/4" through 1-3/4" with .045" wall thickness.

{0} variants (Filters applied) {0} variants (No filters applied)