Flexible End Caps - High Temp
Flexible High Temp End caps PVC material is flexible and good up to a temperature of 425F. This economical part has excellent chemical resistance and can be used in Powder Coating, E-Coating, Plating and general paint line applications.
Threaded Sealing Caps - Metric Threads
Metric Threaded Sealing Caps are fitted with an internal neoprene rubber sealing disk to limit contamination from deposit and entry of particules. They are suitable to protect metric threads. While hand tightening is recommended, the cap can be applied or removed by wrench or socket at a low torque.
Tapered Caps & Plugs - Standard
Standard Tapered Caps & Plugs are designed for each part to cap multiple O.D.’s or plug multiple I.D.’s. The durable material protects against damage, dirt, moisture and corrosion during storage and shipping.
Masking Straight Caps
Masking Straight caps fit over studs, pins or tube ends to provide an excellent masking solution. They can also be used to plug holes if inverted. These reusable caps come in a premium high temp silicone material or in a economical reduced temp EPDM material. Applications include Powder Coating, E-Coating, Plating and Anodizing. Multiple colors are available for color coding applications.
Round Vinyl End Caps
Push-fit Vinyl Round End Caps can stretch onto larger dimensions for a snug fit without tearing, splitting, or shredding. The glossy and attractive finish makes this cap ideal for use as a decorative end cap.
Threaded Protection Caps - BSP/Gas Threads
Threaded Protection Caps are used throughout the automotive, fluid power and engineering industries. They protect threaded components from dust, moisture and damage. The range is suitable for BSP/Gas threads.
Round End Caps - Standard
Standard Round End Caps are non-threaded and available in a wide range of sizes. They are ideal for protecting threaded or non-threaded tubing, pipes and rods. Standard, short and long caps are available. The short versions are for general purpose closure and the long versions have an extra depth and feathered edge which ensure a tight fit. The design of these longer caps helps to prevent accidental displacement. All are available in a wide range of sizes.
Threaded Protection Caps - Metric Threads
Threaded Protection Caps are used throughout the automotive, fluid power and engineering industries. They protect threaded components from dust, moisture and damage. The range is suitable for Metric threads.
Flanged Caps are designed to protect the thread of studs. They are used throughout the automotive and engineering industries for general protection. The flanges on the profiles have different sizes allowing socket wrench to function without removing the protection.
Tapered Caps & Plugs - Wide Flange
The large flange on this series of Tapered Caps/Plugs provides greater protection and easy removal. Designed for use as both a cap and a plug, Large Flange Tapered Caps/Plugs provide excellent protection from damage, dirt, moisture and corrosion during storage and transportation.
Stretch Fit Cover Caps
Stretch Fit Cover Caps act as masking bags designed to mask awkward shapes. They have an elasticated bottom to hold a bag onto an application. Their softening point is at 90 degrees Celsius and they can be used up to 100 degrees Celsius.
Tear-Tab Caps are easy and rapid solution to remove the cap from the part. By pulling the tab, the cap split wide open offering an easy solution to numerous applications. The range is suitable to UNF and NPT threads.
Quick Coupling Release Caps
Hydraulic Quick Coupling Release Dust caps are suitable to protect quick release couplings series ISO 7241-1 Series A and B. They are designed to remain attached to the hose and offer excellent protection from dirt, moisture and corrosion.
Threaded Sealing Caps - UNF Threads
UNF Threaded Sealing Caps protect and limit fluid leakage. These HDPE caps are resistant to solvents and reduce potential shearing. A neoprene sealing disk limits fluid leakage and the hexagonal head can be tightened by a wrench or socket at low torque but is hand tightening is recommended.
Finned Stud Caps
Finned Stud Caps are used to protect a wide range of studs. The internal fins provide a strong hold and are flexile to be suitable to various diameter with the use of one part, The range come with grip to ease the removal of the part and without grip.