Push-Fit End Caps

Driveshaft Protection caps are used to protect and mask the driveshaft and the bearings surrounding it. They fit DIN748, IEC 600-72, and ISO R775 drive shafts.

Hose Washer Caps are applied on hose and tube ends in order to prevent them from sliding over the fittings.

O-Ring Face Seal caps are designed to protect O-Ring face seal connectors used on UNF and JIC hydraulic connections. The OFR series has a longer overall length and includes a molded retaining ring at the bottom that snaps under the connector to keep it securely in place during transit and processing.

Packaging Tube caps are designed with an internal rib that provides a quick and tight fit on packaging tube containers. Used on packaging tube I.D.'s 1/4" through 1-3/4" with .045" wall thickness.

Rectangular Bar Stock Caps protect pipe bevels and internal walls from corrosion and damage. These heavy-duty caps accept crane hooks for moving pipe and are available with or without a vent hole.

Round End caps are designed to protect outside diameters of threaded or non-threaded tubing, pipe and rods. They are available in a wide range of sizes and lengths depending on your application needs. Any part number that has a W/R or AR found in it has an internal molded ring or internal ribs for extra gripping power and superior retention.

Round Hanger Caps are an attractive cap with a convenient hanger. They are flexible for easy fitting and offer good weather resistance.

Vinyl Round End caps are designed to protect outside diameters of threaded or non-threaded tubing, rods, pipe or paper tubes. The vinyl (PVC) material can stretch onto larger dimensions for a tight fit without tearing, splitting or shredding. The glossy and attractive finish makes this cap ideal for use as a decorative end cap.

Stretch Fit Cover caps are designed to mask awkward shapes and protect against dirt and moisture during storage and shipping. They have an elasticated bottom to hold it onto the mating part. This can also be used as a general paint mask in ambient temperature environments.

Standard Tapered Caps & Plugs are designed for each part to cap multiple O.D.’s or plug multiple I.D.’s. The durable material protects against damage, dirt, moisture and corrosion during storage and shipping.

The Wide Flange tapered cap & plug design gives this part added protection on bearing surfaces and keeps the plug from being accidently pushed down through the hole in the mating part. Provides protection from damage, dirt, moisture and corrision during storage and transportation.