Connector Dust Caps with Chain
Connector Dust Caps with Chains are threaded onto connector adapters when unmated to provide mechanical and environmental protection. The stainless steel material is suitable for harsh conditions.
FC Connector Port Dust Caps
FC Connector Port Dust Caps are threaded onto FC connector adapters to provide protection from outside elements. The cost-effective HDPE material is durable and available in a variety of colors.
Fibre Bend Limiting Tubing
Optical Fibre Bend Limiting Tubing offers the ultimate protection to fibres eliminating problems such as crushing, kinking and micro bending whilst supplying an entire self-managing solution to managing the routing of fibre
Fibre Bend Limiting Tubing - 1 to 4 Breakout
The 1 into 4 Optical Fibre Manifold enables small multiple fibrecables with aramid and similar strength reinforcement or central. GRP strength member to be mechanically and securely terminated. The manifold is stackable, and retains tubes greater than 100N. A development kit is also available that contains all adapters, OFM-4-05-19BLK
Fibre Bend Limiting Tubing - Clips, Hinged Top Lock
Fibre Bend Limiting Tubing Clips are snap fitting for easy installation and allow the running of Fibre Bend Limiting Tubing along a panel, enclosure or racking unit. They are hinge fitted which also aids the ease of installation and removal
Fibre Bend Limiting Tubing - Clips, Slotted
Optical Fibre Slotted Multi Brackets are designed using Miniflex technology. They are used at distribution points where orderly fibre management, protection and strain relief are required. An additional security feature allows fitting of a cable tie around the part which prevents removal of any retained tubes. They will hold a maximum of 12 tubes
Fibre Bend Limiting Tubing Tools
These OFBLT zip tools are used to install fibre into the OFBLTS slit tubing. The fibre is slid into the side of the tool. This is followed by the slit tubing being fed over the horn of the tool. The tool is then slid into the slit tubing, thus installing the fibre.
Fibre Clips - 16 Slot - 3.9mm, 3.4mm, 2.9mm
16 Slot Fibre Clips are designed to hold six 3.4mm, 3.9mm or 2.9mm diameter fibres. They can form a part of the larger EFA04 18 fibre clip which can be broken down to form individual clips which provides plenty of versatility
Fibre Clips - 4 Slot - 3.9mm
4 Slot Fibre Clips are designed to hold four 3.9mm diameter fibres. They can form a part of the larger EFA04 18 fibre clip which can be broken down to form individual clips which provides plenty of versatility