Push-In Rivets - Folding Leg
Pushing the pin into the rivet body causes the legs to expand and grip the material. The legs fold out to .73 mm wide. Once installed, the rivet cannot be removed from the outside of the box. Good for use with cardboard or other porous material. Available in black and natural.
Push-in Rivets - Barbed
These fir tree or barbed rivets have a ribbed design that ensures a fast and easy installation while securely holding into various materials such as wood, metal, foam, rubber and plastic. When pushed into a hole, the flexible ribs deflect then spring back to lock securely in place. Available in over 100 sizes and styles for different hole diameters and panel thicknesses.
Push-In Rivets - Key Hole Clip
These fasteners have a unique key-hole shaped interior which increases flexibility for easy assembly by hand. Angled panel lock section that takes up slack in panels to provide a tight fit. Available for a variety of hole diameters and panel thicknesses
Push-In Rivets - Push In Fasteners
These push in rivets provide an inexpensive, fast way to fasten object together. They may also be used as a hole plug or as push-in bumpers. The legs provide compression and expansion to lock the rivet into a pre-punched hole. Easily installed by hand
Push-In Rivets - Arrow Clip
Push-in rivets typically require no tools for installation; they fit easily with a push. Fasten thin gauge material or lightweight components. Buttonhead ios suitable for the front of panels. Natural and Black colours available.
Snap-Together Rivets - Male/Female Ratchet
The male clip is ratcheted into the female washer to hold surfaces together. Ideal for fixing corrugated panels. Fast installation. One pack contains 1,000 each of the clips and washers. Colours: Black, White and High Clarity. Washers - LDPE, Clips - PP
Snap-Together Rivets - Male/Female Push
Also known as Assembly Clips, these two part fasteners have teeth that grip together for quick fastening. Leaves smooth appearance on both sides. Each pack includes the male and femal versions. Available in black and white. Nylon 6/6
Push-In Rivets - Drive Fasteners
These drive fasteners are a multi-purpose, front loaded fastener. They have a hollow body which increases their flexibility for ease of insertion and removal. Can be used as a decorative hole plug. Easily inserted by hand. Available in both UL94 V-2 and UL94 V-0 rated materials
Push-In Rivets - Clinch
These expansion rivets can be set blind without the need for access to the back of the panel. Set by png the mandrel head into the rivet body, expanding the rivet body and causing it to flare against the reverse side. When sufficient force is applied, the mandrel will snap at its break point. Installed with a pop rivet installation tool (not currently offered by Essentra). Provides an extremely strong hold. Particularly good for soft materials.
Push-In Rivets - Heat Sink
Fasten a heat sink to a processor chip on a PCB. They have an integrated spring that provides continuous pressure to the heat sink until the thermal adhesive cures. The HSR-2 has a cross molded in allowing it to be installed by using a phillips head screwdriver