PCB Mounting Pillars

We found 81 product types for PCB Mounting Pillars

Need a Quote?

For large volumes and customised products, add to your cart and click request a quote, or email sales@essentracomponents.es and we will respond within 2 working days

Filter Products

  • of 4
List Grid

PCB Standoffs - Hexagonal/Metal

In stock In production

The male to male standoffs are designed to be installed by hand and do not require assembly equipment. The hexagonal metric standoffs are suitable for a wide range of applications.

{0} variants (Filters applied) {0} variants (No filters applied)

PCB Support Pillars - Stacking/Self Retaining

In stock In production

These self-retaining spacers snap into the board and maintain spacing even when the screw is removed. This version is stackable for multiple level PC board applicatiopns.

{0} variants (Filters applied) {0} variants (No filters applied)

PCB Support Pillars - Arrowhead Snap Lock/Arrowhead Snap Lock/Tension Wings/Rubber Centre

In stock In production

The standard snap lock support is ideal for quick assembly in PCB stacking applications and the snap lock and tension wings add a secure hold while the snap fit feature adds an ease of application

{0} variants (Filters applied) {0} variants (No filters applied)

Round Unthreaded PS Spacers

In stock In production

Our range of polystyrene PS (Polystyrene) spacers can be found in white or black, and in a wide range of sizes. These offer good thermal and electrical insulation.

{0} variants (Filters applied) {0} variants (No filters applied)

PCB Standoffs - Round/Threaded/Plastic

In stock In production

These Female to Female Standoffs are designed to be installed by hand and do not require assembly equipment. The round metric standoffs are suitable for a wide range of applications and the threaded spacer will allow easy assembly

{0} variants (Filters applied) {0} variants (No filters applied)

PCB Standoffs - Hexagonal Bottom /Metric Threaded/Insulator/Nylon & Brass

In stock In production

These Female to Female Standoffs are designed to be installed by hand and do not require assembly equipment. The hex standoffs are suitable for a wide range of applications and are ideal for use when high mechanical strength is required and provide sturdy, insulated spacing for high power electronic applications. They are made of nylon with brass inserts and are rated UL94 V-2.

{0} variants (Filters applied) {0} variants (No filters applied)

PCB Standoffs - Round

In stock In production

These Male Standoffs are designed to be installed by hand and do not require assembly equipment. The round standoffs are suitable for a wide range of applications and are ideal for use when high mechanical strength is required and provide sturdy, insulated spacing for high power electronic applications. They are made of nylon with brass inserts and are rated UL94 V-2.

{0} variants (Filters applied) {0} variants (No filters applied)

Round Unthreaded PA Spacers

In stock In production

Round, unthreaded spacers are made from PA ( Polyamide), or Nylon, and can be found in a range of lengths and diameters. These offer physical spacing for your assemblies, as well as providing thermal and electrical insulation between components. Glass filled PA is also available for applications where higher maximum service temperatures are required, as well as improved strength and stiffness.

{0} variants (Filters applied) {0} variants (No filters applied)

Round Unthreaded Metal Spacers

In stock In production

A versatile and strong spacer that is ideal for decorative applications. This range can be purchased in a variety of sizes in Stainless Steel or Nickel Plated Brass.

{0} variants (Filters applied) {0} variants (No filters applied)

PCB Support Pillars - Collar Spacer

In stock In production

These collar spacers are a two piece application; the pin and the retainer. They were designed to capture the PC board. The combination of the mating parts forms a completely enclosed nylon spacer. The use of a binding head type screw is recommended.

{0} variants (Filters applied) {0} variants (No filters applied)

Non Threaded Spacer - Ceramic

In stock In production

The Non threaded spacers are designed to be installed by hand and do not require assembly equipment. They are suitable for a wide range of applications.

{0} variants (Filters applied) {0} variants (No filters applied)

PCB Support Post - Dual Locking/Mini

In stock In production

These spacers have a locking teardrop design. These snap into very small holes and leave a very low protrusion over the panel. Available in many sizes and styles

{0} variants (Filters applied) {0} variants (No filters applied)

PCB Support Pillars - Edge Locking Screw Mount/Long Nose

In stock In production

Edge Locking Supports provide a secure hold on the side of the PCB allowing for easy removal. Screw mount supports are very secure and reliable. These mount with a self-tapping screw.

{0} variants (Filters applied) {0} variants (No filters applied)

PCB Spacer - Push In/Teardrop

In stock In production

These push-in spacers are designed to support heavily loaded circuit boards. No through hole is required in the board which allows for easy access to the underside of the board. These have a flanged base to keep them steady

{0} variants (Filters applied) {0} variants (No filters applied)

PCB Support Pillars - Locking/Cupped Reverse

In stock In production

These reverse mounts PCB support pillars are installed from the underside of the chassis. They have a thin buttonhead for minimal protrusion under the chassis. The top of these is a locking arrowhead that holds the PC Board in place.

{0} variants (Filters applied) {0} variants (No filters applied)

Self Adhesive PCB Support Pillars - Flat Rest Mount

In stock In production

Adhesive Base Supports come with a double sided adhesive tape with a release tab for quick installation and the flat rest mount is a secure support option

{0} variants (Filters applied) {0} variants (No filters applied)

PCB Corner Edge Locking Supports

In stock In production

Edge Locking Supports provide a secure hold on the side of the PCB and the snap in fitting is ideal for quick assembly

{0} variants (Filters applied) {0} variants (No filters applied)

PCB Support Pillars - Reverse Dual Locking/Snap Fit/Two Prong

In stock In production

These reverse mount supports re installed from the underside of the chassis. They have a thin buttonhead for minimal protrusion under the chassis.

{0} variants (Filters applied) {0} variants (No filters applied)

PCB Support Pillars - Rivet Locking/Arrowhead

In stock In production

Designed to mount easily on chassis with plastic SR snap rivet. Allows mounting to a range of panel thicknesses, up to .341” thick. Button head on rivet for minimal protrusion on chassis underside

{0} variants (Filters applied) {0} variants (No filters applied)

PCB Support Pillars - Dual Locking/Snap Lock/Snap Lock Natural Nylon

In stock In production

These spacers are our most popular style. Both ends easily snap in by hand and lock into place. Available in many different styles for different spacer lengths, hole diameters, panel thicknesses and materials

{0} variants (Filters applied) {0} variants (No filters applied)

PCB Support Pillars - Flat Rest Mount/Locking Arrowhead

In stock In production

These push spacers are designed to support heavily loaded circuit boards. No through hole is required in the board which allows for easy access to the underside of the board. These have a flanged base to keep them steady

{0} variants (Filters applied) {0} variants (No filters applied)

PCB Spacer - Push In/Wide Base

In stock In production

These push spacers are designed to support heavily loaded circuit boards. No through hole is required in the board which allows for easy access to the underside of the board. These have a flanged base to keep them steady

{0} variants (Filters applied) {0} variants (No filters applied)

PCB Standoffs - Round/Metric Threaded/Insulator/Nylon & Brass

In stock In production

These Female to Female Standoffs are designed to be installed by hand and do not require assembly equipment. The round standoffs are suitable for a wide range of applications and are ideal for use when high mechanical strength is required and provide sturdy, insulated spacing for high power electronic applications. They are made of nylon with brass inserts and are rated UL94 V-2.

{0} variants (Filters applied) {0} variants (No filters applied)

PCB Standoffs - Hexagonal/Non Undercut

In stock In production

These Male to Female Standoffs are designed to be installed by hand and do not require assembly equipment. They are simple to install thanks to their screw in design. These Hexagonal Brass Standoffs are suitable for a wide range of applications and are available in both non-undercut and undercut versions. Non-undercut spacers offer greater stability but require a washer for installation. Undercut spacers are much quicker to install and don't require the use of a washer

{0} variants (Filters applied) {0} variants (No filters applied)

PCB Standoffs - Hexagonal/Plastic

In stock In production

These Male / Male Standoffs are designed to be installed by hand and do not require assembly equipment. The hex standoffs are suitable for a wide range of applications and the threaded spacer will allow easy assembly. Available in several thread sizes and spacer lengths.

{0} variants (Filters applied) {0} variants (No filters applied)
  • of 4