Screw and barrel post set forms are an easy and secure binding component. They are supplied in a set that include the screw and receptacle.
Cap Nuts, also known as a Blind Nut or a Crown Nut, is a nut that has a domed end on one side. The Domed Cap Nut is used to cover exposed threaded stud, rod and bolt ends with a dome-like cap. This offers protection and safety to the fastening assembly, while also creating a finished appearance to the exposed threaded end.
Our range is made up from Hex Cap Dome Nuts that feature a hexagonal nut shape with the dome or cap that encloses external threads. They are offered with or without a molded-in locking thread for applications which require torque for a more secure assembly.
Nylon Eye Bolts are designed for light-duty applications. Since they are made of Nylon they have excellent dielectric properties and are corrosion-resistant to numerous solvents and oil-based products.
Finishing washers have good insulation properties, have a high quality finish and give excellent protection against damage to your application.
Hex Head Screw and Bolts are available with and without slotted heads. Offered in a variety of standard imperial and metric sizes as a replacement to all metal versions. They are a light-weight, vibration-, chemical-, electrical- and corrosion-resistant option.
Cupped Washers, also known as Insulator Washers, are designed to protect the head of a metal screw from electrical contact.
Our Cup Washer range is made from Nylon 6/6 that benefits from a UL94 V2 flame rating, as well as being corrosion resistant, and have resistance against oil and most chemicals.
This insulator washer range can accommodate the most common screw head styles, including; Cheese, Pan and Fillister.
Jam Nuts, also know as Thin Hex Nuts, are a low-profile type of nut. Typically they are half as tall as a standard nut. It is commonly used as a type of locknut, where it is 'jammed' up against a standard nut to lock the two in place or where a standard nut will not fit. These light-weight nylon versions offer a vibration-, chemical- and corrosion-resistant option to metal variants.
Our range of thumb screws is extensive, and includes these Knurled Head Screws; they are a type of washer-faced knurled thumb screw hat have a slotted drive in the screws head. The head on the plastic thumb screw is designed to make single-handed turning easier.
They are an ideal option for assemblies where components are modified on a regular basis - such as access panels. The manual operation means the knurled thumb screws are very important and can be used in many types of industrial applications.
Our knurled thumb screw range is made from natural Nylon 6/6, that is flame resistant to UL94 V2 standards.
Fasteners used for fastening license plates to motor vehicles.
Binder Head Screws available in standard imperial sizes as a replacement to all metal screws. They are a light-weight, vibration-, chemical-, electrical- and corrosion-resistant option.
Our Cheese Machine Screws are offered in standard metric sizes, and are a sound replacement for metal screws.
A Cheese Head Screw has a head with cylindrical sides with a flat disc top, and a flat bearing surface. The Cheese Head Machine Screw head is approximately half of its diameter, and features a slot drive.
Cheese Machine Screws are commonly used in appliance manufacturing, automotive applications, and electrical fixing components. They are a lightweight option, which benefits from resistance to vibrations, most chemicals, electricity, and corrosion.
Flange Nuts feature a wide flange at one end, offering a combined washer function. This design provides even distribution of the nut over the component being secured. Thus reducing the risk of damage, with less likelihood of loosening caused by an uneven surface.
Our plastic flange nut offer is made of natural Nylon 6/6, with a UL94 V2 flame resistance. We have a choice of styles including imperial and metric Hex Flange Nuts, and Self-Threading Lock Nuts. These lock nuts are designed for use with steel bolts. Threads are created when assembled to ensure a secure fit.
Flat Washers for screws made from a variety of plastics. Also known as plain washers, these plastic washers are among the most commonly used. The flat washer helps evenly distribute the load of a fastener, such as a nut, whilst helping to reduce heat and friction during the process of tightening.
Our wide range features a vast array of sizes, with large plastic washers that are suitable for a number of metric threads. We also offer a choice of materials, including a core offering of nylon flat washers. The range is made from Nylon 6/6, with a flame resistance of UL94 V2, these nylon washers are resistant to corrosion and most chemicals.
Other plastic washers for sale include a clear Polycarbonate (PC) washer that offers high transparency. Also featured is a selection of hard plastic washers like Polyether Ether Ketone (PEEK) plastic washers, which provide excellent mechanical and chemical resistance. They are UL94 V0 rated and have a light brown appearance. Perhaps our Polypropylene (PP) flat washer is your washer of choice? Natural in appearance, this washer has good chemical and moisture resistance. We also stock a range of black plastic washers made from Polyvinyl Chloride (PVC), which have moisture and abrasion resistance properties.
Nylon Grommet Nuts provide a low-cost positive connection to thin gauge materials like sheet metal or PCB's, as an alternative to using a Standard Nut. They snap-in place and when a metal screw is inserted; the locking fingers expand to secure the assembly in place. The nylon grommet head provides electrical and thermal insulation and corrosion resistance, and creates a vibration-resistant connection.
The hexagonal shape with its six flat sides provides an easy way to tighten and loosen this Nylon Hex Nut when using a standard wrench, as they are designed to either SAE imperial or metric sizes. Nylon Hex Nuts are non-conductive and offer corrosion resistance and a lasting hold.
These Thumb Screws have a flat, oval-shaped tab-like thumb head that provides added leverage and extra grip for tightening the screw into an assembly, and without the need to tools.
The tool-free, hand operating feature allows easy and simple fastening, particularly in applications that require regular adjustment.
Thumb Screws are easy to apply and fasten by hand thanks to the easy-to-grip knurled surface.
Slotted and Phillips Oval Head Screws that are available in standard metric and imperial sizes as a replacement to metal screws. They are a light-weight and have resistance to vibration, chemicals, electricity and corrosion.
Slotted round head Machine Screws are offered in a variety of standard sizes as a replacement to all metal versions. They are a light-weight, vibration-, chemical-, electrical- and corrosion-resistant option.
Wing Screws, are a type of plastic thumb screw that is designed to be manually fastened or released by hand. The wing thumb screw head has a wing-like projection, with which provides the thumb and forefinger leverage during the fastening process. Also known as thumb bolts, these handy precision screws are frequently used in consumer goods products.
We offer a flat head wing screw that is made from natural Nylon 6/6, and features a square shaped wing with a rectangular drive - so a small key or wrench can be used to tighten or loosen the wing screw as well as by hand. The thumb screws have a flame resistance rating of UL94 V2. They ranged in a choice of thread sizes, including 1/4-20 nylon thumb screws.
With options for slotted and Phillips; these Fillister Head Screws are available in standard metric and imperial sizes as a replacement for metal screws. They are a light-weight with resistance to vibration, chemicals, electricity and corrosion.
Phillips Flat Head Screws that are available in standard imperial sizes with an 82-degree chamfer as a replacement to all metal screws. They are a light-weight, vibration-, chemical-, electrical- and corrosion-resistant option.
Slotted Flat Head Screws available in standard imperial sizes as a replacement to all metal screws. They are a light-weight, vibration-, chemical-, electrical- and corrosion-resistant option.
Plastic Machine Screws with a pan head shape are available in a choice of Slotted and Cross (Phillips Fillister) drive types, and come in both standard metric and imperial sizes - making them a great alternative to metal screws.
Our pan head machine screws are lightweight with electrical, corrosion and vibration resistance, and is resistant to most chemicals. Material options include Nylon pan screws, made from flame retardant Nylon 6/6, and a Polycarbonate (PC) option that also offers flame resistance. The PC Slotted or Phillips Pan Head Screw is transparent in appeance and provides exceptionally high impact strength. Polycarbonate is unaffected by greases, oils and detergents. The Slotted or Phillips Nylon Machine Screws are natural in appearance.
Thumb Nuts are a type of nut with a knurled outside diameter (surface). This design facilitates manual tightening by hand, and also secures the nut into a handle or cover. They are typically used in applications where the fasteners will be removed regularly.
Made from Natural Nylon 6/6, a strong, tough and durable material that is ideal for connecting elements and other technical components. It has self-lubricating properties, and is resistant to moisture, vapor and salt water. Our Plastic Thumb Nut range features slotted and non slotted options.