End Caps

We found 64 product types for Plastic End Caps

Need a Quote?

For large volumes and customised products, add to your cart and click request a quote, or email sales@essentracomponents.it and we will respond within 2 working days

Filter Products

  • of 3
List Grid

Tube End Caps

In stock In production

Tube End Caps offer ideal protection for threaded or non-threaded tubing, pipes and rods. Standard, short and long caps are available. The short versions are for general purpose closure and the long versions have an extra depth and feathered edge that ensure a tight fit. The design of these longer caps helps to prevent accidental displacement. Tube End Caps serve the same purpose as Heat Shrink End Caps, but do not shrink when heated during the application process. They are UV and weather resistant, making them ideal outdoor applications.

{0} variants (Filters applied) {0} variants (No filters applied)

Standard Round End Caps

In stock In production

Standard Round End Caps are non-threaded and come available in either Red or Natural Nylon. We offer a wide range of sizes to suit your application. They are ideal for protecting threaded or non-threaded tubing, pipes and rods. Standard, short and long caps are available. The short versions are for general purpose closure and the long versions have an extra depth and feathered edge which ensure a tight fit. The design of these longer caps helps to prevent accidental displacement.

{0} variants (Filters applied) {0} variants (No filters applied)

Ribbed Pipe End Caps

In stock In production

These Ribbed Pipe End Caps are non-threaded and are available in either Red or Yellow, we offer a wide range of sizes to suit your application. They are ideal for protecting threaded or non-threaded pipes, tubes or rods. Standard, short and long caps are available. The short versions are for general purpose closure and the long versions have an extra depth and feathered edge which ensure a tight fit. The design of these longer caps helps to prevent accidental displacement.

{0} variants (Filters applied) {0} variants (No filters applied)

Heavy Duty Pipe Caps

In stock In production

These Heavy Duty Pipe Caps are suitable for nominal pipe sizes and are a low cost, but high quality option. They are made from Black or Yellow Polyethylene. The internal ribs ensure a tight fit and release after pressure build up. The caps are available with or without a vent hole.

{0} variants (Filters applied) {0} variants (No filters applied)

Non-Threaded End Caps

In stock In production

Our Non-threaded End Caps are available in wide selection of sizes and are made from Low-Density Polyethylene, in blue. They are ideal for protecting threaded or non-threaded tubing, pipes and rods. Standard, short and long caps are available. The short versions are for general purpose closure and the long versions have an extra depth and feathered edge which ensure a tight fit. The design of these longer caps helps to prevent accidental displacement.

{0} variants (Filters applied) {0} variants (No filters applied)

Round Hanger Caps

In stock In production

These Black PVC Round Hanger Caps are an attractive cap with a convenient hanger. They are flexible for easy fitting and offer good weather resistance, making them a good choice for outdoor applications.

{0} variants (Filters applied) {0} variants (No filters applied)

Square End Caps - Heavy Duty

In stock In production

These Black PVC Square End Caps are available in a range of sizes that are ideal for square tubes. The Square Gloss Caps are an ideal finishing product for tubular products and are flexible and easy to fit, offering an attractive gloss finish.

{0} variants (Filters applied) {0} variants (No filters applied)

Oval Feet Ferrules

In stock In production

These Black Oval Ferrules provide a neat cover to oval shaped tubes. They can be used for finishing, protection and are essentially applied to cover sharp tube edges. The PVC material offers flexibility for easy fitting and removal.

{0} variants (Filters applied) {0} variants (No filters applied)

Round Feet Ferrules - Standard

In stock In production

Our Round Ferrules provide a neat cover to round shaped tubes. They can be used for finishing, protection and are essentially applied to cover sharp tube edges. Our standard Round Ferrules are available in a choice of materials, including; Nylon, PVC and Low-Density Polyethylene. We also offer a choice of colour options; White, Natural and Black.

{0} variants (Filters applied) {0} variants (No filters applied)

Round Feet Ferrules - Tapered

In stock In production

Our Round Tapered Ferrules act as a protective cap for protruding wire, steel rods or bars. They give a neat finish to tubular products and are flexible for easy fitting. Our range is made from PVC and available in either Black or White.

{0} variants (Filters applied) {0} variants (No filters applied)

Square Feet Ferrules

In stock In production

These Black Low-Density Polyethylene Square Ferrules provide a neat cover to square shaped tube inserts, SQR, LSQR and SIG series parts. They can be used for finishing, protection and are essentially applied to cover sharp tube edges.

{0} variants (Filters applied) {0} variants (No filters applied)

Gas Cylinder Valve Caps

In stock In production

These Yellow Low-Density Polyethylene Gas Cylinder Valve Caps are developed in conjunction with major European gas companies. They protect industrial gas valves from ingress of dust and dirt. They are tamper evident, reducing potential risks. There is variation in the design with a vent flat to allow safe release of gas. Our range is available in a selection of sizes to suit your application requirements.

{0} variants (Filters applied) {0} variants (No filters applied)

LPG Gas Caps

In stock In production

Black Low-Density Polyethylene LPG Caps, developed with the LPG industry to help prevent dangerous gas leaks. They meet LP Gas Association Code of Practice 15: Part 2. The part design incorporate a strap to help prevent loss and for ease of replacement. Test Pressure: Propane/mixes (type 1 & 2) 26 bar. Butane (type 3) 26 bar. Independently tested to withstand these pressures, while providing gas-tight seal, even under extreme temperatures and adverse conditions (test results and certificate available on request). Materials: Type 1: Plug: HDPE, Strap: LDPE Type 2: Cap: HDPE Type 3: Cap: HDPE, Strap: LDPE.

{0} variants (Filters applied) {0} variants (No filters applied)

Hose Washer Caps

In stock In production

Available in LDPE or TPR, these Hose Washer Caps are applied on hose and tube ends in order to prevent them from sliding over the fittings. Our range includes Yellow and Black colour options and offers a range of sizes to suit your application needs.

{0} variants (Filters applied) {0} variants (No filters applied)

Nut Protection Caps

In stock In production

Our Nut Protection Caps are available in a large range of sizes and are made from Polyethylene. The protective caps have excellent chemical and environmental resistance to guard exposed nuts and bolts. Ideal for protecting fasteners and creating a neat finished appearance in outdoor applications where durability is required. We offer a choice of colour options, including; Black, White and Grey. Our range is extensive and features a wide selection of sizes to suit many applications. You may also be interested in our range of Stud Protection Caps.

{0} variants (Filters applied) {0} variants (No filters applied)

Secure Cover Caps

In stock In production

These Secure Cover Caps snap securely into place to protect and conceal a bolt head or nut on point of sale products, furniture, and outdoor equipment. The Caps and bases can be mixed and matched in six different colours to create a customized appearance. Multiple size options are available in our rage, to suit your application needs.

{0} variants (Filters applied) {0} variants (No filters applied)

Snap-on Nut Caps

In stock In production

These Low-Density Polyethylene Snap-On Nut Caps are a cost effective solution to cover exposed nuts and bolts to improve the finished appearance and an application. Our range includes a large selection of size options to suit your needs.

{0} variants (Filters applied) {0} variants (No filters applied)

Finned Stud Caps

In stock In production

These Low-Density Polyethylene Finned Stud Caps are used to protect a wide range of studs. The internal fins provide a strong hold and are flexile to suit various diameters with the use of just one part. The range comes with a grip to ease the removal of the part and are also available without the grip. Our offering includes Natural LDPE and Yellow colour options.

{0} variants (Filters applied) {0} variants (No filters applied)

Flanged Caps

In stock In production

Flanged Caps are designed to protect the thread of studs. They are used throughout the automotive and engineering industries for general protection uses. The flanges on the profiles have different sizes allowing a socket wrench to function without removing the protection. We offer a selection of materials, including; LDPE, TPR, PVC and Silicone. Our range also includes colour options; Natural, Red and Black and wide choice of sizes to suit your application needs.

{0} variants (Filters applied) {0} variants (No filters applied)

Pull Tab Caps

In stock In production

Our Vinyl Pull Tab Caps have a large pull tab allowing easy removal from the component. The PVC or EVA material used for these ranges provide good tensile strength, toughness and increased flexibility. Our range includes colour options; Black, Red and Yellow, with a wide choice of sizes to suit your application needs.

{0} variants (Filters applied) {0} variants (No filters applied)

Tear Tab Caps

In stock In production

These LDPE Tear Tab Caps are a rapid solution to fit and remove from the part. By pulling the tab, the cap splits wide open offering an easy solution to numerous applications. The range is suitable to UNF and NPT threads and is available in Natural, Blue and Yellow colours. We offer a wide range of sizes to suit many application needs.

{0} variants (Filters applied) {0} variants (No filters applied)

Scaffolding End Caps

In stock In production

Standard End Caps are an ideal solution for applying to the end of scaffolding poles and other applications due to their bright colours that allow for high visibility. They are quick and easy to use and can be uses indoors, as well as out. They are available in Yellow, Orange, Blue and Green and are made from LDPE.

{0} variants (Filters applied) {0} variants (No filters applied)

Pozidrive Screw Caps

In stock In production

These Pozidriv Screw Caps are designed to cover Pozidriv (Phillips or Crosshead) screws. Quick and easy installation, these screw caps offer protection to the screw head, as well as providing a tidy finish to your application.

{0} variants (Filters applied) {0} variants (No filters applied)

Allen Screw Caps

In stock In production

These Black LDPE Allen Screw Caps are used to conceal and protect exposed Allen Screws from dust, dirt and damage. We offer a small selection of size options, to suit your application needs.

{0} variants (Filters applied) {0} variants (No filters applied)

Cover Caps

In stock In production

Cover Caps, available in a choice of materials and colour options. Designed to cover screw heads and ideal for decorative purposes, these durable covers offer excellent ingress protection for a number of applications.

{0} variants (Filters applied) {0} variants (No filters applied)
  • of 3