(97 product groups)
37deg JIC Flared Fitting Threaded Plug
37 JIC Flared Fitting Threaded plugs are designed with a knurled head for easy finger installation. Used to seal light pressure requirements on 37 JIC flared fittings. Functionally equivalent to spec NAS-833, NAS-815 (MIL-C5501/1,MIL-C52078)
Air Conditioning Chargeport Sealing Caps
Air Conditioning Chargeport Sealing Caps are designed for sealing either the high pressure or low pressure sides of automotive air-conditioning systems. These durable caps are made of heat stabilized glass filled nylon with a neoprene, nitrile or HNBR seal. Your choices include high side, low side, high side with hole, and valve cap. Head styles available are round, knurled round or knurled with ribs.
All-Around ANSI Flange Covers
Our All-Around ANSI Flange covers provide complete all-around flange protection, easy to fit, durable and flexible. They are offered in yellow flexible polyethylene and protect both the full face and raised face of the flange. No fasteners required.
Angle Iron Caps
Angle iron caps fit common angle iron lengths and gauges. Our angle iron caps are made of LDPE making them affordable and resistant to some chemicals. Essentra Components angle iron caps can be used as caps on metal bed frames or shelves. These caps will not rust and eliminate the cost of welding steel closures.
Banjo Bolt Caps
Banjo Bolt caps feature a protection cap and retaining washer all in one unit. Our Banjo Bolt caps hold everything together during assembly, storage, and shipment. Banjo Bolt Caps protect against damage and dirt ingress. They are easy to grip, even when wearing gloves.
Banjo Union Plugs
Banjo Union plugs prevent damage, dirt, moisture and corrosion during storage and shipping of Banjo Unions. Used on Banjo Union DIN 7642 B/E.
Blanking plugs are used on sheet metal to protect against sharp edges and are ideal for closing panel cavities. They provide a clean finish and a quick solution. They come in a large offering to suit most common hole diameters and panel thicknesses. Two materials are available: PVC material for non-staining, resistance to ozone and sunlight; has excellent aging properties and TPE material which is very resistant to oils, acids and alkalies.
Body plugs are used in sheet metal to protect against sharp edges and are ideal for closing panel cavities. They provide a clean finish and a quick solution. They come in a large offering to fit imperial or metric hole diameters and panel thicknesses.
Bolt Head & Nut Caps
Bolt Head and Nut caps come in two styles and are supplied in a wide range of sizes. They protect against weathering and tampering while enhancing appearance.
Center Pull Plugs
Center Pull-Tab plugs offer an easy and quick center pull-tab to remove the part. The tapered plug design allows these parts to plug multiple inner diameters. Two materials offered: PE for basic protection needs and TPR to protect threaded holes and is acid-resistant.
Cross-Head Screw Caps
Cross Head Screw caps conceal and protect exposed Phillips cross head screw heads.
Driveshaft Protection Caps
Driveshaft Protection caps are used to protect and mask the driveshaft and the bearings surrounding it. They fit DIN748, IEC 600-72, and ISO R775 drive shafts.
Easy-Pull Masking Caps
Easy Pull Masking caps come in 2 styles and 3 materials. First style features an ergonomic pull-tab for easy removal. This style comes in High-Temp Vinyl material that has a good temperature rating and excellent chemical resistance. The second style has a wide flange design that provides a postitive seal and easy removal. It comes in 2 materials. Silicone, which is a premium masking material due to its high-temp rating, chemical resistance and reusability. EPDM, which is a more economical solution with reduced heat resistance. All items can be used in Powder Coating, E-Coating, Plating, Anodizing, Blasting, or general paint lines.
Finned Hole Plugs
Ideal for use in thin-walled copper tube, our Finned Plugs are quick to fit and easy to remove. Finned Plugs prevent ingress of dirt into tubing, and feature a small unobtrusive pull-tab. Offered in blue LDPE.
Finned Stud Caps
Finned Stud caps' unique internal finned design allows the cap to fit onto a range of stud diameters.
First Thread Protection Plugs
First Thread Protection plugs provide masking to the first thread of standard female threads. They have an ergonomically friendly pull-tab for simple installation and removal. These come in a premium high-temp silicone material or in a economical reduced temp EPDM material. Applications include Powder Coating, E-Coating, Plating and Anodizing.
Flange Protector Pins
Flange Protector pins are used with flange protector washers to securely fasten the RFL, PCF and PRB series Bolt Hole full face flange protectors to the flange.
Flange Protector Washers
Flange Protector washers are used with flange protector pins to securely fasten the RFL, PCF and PRB series Bolt Hole full face flange protectors to the flange.
Flanged caps are designed to protect threaded connectors or fittings but are used to fit both threaded or round surfaces. You can assemble or remove these caps by hand or automated equipment.
Flexible End Caps - Acid Resistance
Flexible Acid Resistance End caps are made of a Thermoplastic Elastomer material providing good flexibility and acid resistance to protect threads or unthreaded ends. The design comes with a hanging tab that works with support hooks.
Flexible End Caps - High Temp
Flexible High Temp End caps PVC material is flexible and good up to a temperature of 425F. This economical part has excellent chemical resistance and can be used in Powder Coating, E-Coating, Plating and general paint line applications.
Flexible Pipe Caps
Flexible Pipe caps protect threaded or non-threaded pipe ends and are resistant to cracking or splitting under normal use. These caps have outstanding toughness and are puncture-resistant with good flexibility, making assembly or removal easier.
Grease Nipple Caps
Grease Nipple caps are a low-cost effective solution to protect grease nipples from ingress of dirt when not engaged with its mating part. The cap is knurled to assure an easy grip and is fitted with a retaining washer to stay in place.
Hexagonal caps protect UNF, Metric and BSP hydraulic couplings and fittings. Suitable to protect both hexagonal or round fittings and couplings. Part design includes a central pull-tab for easy removal.
High-Temperature Tapered Plugs
Masking Tapered plugs are available as a solid plug or with a hollow core to aid in the compression to fit threaded or unthreaded holes. These reusable plugs come in a premium high-temp silicone material or in a economical reduced temp EPDM material. Applications include Powder Coating, E-Coating, Plating and Anodizing. Multiple colors are available for color-coding applications.