(24 product groups)
Angle Iron Caps
Angle iron caps fit common angle iron lengths and gauges. Our angle iron caps are made of LDPE making them affordable and resistant to some chemicals. Essentra Components angle iron caps can be used as caps on metal bed frames or shelves. These caps will not rust and eliminate the cost of welding steel closures.
Center Pull Plugs
Center Pull-Tab plugs offer an easy and quick center pull-tab to remove the part. The tapered plug design allows these parts to plug multiple inner diameters. Two materials offered: PE for basic protection needs and TPR to protect threaded holes and is acid-resistant.
Finned Stud Caps
Finned Stud caps' unique internal finned design allows the cap to fit onto a range of stud diameters.
Flanged caps are designed to protect threaded connectors or fittings but are used to fit both threaded or round surfaces. You can assemble or remove these caps by hand or automated equipment.
Nylon Glide Base Caps
Nylon Glide Base Caps are ideal for wooden furniture legs to protect floors and reduce noise. These glides easily knock into place and are provided in various finishes for a smooth glide action.
Open-End Pipe Caps
Open-End Pipe caps protect external threads on pipe ends, rigid metal conduit ends (RMC) or intermediate metal conduit ends (IMC). These are designed to grip onto the threads on the pipe.
Parallel Protection Plugs
Parallel Protection plugs for masking are made from a TPE material that is highly resistant to shredding and ideal for threaded applications. Also, this material has a good resistance to acids often used to remove rust from metal before any type of painting or powder coating operation is performed.
Push-Fit Bumpers & Rubber Feet - Bumper
Push-Fit Bumpers can be used as glides, bumpers, closures, slides, and stops in various applications. The press fit stem holds the bumper securely in place to protect surfaces from contact.
Round End Caps - Standard
Round End caps are designed to protect outside diameters of threaded or non-threaded tubing, pipe and rods. They are available in a wide range of sizes and lengths depending on your application needs. Any part number that has a W/R or AR found in it has an internal molded ring or internal ribs for extra gripping power and superior retention.
Round Leg Tips - Straight
Round Ferrule caps provide a neat finish to products manufactured from tubular steel. They can be used for finishing, protection and essentially to cover sharp tube edges.
Round Leg Tips - Tapered
Round Tapered Ferrule caps are used as a safety cap on protruding steel wire, rods, or bars. They give a neat finish to tubular products and are flexible for easy fitting.
Round Tube Insert Glides
Round Tube Inserts are available in both ribbed and straight wall designs. Available in a variety of finishes, materials, and colors.
Screw-On Bumper & Rubber Feet - Screw-On Bumper Feet
Screw-On Recessed Bumper Feet are ideally suited for use as feet on small appliances and other retail products. These feet are attached with a screw, bolt, or rivet to protect surfaces.
Sheet Metal Plugs
Sheet Metal plugs are an economical snap-in plug that provide an attractive finish and a secure fit for entry holes in sheet metal. Parts come in two styles, flat head or recessed head.
Side Pull Plugs
Side Pull plugs offer an easy and quick side pull-tab to remove the part. The tapered plug design allows these parts to plug multiple inner diameters. Two materials offered: PE for basic protection needs and TPR to protect threaded holes and is acid-resistant.
Snap-Fit plugs' design allows a single turn assembly providing a tight fit once pushed into position. The plug has a center tab to allow a strong grip for tightening and easy removal. The range is suitable for Metric, BSP and UNF threads.
Tear-Tab caps are designed with a tear-tab to remove the cap from the part. By pulling the tab, the cap will split wide open for easy removal. The range is suitable for UNF, SAE, JIC, NPT, BSP and Metric threads.
Threaded O-ring Plugs - UNF Threads
Threaded O-ring plugs for UNF Threads can be applied or removed by hand, hex wrench or screwdriver. The O-ring provides a watertight seal for superior leak protection.
Threaded Protection Caps - BSP/Gas Threads
BSP/Gas Threaded Protection caps are used to protect BSP/Gas threaded components from dust, dirt, moisture and damage.
Threaded Protection Caps - Metric Threads
Metric Threaded Protection caps are used to protect Metric threaded components from dust, dirt, moisture and damage.
Threaded Protection Caps - UNF/JIC Threads
Threaded Protection caps protect flared/flareless fittings and threaded components from dirt, dents and moisture. The threaded cap design with rolled threads allows you to push-on for easy application.
Threaded Protection Plugs - Quick Fit
Quick Fit Threaded Protection plugs are suitable for UNF, BSP and Metric thread sizes. They come with a knurled head to easily grip the head and the short thread allows a quick fit on the part.
Threaded Protection Plugs - UNF Threads
Threaded Protection plugs for UNF threads protect and keep dirt, dust or debris out of these threaded ports or fittings. Knurled head design makes the part easy to assemble or remove by hand.
Tube End Plugs
Tube end plugs provide an effective and efficient method of sealing circular tubes. Applications include secure closures for postal tubes and composite containers and for plugging plastic tubing.