(42 product groups)
For large volumes and customized products, add to your cart and click request a quote, or email sales@essentracomponents.com and we will respond within 2 working days.
Center Pull-Tab plugs offer an easy and quick center pull-tab to remove the part. The tapered plug design allows these parts to plug multiple inner diameters. Two materials offered: PE for basic protection needs and TPR to protect threaded holes and is acid-resistant.
Nylon Glide Base Caps are ideal for wooden furniture legs to protect floors and reduce noise. These glides easily knock into place and are provided in various finishes for a smooth glide action.
Parallel Protection plugs for masking are made from a TPE material that is highly resistant to shredding and ideal for threaded applications. Also, this material has a good resistance to acids often used to remove rust from metal before any type of painting or powder coating operation is performed.
Push-In Barrel plugs are general-purpose plugs built to cover and close a hole. These can be applied or removed quickly and have convexed sides designed to ensure a secure fit.
Round Tapered Ferrule caps are used as a safety cap on protruding steel wire, rods, or bars. They give a neat finish to tubular products and are flexible for easy fitting.
Our Snap fasteners include a Nylon option that is flame-rated UL94 V2, and an option that features a Low Density Polyethylene (LDPE) female washer that comes with a Polypropylene (PP) male clip.
The rivet assembly includes the male clip and the female washer that are used to join two surfaces together. They are an ideal choice for corrugated panels.
Round Ferrule caps provide a neat finish to products manufactured from tubular steel. They can be used for finishing, protection and essentially to cover sharp tube edges.
Plugs for SAE & NPT Threads are designed to be used to plug SAE & NPT tapered threaded fittings. This group covers sizes 1/4" through 6".
Flanged caps are designed to protect threaded connectors or fittings but are used to fit both threaded or round surfaces. You can assemble or remove these caps by hand or automated equipment.
Finned Stud caps' unique internal finned design allows the cap to fit onto a range of stud diameters.
Cross Head Screw caps conceal and protect exposed Phillips cross head screw heads.
37 JIC Flared Fitting Threaded plugs are designed with a knurled head for easy finger installation. Used to seal light pressure requirements on 37 JIC flared fittings. Functionally equivalent to spec NAS-833, NAS-815 (MIL-C5501/1,MIL-C52078)
Rectangluar Tube Inserts are available in both ribbed and straight wall designs. Available in a variety of finishes, materials, and colors.
Bolt Head and Nut caps come in two styles and are supplied in a wide range of sizes. They protect against weathering and tampering while enhancing appearance.
Hose Washer Caps are applied on hose and tube ends in order to prevent them from sliding over the fittings.
Grease Nipple Caps are designed to cover and protect the heads of Grease Nipples. Nipple Caps are a low-cost effective solution that protects against ingress of dust and dirt when not engaged with its mating part. They can also be used for other applications, including Glue Guns. The cap is knurled to assure an easy grip, and it is fitted with a retaining washer to help it stay in place.
Our Nipple Cap offer is made from Red Low Density Polyethylene (LDPE). These LDPE Nipple Caps are easy to use and install; they offer an ideal solution for any grease applicator, by covering the end-tip to prevent overflow and leakage from the substances contained within.
Angle Iron End Caps, also known as Angle Iron Covers or just Iron Angle, are an affordable answer to the problem of protecting floors from the sharp edges of angle furniture.
Angle Iron Caps are also used as caps on metal bed frames and shelves. They will not rust, and will also eliminate the cost of welding steel closures.
Banjo Bolt caps feature a protection cap and retaining washer all in one unit. Our Banjo Bolt caps hold everything together during assembly, storage, and shipment. Banjo Bolt Caps protect against damage and dirt ingress. They are easy to grip, even when wearing gloves.
Hexagonal caps protect UNF, Metric and BSP hydraulic couplings and fittings. Suitable to protect both hexagonal or round fittings and couplings. Part design includes a central pull-tab for easy removal.
Bumper Feet, also called Push In Bumpers, can be used as glides, bumpers, closures, slides and stops for a range of applications. These Rubber Bumper Feet had a simple push feet stem that holds the Push In Rubber Feet in place - allowing them to protect surfaces from contact.
Our Push In Rubber Bumpers range includes a wide variety of styles, including;
Break-Away Bumpers that are designed to be pulled from the inside of the chassis. These bumpers have a mounting tab that breaks away after assembly, to save save. Made from Black Silicone Rubber, available with a H Shore A Hardness rating of 40 and 50; Silicone is good for high temperature applications. An ideal alternative to the Break-Away Bumpers, are Blind Install Bumpers that are also made from Silicone Rubber with a 45 Shore A Hardness rating. They feature a cross drive that is molded into the head that allows for quick installation from the outside of the chassis. The user can install with wither a #1 Phillips head screwdriver or a smaller blunt end rod.
The Silicone range extends with Pull Mount Bumpers with a 65 Shore A Hardness rating. Pulled from the inside of the chassis. Black in appearance, the high temperature silicone material help to cushion and prevent skidding.
Also available are Flat and Domed head split-stem bumpers made from Natural Nylon 6. Produced with a split stem portion that makes insertion easy, but removal difficult. As well as being great bumpers, they are also suitable for use as panel plugs.
Continuing our Nylon Bumper range are Standard and Coved Stem Bumpers with a Natural appearance. Used to protect surfaces from contact, they are ideal for sheet metal, wood and tubing.
Flat Head Stem Bumpers are also available, in a choice of Natural Nylon or Black Low Density Polyethylene (LDPE). The flat head gives these bumpers a design that is able to rest against a flat or tangent surface. The step-type or tapered lead on the stem makes insertion easy. A simple press-fit on the shank holds the bumper in place securely.
Pipe & Conduit Open-End Pipe Caps, are a pipe cap that protects external threads on pipe ends, rigid metal conduit ends (RMC) or intermediate metal conduit ends (IMC).
Our pipe thread cap range is made from Polyethylene (PE). These Pipe Thread Protector Caps are sized and designed for positive-gripping power over the threads of the pipe.
Open-end Thread Protectors are available in a choice of colors, including; Black, Blue, Green, Orange, Red and Yellow.
Driveshaft Protection caps are used to protect and mask the driveshaft and the bearings surrounding it. They fit DIN748, IEC 600-72, and ISO R775 drive shafts.
O-Ring Face Seal caps are designed to protect O-Ring face seal connectors used on UNF and JIC hydraulic connections. The OFR series has a longer overall length and includes a molded retaining ring at the bottom that snaps under the connector to keep it securely in place during transit and processing.
Round End caps are designed to protect outside diameters of threaded or non-threaded tubing, pipe and rods. They are available in a wide range of sizes and lengths depending on your application needs. Any part number that has a W/R or AR found in it has an internal molded ring or internal ribs for extra gripping power and superior retention.
Circular Connector Caps made from Red Low-Density Polyethylene (LDPE). A cost effective cap for a circular connector, they are designed for easy assembly and removal either with automated equipment or by hand.
This range of protective round connector caps is typically used to protect connectors with a standard thread. The range also features caps that can be used for electrical connectors per Military Standard 90376.
Unfortunately your session was timed-out due to inactivity. Please login or reload page to continue