Protective caps for rotor and stator pump applications. These Pump Stator Caps are made from flexible Polyvinyl Chloride (PVC) that is Black in appearance. They provide maximum protection for stator pumps and rotors on progressive cavity pumps. The flexible PVC material makes installation quick and easy.
Sucker Rod Caps' heavy-duty design protects sucker rod pin ends during storage or transportation. Our cap has a hex head design that promotes easy removal in the field with an open or closed-end wrench.
Sucker Rod Plugs protect sucker rod coupling ends during storage or transportation. The pull feature allows easy removal of the plug in the field.
Ribbed pipe plugs are available in two styles with flexible ribs of different diameters to fit multiple schedules of NPT and drill pipe. The straight wall on the plug’s O.D. provides a secure friction fit with the mating pipe’s I.D. providing excellent protection against contaminants entering the pipe.
Tapered Caps and Plugs made from Red and Blue Low Density Polyethylene (LDPE). A versatile assembly that can be used as both a tapered cap or a tapered plug.
The tapered design allows the part to plug multiple inner diameters or cap multiple outside diameters. The Tapered Cap Plug protects the assembly against damage, dirt, moisture and corrosion during storage and shipping. The series has parts with a heavy duty design, which includes a rugged wall and seal rings for maximum protection.
To assure a proper fit;
Flange Protector Retainer Plugs offer an effective solution for securing full face protective discs (available to buy separately) to a pipes flange surface.
To install; simply insert the plug through the holes on the flange protector, and directly into the bolt holes for firm and secure protection.
The use of four plugs is recommended to firmly fasten each full face protective disc to its application.
Flange Protector pins are used with flange protector washers to securely fasten the RFL, PCF and PRB series Bolt Hole full face flange protectors to the flange.
Flange Protector washers are used with flange protector pins to securely fasten the RFL, PCF and PRB series Bolt Hole full face flange protectors to the flange.
Bolt Hole Flange protectors are easy to apply and attach simply with cable ties, retainer plugs or pins/washers. They provide a cost-effective full face protection on the exposed flange sealing surface. Flange protection disks are available in a variety of sizes and pressure ratings. ANSI Flanges: Sizes 1/2 inch to 36 inch Pressure Groups 150, 300, 400, 600, 900, 1500 and 2500 pounds. DIN Flanges: Sizes DN 10 to DN 600 Pressure Groups PN 6, 10, 16, 25 and 40. Bolt hole flange protectors are offered in HDPE, Corrugated PP and Pressboard. Require fasteners.
Adhesive Full Face Flange protectors are made of a PE material with adhesive backing that bonds tightly and leaves no residue when removed. These have a peel and stick design and require no fasteners. These cover the full face of the flange OD for all 150 pound rated flanges sizes 1/2" to 36". Meets ANSI B16.5 and ASME B16.47 specifications. No fasteners required.
SAE J518 Split-Flange covers protect machined surfaces on split flanged connections. Has an internal locking bead design that provides a secure fit. Made in natural see-through LDPE so the O-Ring on the flange can be seen through the cap. The Q series are used on SAE Code 61 3000 PSI high pressure flanges while the HP series are used on SAE Code 62 6000 PSI flanges. No fasteners required.
Our All-Around ANSI Flange covers provide complete all-around flange protection, easy to fit, durable and flexible. They are offered in yellow flexible polyethylene and protect both the full face and raised face of the flange. No fasteners required.
Self-Locking Full Face flange protectors are fast and easy to install or remove. The integral arrow design pushes through the flange bolt holes to fasten the protector firmly in place. No fasteners required.
Push-In Full Face Flange Protectors have flexible fins for a snug fit into the bore without using fasteners. The PE material protects ANSI B16.5 Class 150 flanges, DN2627-2638 and BS5504 flanges during finishing, storage, transit.
Flexible Pipe caps protect threaded or non-threaded pipe ends and are resistant to cracking or splitting under normal use. These caps have outstanding toughness and are puncture-resistant with good flexibility, making assembly or removal easier.
Adhesive Raised Face Flange protectors are a PE material with adhesive backing that bonds tightly and leaves no residue when removed. These have a peel and stick design and require no fasteners. These cover the raised face of the flange for 150, 300, 400, 600, 900, 1500 and 2500 pound rated flanges, sizes 1/2" to 12". Meets ANSI B16.5 and ASME B16.47 specifications. No fasteners required.
SAE J518 Studded Full Face Flange Protectors for SAE Code 61 (3000 - 5000 PSI) and Code 62 (6000 PSI) provide full coverage by inserting the lugs firmly into the bolt holes. The PE material is cost-effective and resistant to some chemicals. No fasteners required.
Raised Face Flange Protector plugs have a tapered design to fit snugly into the flange bore without requiring fasteners. The PE material protects raised machine faces and flange bores from dirt and moisture during shot and sandblasting operations. No fasteners required.
Studded Raised Face Flange protectors quickly fit into the flange's bolt hole for a tight and secure fit. The material is weather- and petroleum-resistant. These meet ANSI B16.5 and API specifications and are suitable for use on ASA and BS1560 flanges. Require no fasteners.
Pipe & Conduit Open-End Pipe Caps, are a pipe cap that protects external threads on pipe ends, rigid metal conduit ends (RMC) or intermediate metal conduit ends (IMC).
Our pipe thread cap range is made from Polyethylene (PE). These Pipe Thread Protector Caps are sized and designed for positive-gripping power over the threads of the pipe.
Open-end Thread Protectors are available in a choice of colors, including; Black, Blue, Green, Orange, Red and Yellow.
Push In Flange Protectors, also known as Raised Face Protectors, feature flexible fins for a snug fit into the bore without the need or use of fasteners. They protect raised face against dirt, moisture, paint and sand blasting.
Made from Yellow Polyethylene (PE), the parts fit 150, 300, 600, 900, 1500 and 2500 pound flanges.
Butt Weld plugs provides maximum protection for butt-weld ends on valves, pumps and heat exchangers. Will not crack or chip and eliminates the need for plywood, masonite and fasteners. Saves on labor assembly cost. The design matches the reverse butt-weld flange angle and completely covers and protects the end during shipping or storage.
Socket Weld Fitting plugs are designed to provide maximum protection for close fit socket weld applications. The straight wall on the plugs' OD provides a secure and friction fit with the mating parts' ID.
Pipe Caps protect threaded or non-threaded NPT pipe ends. Designed to grip over the outside diameter of the pipe while eliminating foreign materials from entering the pipe during storage or transportation.