PCB Spacers

We found 43 product types for Double-Sided Mounting PCB Spacers

Need a Quote?

For large volumes and customized products, add to your cart and click request a quote, or email sales@essentracomponents.com and we will respond within 2 working days.

Filter Products

  • of 2
List Grid

Self-Adhesive PCB Support Pillars - Flat Rest Mount

In stock In production

Adhesive Base Supports come with a double-sided adhesive tape with a release tab for quick installation and the flat rest mount is a secure support option

{0} variants (Filters applied) {0} variants (No filters applied)

PCB Edge Locking Supports - Rivet Mount

In stock In production

Edge Locking Supports come with a double-sided adhesive tape with a release tab for quick installation. It locks onto the board but is releasable with a pinch.

{0} variants (Filters applied) {0} variants (No filters applied)

PCB Support Pillars - Locking/Corner/Edge Screw Mount

In stock In production

These are Corner/Edge locking supports. They can be mounted to either the corner or the edge of a PCB requiring no holes or slots on the board. They are mounted on the bottom with a #6 self-tapping screw for a strong hold.

{0} variants (Filters applied) {0} variants (No filters applied)

Adhesive Base Support - Non-Locking

In stock In production

Adhesive Base Supports come with a double-sided adhesive tape with a release tab for quick installation. It locks onto the board but is releasable with a pinch.

{0} variants (Filters applied) {0} variants (No filters applied)

Adhesive Base Support - Threaded

In stock In production

Adhesive Base Supports come with a double-sided adhesive tape with a release tab for quick installation. It locks onto the board but is releasable with a pinch.

{0} variants (Filters applied) {0} variants (No filters applied)

PCB Support Pillars - Edge Holding with Nose

In stock In production

Edge Locking Supports provide a secure hold on the side of the PCB and the snap-in fitting and locating nose are ideal for quick assembly. The PCB is easily removed for service.

{0} variants (Filters applied) {0} variants (No filters applied)

Male To Female Standoff - Hexagonal, Plastic

In stock In production

Male To Female Standoffs come with a double-sided adhesive tape with a release tab for quick installation. It locks onto the board but is releasable with a pinch.

{0} variants (Filters applied) {0} variants (No filters applied)

Self-Adhesive PCB Support Pillars - Snap-Locking/Low Profile

In stock In production

Adhesive Base Supports come with a double-sided adhesive tape with a release tab for quick installation and the snap-locking types are ideal for quick installation with a low profile option for space saving capabilities

{0} variants (Filters applied) {0} variants (No filters applied)

PCB Support Pillars - Edge Locking Screw Mount/Long Nose

In stock In production

Edge Locking Supports provide a secure hold on the side of the PCB allowing for easy removal. Screw mount supports are very secure and reliable. These mount with a self-tapping screw.

{0} variants (Filters applied) {0} variants (No filters applied)

Self-Adhesive PCB Support Pillars - Non-Locking

In stock In production

Adhesive Base Supports come with a double-sided adhesive tape with a release tab for quick installation. It locks onto the board but is releasable with a pinch.

{0} variants (Filters applied) {0} variants (No filters applied)

Adhesive Base Support - Snap-Locking, Low-Profile, Cupped

In stock In production

Adhesive Base Supports come with a double-sided adhesive tape with a release tab for quick installation. It locks onto the board but is releasable with a pinch.

{0} variants (Filters applied) {0} variants (No filters applied)

PCB Support Pillars - Rivet Locking/Two-Prong

In stock In production

These innovative spacers are mounted to the panel with a rivet that is designed into the part. As you push the head of the spacer down, the legs expand locking it into place. They are available in 13 metric spacer lengths in a UL94 V-2 rated nylon.

{0} variants (Filters applied) {0} variants (No filters applied)

PCB Support Pillars - Rivet Locking/Stud

In stock In production

Designed to mount easily on chassis with plastic SR snap rivet. Allows mounting to a range of panel thicknesses, up to .341” thick. Button head on rivet for minimal protrusion on chassis underside

{0} variants (Filters applied) {0} variants (No filters applied)

PCB Support Pillars - Teardrop Snap-Lock/Bayonet Nose Snap-Lock

In stock In production

These spacers are locking on both ends. They are availabe in two different styles and many spacer options

{0} variants (Filters applied) {0} variants (No filters applied)

PCB Support Pillars - Flat Rest Mount/Locking Teardrop/Cupped

In stock In production

These push spacers are designed to support heavily loaded circuit boards. No through hole is required in the board which allows for easy access to the underside of the board. These are mounted into a small and protrudes very little under the board. They have a cupped base that provides a tight fit to the board as well as covering the hole completely.

{0} variants (Filters applied) {0} variants (No filters applied)

PCB Support Pillars - For Key Hole/Bayonet Nose

In stock In production

These spacers have a keyslot design that allows for easy removal to facilitate removal. The keyslot design leaves minimal protrusion below the board. The larger base on the keyslot side is for easy identification of mounting end

{0} variants (Filters applied) {0} variants (No filters applied)

PCB Supports - Locking Pull Mount, Rubber

In stock In production

PCB Supports come with a double-sided adhesive tape with a release tab for quick installation. It locks onto the board but is releasable with a pinch.

{0} variants (Filters applied) {0} variants (No filters applied)

PCB Support Pillars - Two-Prong Snap-Lock Large Base/Two-Prong Snap-Fit

In stock In production

These spacers are mounted on both sides with a low profile two-prong fastener. One side is locking and the other is a releasable snap-fit. They have a shoulder at the base for locating purposes to facilitate automated assemble. These come in several styles and spacers

{0} variants (Filters applied) {0} variants (No filters applied)

PCB Support Pillars - Fir Tree Mount Snap-Lock/Arrowhead Snap-Lock

In stock In production

These spacers have a fir tree fastener on one end and a locking bayonet nose on the other. The blind hole mount is flexible and will lock into round, threaded, punched or drilled blind holes

{0} variants (Filters applied) {0} variants (No filters applied)

PCB Support Pillars - Two-Prong Snap-Lock/Bayonet Nose Snap-Lock

In stock In production

These spacers are locking on both ends. They are availabe in two different styles and many spacer options

{0} variants (Filters applied) {0} variants (No filters applied)

PCB Spacer - Push-In/Wide Base

In stock In production

These push spacers are designed to support heavily loaded circuit boards. No through hole is required in the board which allows for easy access to the underside of the board. These have a flanged base to keep them steady

{0} variants (Filters applied) {0} variants (No filters applied)

PCB Support Pillars - Two-Prong Snap-Lock/Two-Prong Snap-Fit

In stock In production

These spacers are mounted on both sides with a low profile two-prong fastener. One side is locking and the other is a releasable snap-fit. These are available in a variety of styles

{0} variants (Filters applied) {0} variants (No filters applied)

PCB Support Pillars - Rivet Locking/Arrowhead

In stock In production

Designed to mount easily on chassis with plastic SR snap rivet. Allows mounting to a range of panel thicknesses, up to .341” thick. Button head on rivet for minimal protrusion on chassis underside

{0} variants (Filters applied) {0} variants (No filters applied)

PCB Support Pillars - Flat Rest Mount/Locking Arrowhead

In stock In production

These push spacers are designed to support heavily loaded circuit boards. No through hole is required in the board which allows for easy access to the underside of the board. These have a flanged base to keep them steady

{0} variants (Filters applied) {0} variants (No filters applied)

PCB Support Pillars - Fir Tree Mount/Snap-Fit

In stock In production

These spacers have a fir tree fastener on one end and a releasable bayonet nose on the other. The blind hole mount is flexible and will lock into round, threaded, punched or drilled blind holes

{0} variants (Filters applied) {0} variants (No filters applied)
  • of 2