(12 product groups)
Flange Protector Retainer Plugs are an effective solution for securing the RFL, PCF, and PRB series Bolt Hole full face flange protectors to the flange surface. Simply insert the plug through the flange protector and directly into the bolt holes for firm, secure protection. Four plugs are recommended to firmly fasten each full face protective disk.
Flange Protector pins are used with flange protector washers to securely fasten the RFL, PCF and PRB series Bolt Hole full face flange protectors to the flange.
Flange Protector washers are used with flange protector pins to securely fasten the RFL, PCF and PRB series Bolt Hole full face flange protectors to the flange.
Bolt Hole Flange protectors are easy to apply and attach simply with cable ties, retainer plugs or pins/washers. They provide a cost-effective full face protection on the exposed flange sealing surface. Flange protection disks are available in a variety of sizes and pressure ratings. ANSI Flanges: Sizes 1/2 inch to 36 inch Pressure Groups 150, 300, 400, 600, 900, 1500 and 2500 pounds. DIN Flanges: Sizes DN 10 to DN 600 Pressure Groups PN 6, 10, 16, 25 and 40. Bolt hole flange protectors are offered in HDPE, Corrugated PP and Pressboard. Require fasteners.
SAE J518 Split-Flange covers protect machined surfaces on split flanged connections. Has an internal locking bead design that provides a secure fit. Made in natural see-through LDPE so the O-Ring on the flange can be seen through the cap. The Q series are used on SAE Code 61 3000 PSI high pressure flanges while the HP series are used on SAE Code 62 6000 PSI flanges. No fasteners required.
Our All-Around ANSI Flange covers provide complete all-around flange protection, easy to fit, durable and flexible. They are offered in yellow flexible polyethylene and protect both the full face and raised face of the flange. No fasteners required.
Self-Locking Full Face flange protectors are fast and easy to install or remove. The integral arrow design pushes through the flange bolt holes to fasten the protector firmly in place. No fasteners required.
Push-In Full Face Flange Protectors have flexible fins for a snug fit into the bore without using fasteners. The PE material protects ANSI B16.5 Class 150 flanges, DN2627-2638 and BS5504 flanges during finishing, storage, transit.
SAE J518 Studded Full Face Flange Protectors for SAE Code 61 (3000 - 5000 PSI) and Code 62 (6000 PSI) provide full coverage by inserting the lugs firmly into the bolt holes. The PE material is cost-effective and resistant to some chemicals. No fasteners required.
Raised Face Flange Protector plugs have a tapered design to fit snugly into the flange bore without requiring fasteners. The PE material protects raised machine faces and flange bores from dirt and moisture during shot and sandblasting operations. No fasteners required.
Studded Raised Face Flange protectors quickly fit into the flange's bolt hole for a tight and secure fit. The material is weather- and petroleum-resistant. These meet ANSI B16.5 and API specifications and are suitable for use on ASA and BS1560 flanges. Require no fasteners.
Push In Flange Protectors, also known as Raised Face Protectors, feature flexible fins for a snug fit into the bore without the need or use of fasteners. They protect raised face against dirt, moisture, paint and sand blasting.
Made from Yellow Polyethylene (PE), the parts fit 150, 300, 600, 900, 1500 and 2500 pound flanges.