For large volumes and customized products, add to your cart and click request a quote, or email sales@essentracomponents.com and we will respond within 2 working days.
Push-In Barrel plugs are general-purpose plugs built to cover and close a hole. These can be applied or removed quickly and have convexed sides designed to ensure a secure fit.
Pull-Tab caps have a curved pull-tab design that provides more surface contact area, requiring less gripping force during installation and removal. The PVC material is flexible so it can stretch onto slightly larger dimensions for a snug fit without tearing, splitting or shredding.
Flanged caps are designed to protect threaded connectors or fittings but are used to fit both threaded or round surfaces. You can assemble or remove these caps by hand or automated equipment.
Propane Fuel Tank Cap protects propane valve threads during transit and storage from damage and contaminants. Standard dust caps, caps with retaining straps and caps with a tear feature are available.
Finned Stud caps' unique internal finned design allows the cap to fit onto a range of stud diameters.
Cross Head Screw caps conceal and protect exposed Phillips cross head screw heads.
Grease Fitting caps are made of soft yellow vinyl and guard grease fittings against dirt and moisture. The cap is easily applied and an inner lip adds a secure fit to grease fittings used in mechanical systems to feed lubricants into the bearing.
Snap Plugs, also known as Snap Fit Connectors, are made from Low-Density Polyethylene (LDPE) with a vibrant red appearance.
The LDPE plugs benefit from a simple snap fitting design that once pushed into position, a single turn gives a tight fit. The range also features options with a pull-tab for quick removal.
Each snap fit plug covers a range of different thread sizes and styles, including; Standard/JIC, Metric and BSP.
Overfill Prevention Device Cylinder Valve caps protect propane valve threads during transit and storage from damage and contaminants. Standard dust caps, caps with retaining straps and caps with a tear feature are available.
Bolt Head and Nut caps come in two styles and are supplied in a wide range of sizes. They protect against weathering and tampering while enhancing appearance.
Hose Washer Caps are applied on hose and tube ends in order to prevent them from sliding over the fittings.
Secure Cover Caps snaps securely into place to protect and conceal the bolt head or nut on point of sale products, furniture, and outdoor equipment. Secure Cover Caps and bases can be mixed and matched in six different colors to create a customized appearance.
Grease Nipple Caps are designed to cover and protect the heads of Grease Nipples. Nipple Caps are a low-cost effective solution that protects against ingress of dust and dirt when not engaged with its mating part. They can also be used for other applications, including Glue Guns. The cap is knurled to assure an easy grip, and it is fitted with a retaining washer to help it stay in place.
Our Nipple Cap offer is made from Red Low Density Polyethylene (LDPE). These LDPE Nipple Caps are easy to use and install; they offer an ideal solution for any grease applicator, by covering the end-tip to prevent overflow and leakage from the substances contained within.
Banjo Bolt caps feature a protection cap and retaining washer all in one unit. Our Banjo Bolt caps hold everything together during assembly, storage, and shipment. Banjo Bolt Caps protect against damage and dirt ingress. They are easy to grip, even when wearing gloves.
Hexagonal caps protect UNF, Metric and BSP hydraulic couplings and fittings. Suitable to protect both hexagonal or round fittings and couplings. Part design includes a central pull-tab for easy removal.
Round Hanger Caps are an attractive cap with a convenient hanger. They are flexible for easy fitting and offer good weather resistance.
Driveshaft Protection caps are used to protect and mask the driveshaft and the bearings surrounding it. They fit DIN748, IEC 600-72, and ISO R775 drive shafts.
Banjo Union plugs prevent damage, dirt, moisture and corrosion during storage and shipping of Banjo Unions. Used on Banjo Union DIN 7642 B/E.
O-Ring Face Seal caps are designed to protect O-Ring face seal connectors used on UNF and JIC hydraulic connections. The OFR series has a longer overall length and includes a molded retaining ring at the bottom that snaps under the connector to keep it securely in place during transit and processing.
Round End caps are designed to protect outside diameters of threaded or non-threaded tubing, pipe and rods. They are available in a wide range of sizes and lengths depending on your application needs. Any part number that has a W/R or AR found in it has an internal molded ring or internal ribs for extra gripping power and superior retention.
Hydraulic Quick Coupling Release Dust caps are suitable to protect quick release couplings series ISO 7241-1 Series A and B. They are designed to remain attached to the hose and offer excellent protection from dirt, moisture and corrosion.
Circular Connector Caps made from Red Low-Density Polyethylene (LDPE). A cost effective cap for a circular connector, they are designed for easy assembly and removal either with automated equipment or by hand.
This range of protective round connector caps is typically used to protect connectors with a standard thread. The range also features caps that can be used for electrical connectors per Military Standard 90376.
Our wide range of Round Vinyl End Caps is made from Polyvinyl Chloride (PVC). The round plastic end caps flexible material can stretch on to larger dimensions for a snug fit without tearing, splitting or shredding.
Vinyl protective caps are typically used to protect threaded or non-threaded tubing, rods, pipe or paper tubes. These round vinyl caps have a glossy and attractive finish that makes them ideal for use as a decorative vinyl pipe end caps.
Our round PVC cap color options include;
Our Square End Caps, also known as Square Tube Caps or Metal Tubing Caps, are designed to fit the most popular sizes of square tubular steel. A Square End Cap is an ideal finishing product for square tubes.
Our Square Caps range is available in Low Density Polyethylene (LDPE) and Acrylonitrile Butadiene Styrene (ABS).
Packaging Tube caps are designed with an internal rib that provides a quick and tight fit on packaging tube containers. Used on packaging tube I.D.'s 1/4" through 1-3/4" with .045" wall thickness.
Unfortunately your session was timed-out due to inactivity. Please login or reload page to continue