Insulating Non Locking

 (95 products)

Need a Quote?

For large volumes and customised products, add to your cart and click request a quote, or email sales@essentracomponents.co.za and we will respond within 2 working days

Filter Products

  • of 4
List Grid

Anti Rotation PCB Supports

In stock - Delivery conditions may apply, visit our FAQs In production

This PCB Support range holds the board by it's edge, minimising the spaced required,. They are available with or without a locking nose to provide extra holding strength.

{0} variants (Filters applied) {0} variants (No filters applied)

Cable Clamps - Adhesive/Screw Mount, Round Wire Saddle

In stock - Delivery conditions may apply, visit our FAQs In production

Gear Spurs are one of the most common type of gears. They are also known as straight-cut gears and can be found in a multitude of applications that require mechanical force transmission.

{0} variants (Filters applied) {0} variants (No filters applied)

Cable Clamps - Plug In, Round Wire Saddle

In stock - Delivery conditions may apply, visit our FAQs In production

Cables slide into wire saddle and are kept in place without the need of a locking mechanism. The snap-in application adds to the ease of installation. The round wire saddle means a wide range of cable diameters are suitable. Available in both UL94 V-2 and UL94 V-0 materials. Available in Natural and Black colours.

{0} variants (Filters applied) {0} variants (No filters applied)

Castor Wheels - Fixed Plate

In stock - Delivery conditions may apply, visit our FAQs In production

Fixed Plate Castor Wheels can be used as a general-purpose caster where full 360-degree rotation is required. The plate has mounting holes to secure the caster to your application while the brake allows for a full stop when engaged.

{0} variants (Filters applied) {0} variants (No filters applied)

Castor Wheels - Levina

In stock - Delivery conditions may apply, visit our FAQs In production

Levina Castor Wheels can be used as a general-purpose caster where full 360-degree rotation is required. The bolt hole in the caster frame allows for secure mounting to bolt threads. Complete your project by selecting from our range of suitable Stem Fittings and Castor Plates.

{0} variants (Filters applied) {0} variants (No filters applied)

Castor Wheels - Linea

In stock - Delivery conditions may apply, visit our FAQs In production

Linea Castor Wheels can be used as a general-purpose caster where full 360-degree rotation is required. The bolt hole in the caster frame allows for secure mounting to bolt threads. Complete your project by selecting from our range of suitable Stem Fittings and Castor Plates.

{0} variants (Filters applied) {0} variants (No filters applied)

Castor Wheels - Multifunctional Levelling

In stock - Delivery conditions may apply, visit our FAQs In production

Castor Wheels - Multifunctional Levelling incorporate the feasibility to move equipment easily with a high-grade nylon wheel. This caster has 360-degree freedom of motion and precision hand leveling adjustment.

{0} variants (Filters applied) {0} variants (No filters applied)

Castor Wheels - Swivel Bolt Hole & Stem with Brake

In stock - Delivery conditions may apply, visit our FAQs In production

Castor Wheels - Swivel Bolt Hole & Stem With Brake can be used as a general-purpose caster where full 360-degree rotation is required. The bolt hole in the caster frame allows for secure mounting to bolt threads.

{0} variants (Filters applied) {0} variants (No filters applied)

Castor Wheels - Swivel Plate

In stock - Delivery conditions may apply, visit our FAQs In production

Castor Wheels - Swivel Plate are most commonly mounted into a socket on wooden or metal tubular legs. These casters push into place, allow 360-degree rotation, and secure into place with brakes.

{0} variants (Filters applied) {0} variants (No filters applied)

Ceramic Insulation Beads

In stock - Delivery conditions may apply, visit our FAQs In production

These ceramic insulation beads are used to cover wires that handle high voltage or high current applications. They can also be used as a non threaded spacer for high powered devices.

{0} variants (Filters applied) {0} variants (No filters applied)

Cupped Base PCB Supports

In stock - Delivery conditions may apply, visit our FAQs In production

This range of PCB supports has a cupped bottom fixture that adds extra stability and covers the fixture. They are available in two locking style tops, bayonet or teardrop.

{0} variants (Filters applied) {0} variants (No filters applied)

Dual Locking Support Pillars

In stock - Delivery conditions may apply, visit our FAQs In production

These spacers lock at both ends. They are availabe in different locking options for both ends and in different body types, making them suitable for a range of needs and application.

{0} variants (Filters applied) {0} variants (No filters applied)

Edge Wire Saddles

In stock - Delivery conditions may apply, visit our FAQs In production

This range of edge wire saddles allows for wires to be fixed to the edge of a panel or in a panel cut-out and comes with locking or non-locking top.

{0} variants (Filters applied) {0} variants (No filters applied)

PCB Corner Edge Locking Supports

In stock - Delivery conditions may apply, visit our FAQs In production

Bundle easily slides in and out. Quickly and easily mounted with an adhesive base. They come in seven different sizes for various bundle diameters. UL94 V-0 rated PVC with an acrylic adhesive.

{0} variants (Filters applied) {0} variants (No filters applied)

PCB Edge Locking Supports - Snap In

In stock - Delivery conditions may apply, visit our FAQs In production

Edge Locking Supports provide a secure hold on the side of the PCB and the snap in fitting and locating nose are ideal for quick assembly. The PCB is easily removed for service.

{0} variants (Filters applied) {0} variants (No filters applied)

PCB Spacer - Domed

In stock - Delivery conditions may apply, visit our FAQs In production

These reverse mount supports re installed from the underside of the chassis. They have a thin buttonhead for minimal protrusion under the chassis. The top of these is a locking arrowhead that holds the PC Board in place.

{0} variants (Filters applied) {0} variants (No filters applied)

PCB Spacer - Push In

In stock - Delivery conditions may apply, visit our FAQs In production

These push-in spacers are designed to support heavily loaded circuit boards. No through hole is required in the board which allows for easy access to the underside of the board. These have a flanged base to keep them steady

{0} variants (Filters applied) {0} variants (No filters applied)

PCB Spacer - Push In/Metric

In stock - Delivery conditions may apply, visit our FAQs In production

These push-in spacers are designed to support heavily loaded circuit boards. No through hole is required in the board which allows for easy access to the underside of the board. These have a flanged base to keep them steady

{0} variants (Filters applied) {0} variants (No filters applied)

PCB Spacer - Push In/Teardrop

In stock - Delivery conditions may apply, visit our FAQs In production

These push-in spacers are designed to support heavily loaded circuit boards. No through hole is required in the board which allows for easy access to the underside of the board. These have a flanged base to keep them steady

{0} variants (Filters applied) {0} variants (No filters applied)

PCB Spacer - Push In/Wide Base

In stock - Delivery conditions may apply, visit our FAQs In production

These push-in spacers are designed to support heavily loaded circuit boards. No through hole is required in the board which allows for easy access to the underside of the board. These have a flanged base to keep them steady.

{0} variants (Filters applied) {0} variants (No filters applied)

PCB Spacer - Snap Fit

In stock - Delivery conditions may apply, visit our FAQs In production

These push spacers are designed to support heavily loaded circuit boards. No through hole is required in the board which allows for easy access to the underside of the board. These have a flanged base to keep them steady

{0} variants (Filters applied) {0} variants (No filters applied)

PCB Spacers - Screw Fastened

In stock - Delivery conditions may apply, visit our FAQs In production

These spacers have a threaded female end that is mounted securely using a screw. The top end has a locking arrowhead nose that holds the PCB in place.

{0} variants (Filters applied) {0} variants (No filters applied)

PCB Standoffs - Hexagonal Bottom /Metric Threaded/Insulator/Nylon & Brass

In stock - Delivery conditions may apply, visit our FAQs In production

These Female to Female Standoffs are designed to be installed by hand and do not require assembly equipment. The hex standoffs are suitable for a wide range of applications and are ideal for use when high mechanical strength is required and provide sturdy, insulated spacing for high power electronic applications. They are made of nylon with brass inserts and are rated UL94 V-2.

{0} variants (Filters applied) {0} variants (No filters applied)

PCB Standoffs - Hexagonal Bottom/Insulator/Nylon & Brass

In stock - Delivery conditions may apply, visit our FAQs In production

These Male Standoffs are designed to be installed by hand and do not require assembly equipment. The hex standoffs are suitable for a wide range of applications and are ideal for use when high mechanical strength is required and provide sturdy, insulated spacing for high power electronic applications. They are made of nylon with brass inserts and are rated UL94 V-2.

{0} variants (Filters applied) {0} variants (No filters applied)

PCB Standoffs - Hexagonal/Imperial Threaded /Self Tapping/PVC

In stock - Delivery conditions may apply, visit our FAQs In production

These are female standoffs that have a through hole. A self-tapping screw is used to thread the plastic which gives it a strong hold. Available for several different screw sizes in many spacer lengths.

{0} variants (Filters applied) {0} variants (No filters applied)
  • of 4