Plastic Hydraulic Application Caps & Plugs

Banjo Union plugs prevent damage, dirt, moisture and corrosion during storage and shipping of Banjo Unions. Used on Banjo Union DIN 7642 B/E.

Flanged caps are designed to protect threaded connectors or fittings but are used to fit both threaded or round surfaces. You can assemble or remove these caps by hand or automated equipment.

O-Ring Face Seal caps are designed to protect O-Ring face seal connectors used on UNF and JIC hydraulic connections. The OFR series has a longer overall length and includes a molded retaining ring at the bottom that snaps under the connector to keep it securely in place during transit and processing.

Pull-Tab caps have a curved pull-tab design that provides more surface contact area, requiring less gripping force during installation and removal. The PVC material is flexible so it can stretch onto slightly larger dimensions for a snug fit without tearing, splitting or shredding.

Push-In Barrel plugs are general-purpose plugs built to cover and close a hole. These can be applied or removed quickly and have convexed sides designed to ensure a secure fit.

Round End caps are designed to protect outside diameters of threaded or non-threaded tubing, pipe and rods. They are available in a wide range of sizes and lengths depending on your application needs. Any part number that has a W/R or AR found in it has an internal molded ring or internal ribs for extra gripping power and superior retention.

Vinyl Round End caps are designed to protect outside diameters of threaded or non-threaded tubing, rods, pipe or paper tubes. The vinyl (PVC) material can stretch onto larger dimensions for a tight fit without tearing, splitting or shredding. The glossy and attractive finish makes this cap ideal for use as a decorative end cap.

Standard Tapered Caps & Plugs are designed for each part to cap multiple O.D.’s or plug multiple I.D.’s. The durable material protects against damage, dirt, moisture and corrosion during storage and shipping.

The Wide Flange tapered cap & plug design gives this part added protection on bearing surfaces and keeps the plug from being accidently pushed down through the hole in the mating part. Provides protection from damage, dirt, moisture and corrision during storage and transportation.

Tear-Tab caps are designed with a tear-tab to remove the cap from the part. By pulling the tab, the cap will split wide open for easy removal. The range is suitable for UNF, SAE, JIC, NPT, BSP and Metric threads.