Cable Clamps - Dual Half U, Snap-In
Low profile for use on densely packed boards or other limited space applications; Useful for routing two parallel wire bundles; Quickly snaps into a .125 in hole in a 1/16 in panel; UL-recognized under #E71558. Available in three different sizes to hold bundles of 1/8 in, 3/16 in and 1/4 in; UL94 V-2 Nylon 6/6, Natural color.
Cable Clamps - Fir Tree Mount, Wire Harness Clip
Pushed into a hole using a standard 6mm hexagonal socket pressed onto the mounting head. Cables are easily inserted into clamp where they are locked into place. Wires can also be removed for changes or replacements.
Cable Clamps - Stud Mount, Wire Harness Clip
Cable Clamps provide a secure yet simple fastening and are an ideal cable management solution for a variety of applications. The Stud Mount Clamp is mounted by the part being pushed onto a stud or screw to provide a secure fastening
Flat Cable Clamp - Adhesive Mount, Hinged, No Tension
For flat or ribbon cables Flat Cable Clamps are ideal and the adhesive mount clamps offer a secure fastening with a simple installation thanks to the adhesive base. These clamps are hinged for quick access
Cable Clamps - Dual Half U, Screw Mount
Low profile for use on densely packed boards or other limited space applications. Useful for routing two parallel wire bundles. .125 in Hole in center for a #4 or M3 screw. Available in three different sizes to hold bundles of 1/8 in, 3/16 in and 1/4 in. UL94 V-2 Nylon 6/6, Natural color.
Cable Clamps - Half U, Screw Mount
Low profile for use on densely packed boards or other limited space applciations; Good for mounting bundles in corners or along edges.; Mount with a #4 or M3 screw and provide exceptional retention strength; Available in three sizes for bundle diameters 1/8 in, 3/16 in or 1/4 in;
Cable Clamps - Adhesive Mount, J-Style
These cable clamps are available in two mounting methods; fir-tree mount and arrowhead mount. They are also available with various spacer lengths to hold the cables off of the board. They have a cupped base that adds stability as well as covering the hole completely. The cables are inserted through the side of the clamp for where space is an issue.
Cable Clamps - Plug-In, Adjustable
Ratcheting clip grips the bundle securely. Adjustable for a wide range of bundle diameters. While locking the bundle in, it will reopen for routing changes. Good for high vibration applications. Once the clip is closed it will not open until the tab is released. Available in either UL94 V-2 or UL94 V-0 material.
Cable Clamps - Capacitor Holder/Nylon
Standing capacitor holders are designed to screw-mount to the chassis. Strong, one-piece constructed products. Available with or without mounting hardware. Available with a standoff feature internally to space the capacitor from the chassis. Also available without the standoff feature for pass-through applications.
Standoff - Lock Clip/Style 2
Cable Clamps provide a secure yet simple fastening and are an ideal cable management solution for a variety of applications. The plug-in application adds to the ease of installation and the locking clip adds a level of security
Cable Clamps - Adhesive Mount, Single-Wire
Cable Clamps provide a secure yet simple fastening and are an ideal cable management solution for a variety of applications. The adhesive mount is a very secure yet removable application
Flat Cable Clamp - Snap-In, Hinged, No Tension
Snap-in, Hinged, No Tension Flat Cable Clamps are easy to install due to their push-in application feature. The hinge and no tensions aspects ensure the cables will sit tidily without being strained by the clamp
Flat Cable Clamp - Screw & Adhesive Mount, with Tension
Flat Cable Clamps are simple to use and install. They have an adhesive base to aid the ease of installation and there is an alternative screw mount option. These clamps have additional tension which provides a strong clamp on a flat cable
Cable Clamps - P Style/Screw Mount/Nylon/Natural
Bundles are securely sored in these nylon clmaps. Many bundle diameters. Black and Natural colors. UL94 V-2 and UL94 V-0 rated material. Different mounting holes for different screw sizes.
Cable Clamps - SHR Clips
SHR clips are designed to hold the size 20 and 25 Essentra Slit Harness Wrap (SHR Series). 4 different mounting types; snap-lock into either a round or square hole (to prevent rotation), screw mount and adhesive mount. Internal rib that grips the wrap. Releasable latch that allows for maintenance. Black, UL94 V-2 Nylon 6/6.