Snap On Fibre Optic Cable Management

 (25 products)

Need a Quote?

For large volumes and customised products, add to your cart and click request a quote, or email sales@essentracomponents.co.za and we will respond within 2 working days

Filter Products

List Grid

Fibre Bend Limiting Tubing - Clips, Hinged Top Lock

In stock - Delivery conditions may apply, visit our FAQs In production

Fibre Bend Limiting Tubing Clips are snap fitting for easy installation and allow the running of Fibre Bend Limiting Tubing along a panel, enclosure or racking unit. They are hinge fitted which also aids the ease of installation and removal

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Bend Limiting Tubing - Clips, Slotted

In stock - Delivery conditions may apply, visit our FAQs In production

Optical Fibre Slotted Multi Brackets are designed using Miniflex technology. They are used at distribution points where orderly fibre management, protection and strain relief are required. An additional security feature allows fitting of a cable tie around the part which prevents removal of any retained tubes. They will hold a maximum of 12 tubes

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Bend Limiting Tubing - Clips, Snap in

In stock - Delivery conditions may apply, visit our FAQs In production

Fibre Bend Limiting Tubing can be mounted using saddles such as the Snap in Clips. These are simple to install and come in two different types

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Bend Limiting Tubing - Clips, Standoff

In stock - Delivery conditions may apply, visit our FAQs In production

Fibre Bend Limiting Tubing can be mounted using Tube and Pip Clips such as the Standoff Clips. These are simple to install and come in two different material types

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Bracket - Coiling Clip

In stock - Delivery conditions may apply, visit our FAQs In production

The optical Fibre spool is made of two extruded clips that snap into each other to form a clip with a smooth, curved surface to accommodate fibre optic bundles.

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Clips - 16 Slot - 3.9mm, 3.4mm, 2.9mm

In stock - Delivery conditions may apply, visit our FAQs In production

16 Slot Fibre Clips are designed to hold six 3.4mm, 3.9mm or 2.9mm diameter fibres. They can form a part of the larger EFA04 18 fibre clip which can be broken down to form individual clips which provides plenty of versatility

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Clips - 16 Slot - 3mm, 2mm

In stock - Delivery conditions may apply, visit our FAQs In production

16 Way Fibre Clip can be broken apart to form 3 individual clips holding 4, 4 and 8 components. A broken apart 4-way can be used in the Splice Tray EFA04 25 001

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Clips - 2 Slot - 6mm, 5.5mm, 4.5mm

In stock - Delivery conditions may apply, visit our FAQs In production

2 Slot Fibre Clips are designed for use in the Array Tray EFA04-25-001. They can be screw mounted or mounted with self adhesive pads. They act as an Isolator Clip

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Clips - 24 Slot, Splice Holder

In stock - Delivery conditions may apply, visit our FAQs In production

24-Way Splice Holders are designed to hold up to 24 Splices or components and come with a range of mounting options; either adhesive mounting, no adhesive or screw mount

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Clips - 3 & 5 Slot, 6 & 9 Cables, 2mm, Snap In

In stock - Delivery conditions may apply, visit our FAQs In production

The Fibre Management range supports Optical Fibre Brackets which are snap-in for an ease of installation. Both 3 and 5 slot mounting brackets are available

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Clips - 3 Slot - 3mm

In stock - Delivery conditions may apply, visit our FAQs In production

3 Slot Fibre Clips are designed to hold three 3mm diameter fibres or other components such as couplers, splice protectors or WDM's

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Clips - 4 Slot - 3.9mm

In stock - Delivery conditions may apply, visit our FAQs In production

4 Slot Fibre Clips are designed to hold four 3.9mm diameter fibres. They can form a part of the larger EFA04 18 fibre clip which can be broken down to form individual clips which provides plenty of versatility

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Clips - 4 Slot, 8 Cables, 3mm, Snap In

In stock - Delivery conditions may apply, visit our FAQs In production

The Fibre Management range supports Optical Fibre Brackets which are plug-in for an ease of installation. They are 4 slot but will hold 8 cable of 3mm diameter and have an anti-rotation pin which prevents fibre kinking due to the bracket turning in the mounting hole

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Clips - 6 Slot - 3.4mm, 2.9mm

In stock - Delivery conditions may apply, visit our FAQs In production

6 Slot Fibre Clips are designed to hold six 3.4mm or 2.9mm diameter fibres. They can form a part of the larger EFA04 18 fibre clip which can be broken down to form individual clips which provides plenty of versatility

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Clips - 6 or 12 Slot, 3mm or 1.2mm,Splice Holder

In stock - Delivery conditions may apply, visit our FAQs In production

Splice Holders are designed to hold up to 6 x 3mm Fibre or components such as couplers, splice protectors and WDM's. The OFSH-T Splice Holders can be used with OFST series splice trays

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Cutout Adapters

In stock - Delivery conditions may apply, visit our FAQs In production

Fibre Cut-out Adapters convert a hole cut-out for an SC connector into a hole cut-out for an ST connector. The Optical Fibre Duplexer enables cable with aramid strands to be broken out and mechanically terminated.

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Guides - Corner, Snap Together

In stock - Delivery conditions may apply, visit our FAQs In production

The Fibre Management range supports many low profile fibre reels for spooling excess fibre onto a PCB board. Some reels can be broken apart to form a controlled bend around a 90 or 180 degree turn. The range also offers stacking pillars and stand-offs which can be used to stack multiple reels for compact spooling of multiple runs of fibre. Optical Fibre Segments can be assembled for bend control around a 180 degree turn when reeling optical fibre. In a four-piece assembled mode approximately 60m of 900 micron fibre can be stored

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Guides - Flexible

In stock - Delivery conditions may apply, visit our FAQs In production

The Fibre Management range supports many low profile fibre reels for spooling excess fibre onto a PCB board. Some reels can be broken apart to form a controlled bend around a 90 or 180 degree turn. The range also offers stacking pillars and stand-offs which can be used to stack multiple reels for compact spooling of multiple runs of fibre. Fibre Guides are used to assist with reeling and Optical Flexible Fibre Guide Systems are used with 250 and 900 micron fibres. The Fibre can enter and exit at any point without risk of the fibre snagging or kinking

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Guides - Flexible Spacers & Holders

In stock - Delivery conditions may apply, visit our FAQs In production

The Fibre Management range supports many low profile fibre reels for spooling excess fibre onto a PCB board. Some reels can be broken apart to form a controlled bend around a 90 or 180 degree turn. The range also offers stacking pillars and stand-offs which can be used to stack multiple reels for compact spooling of multiple runs of fibre. Fibre Guides are used to assist with reeling and Optical Flexible Fibre Guide Systems are used with 250 and 900 micron fibres. The Fibre can enter and exit at any point without risk of the fibre snagging or kinking

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Reels

In stock - Delivery conditions may apply, visit our FAQs In production

The Fibre Management range supports many low profile fibre reels for spooling excess fibre onto a PCB board. Some reels can be broken apart to form a controlled bend around a 90 or 180 degree turn.

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Splice Trays - System, Hinges

In stock - Delivery conditions may apply, visit our FAQs In production

Fibre Splice Trays & Protectors are ideal for eliminating the potential hazard of macro and micro bends which can occur during the mishandling of optical fibres. The trays are stackable to any number and inter-tray fibre routing is possible. They can be used with splice holders, splice protectors and bend limiting tubing. The lids, trays and hinges are all sold separately or in a kit: OFST-A-P-1. OFSTH colour coded hinges indicate the side of the tray to open from

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Splice Trays - System, Kit

In stock - Delivery conditions may apply, visit our FAQs In production

Fibre Splice Trays & Protectors are ideal for eliminating the potential hazard of macro and micro bends which can occur during the mishandling of optical fibres. The trays are stackable to any number and inter-tray fibre routing is possible. They can be used with splice holders, splice protectors and bend limiting tubing. The lids, trays and hinges are all sold separately or in a kit: OFST-A-P-1

{0} variants (Filters applied) {0} variants (No filters applied)

Fibre Splice Trays - System, Lid

In stock - Delivery conditions may apply, visit our FAQs In production

Fibre Splice Trays & Protectors are ideal for eliminating the potential hazard of macro and micro bends which can occur during the mishandling of optical fibres. The trays are stackable to any number and inter-tray fibre routing is possible. They can be used with splice holders, splice protectors and bend limiting tubing. The lids, trays and hinges are all sold separately or in a kit: OFST-A-P-1

{0} variants (Filters applied) {0} variants (No filters applied)

Wire Saddle - Optical Fibre

In stock - Delivery conditions may apply, visit our FAQs In production

The wire saddles are suitable for fibre wires and protecting their delicate nature.

{0} variants (Filters applied) {0} variants (No filters applied)

Wire Saddle - Optical Fibre, Mini

In stock - Delivery conditions may apply, visit our FAQs In production

The micro wire saddles are suitable for fibre wires and protecting their delicate nature.

{0} variants (Filters applied) {0} variants (No filters applied)