LDPE End Caps

Snap-on Bolt and Nut Protection Caps are supplied in a variety of sizes to suit your application. These standard caps protect washers, as well as bolts and nuts. Our LDPE option features an extendable head that is suitable for large studs and helps protect against weathering and tampering, while providing more of a finished appearance and is available in a choice of colour options. Our brown PEEK option is a lightweight but tough alternate, giving them excellent mechanical, steam and boiling water resistance.Customers that purchase our snap-on bolt and nut protection caps regularly buy our Hexagonal Head Screws too.

Flanged Caps are designed to protect the thread of studs. They are used throughout the automotive and engineering industries for general protection uses. The flanges on the profiles have different sizes allowing a socket wrench to function without removing the protection. We offer a selection of materials, including; LDPE, TPR, PVC and Silicone. Our range also includes colour options; Natural, Red and Black and wide choice of sizes to suit your application needs.

These Pull-Tab Flexible Caps are easy to fit and uninstall on threaded or non-threaded alike, for high temperature applications of up to 210 degrees. The unique design allows each cap to fit a range of diameters and the curved pull tab provides more surface contact area, requiring less gripping force during application and removal. Our caps are available in Silver Low-Density Polyethylene or Yellow PVC, and suitable to fit Metric, UNF and BSP thread sizes.

These Yellow Low-Density Polyethylene Gas Cylinder Valve Caps are developed in conjunction with major European gas companies. They protect industrial gas valves from ingress of dust and dirt. They are tamper evident, reducing potential risks. There is variation in the design with a vent flat to allow safe release of gas. Our range is available in a selection of sizes to suit your application requirements.

Our Non-threaded End Caps are available in wide selection of sizes and are made from Low-Density Polyethylene, in blue. They are ideal for protecting threaded or non-threaded tubing, pipes and rods. Standard, short and long caps are available. The short versions are for general purpose closure and the long versions have an extra depth and feathered edge which ensure a tight fit. The design of these longer caps helps to prevent accidental displacement.

Protection plugs for fuel system quick fit connectors, Ring tab allows an easy removal and cover the connector wall when fitted.

Standard Round End Caps are non-threaded and available in a wide range of sizes. They are ideal for protecting threaded or non-threaded tubing, pipes and rods. Standard, short and long caps are available. The short versions are for general purpose closure and the long versions have an extra depth and feathered edge which ensure a tight fit. The design of these longer caps helps to prevent accidental displacement. All are available in a wide range of sizes

Standard round feet ferrules, sometimes referred to as end tips offer protection to tubes, rods and occasionally threads. The ferrules offer protection to the shaft or tube to ensure it doesn’t split when meeting hard surfaces as well as providing floor protection and grip in walk aiding applications. Available in either PVC or LDPE offering differing softness of product for different applications. The ferrules are also available in red, black, white or natural as to match the aesthetics of their application. You may also be interested in our Round Tube Inserts & Round Threaded Inserts.

Snap Fit Plugs have a single turn providing tight fit once pushed into position. The plug is design with a centre tab to allow a strong grip for tightening and easy removal. The range is suitable for Metric, BSP and UNF threads.

These Black Low-Density Polyethylene Square Ferrules provide a neat cover to square shaped tube inserts, SQR, LSQR and SIG series parts. They can be used for finishing, protection and are essentially applied to cover sharp tube edges.

These LDPE Tear Tab Caps are a rapid solution to fit and remove from the part. By pulling the tab, the cap splits wide open offering an easy solution to numerous applications. The range is suitable to UNF and NPT threads and is available in Natural, Blue and Yellow colours. We offer a wide range of sizes to suit many application needs.

These Polyethylene Threaded Protection Caps are used throughout the automotive, fluid power and engineering industries. They protect threaded components from dust, moisture and damage. They are suitable for Metric threads. Our range is available in Yellow or Red and a wide choice of sizes, to suit your application needs.

These Polyethylene Threaded Protection Caps are used throughout the automotive, fluid power and engineering industries. They protect threaded components from dust, moisture and damage. They is suitable for UNF/JIC threads. Our range is available in Yellow or Red and a wide choice of sizes, to suit your application needs. You may also be interested in our range of Metric Threaded Caps.

Threaded Protection Plugs - BSP/Gas Threads are widely used in hydraulic, pneumatic and general engineering industries. They come with a knurled head to easily grip the head and they offer an excellent protection from dirt, moisture and corrosion. They are available in UNF, NPT, Metric and BSP/Gas threads.

Threaded Protection Plugs - Metric Threads are widely used in hydraulic, pneumatic and general engineering industries. They come with a knurled head to easily grip the head and they offer an excellent protection from dirt, moisture and corrosion. They are available in UNF, NPT, Metric and BSP/Gas threads.

Threaded Protection Plugs - Quick Fit are widely used in hydraulic, pneumatic and general engineering industries. They come with a knurled head to easily grip the head and the short thread allows a quick fit on the part. Suitable for Metric, BSP and UNF thread sizes.

Threaded Protection Plugs - UNF Threads are widely used in hydraulic, pneumatic and general engineering industries. They come with a knurled head to easily grip the head and they offer an excellent protection from dirt, moisture and corrosion. They are suitable for UNF threads.