PCB Mounting Pillars

We found 64 product types for Double Sided Mounting PCB Mounting Pillars

Need a Quote?

For large volumes and customised products, add to your cart and click request a quote, or email sales@essentracomponents.co.za and we will respond within 2 working days

Filter Products

  • of 3
List Grid

PCB Spacer - Push In/Metric

In stock - Delivery conditions may apply, visit our FAQs In production

These push-in spacers are designed to support heavily loaded circuit boards. No through hole is required in the board which allows for easy access to the underside of the board. These have a flanged base to keep them steady

{0} variants (Filters applied) {0} variants (No filters applied)

PCB Support Pillars - Dual Locking/Teardrop/Teardrop Natural Nylon

In stock - Delivery conditions may apply, visit our FAQs In production

These PCB support pillars have a locking teardrop design. These snap into very small holes and leave a very low protrusion over the panel. Available in many sizes and styles

{0} variants (Filters applied) {0} variants (No filters applied)

Self Adhesive PCB Support Pillars - Snap Locking/Low Profile

In stock - Delivery conditions may apply, visit our FAQs In production

Adhesive Base Supports come with a double sided adhesive tape with a release tab for quick installation and the snap-locking types are ideal for quick installation with a low profile option for space saving capabilities

{0} variants (Filters applied) {0} variants (No filters applied)

PCB Support Pillars - Snap In/Anti Rotation/No Nose

In stock - Delivery conditions may apply, visit our FAQs In production

These are edge locking supports that require no hole in the top board. They have an integrated locking pin on the bottom to prevent rotation. The UBM grips the PC Board on the side and the UBMC grips the board and is easily released. They have a wide base that minimizes rocking.

{0} variants (Filters applied) {0} variants (No filters applied)

PCB Support Pillars - Rivet Locking/Two Prong

In stock - Delivery conditions may apply, visit our FAQs In production

These innovative spacers are mounted to the panel with a rivet that is designed into the part. As you push the head of the spacer down, the legs expand locking it into place. They are available in 13 metric spacer lengths in a UL94 V-2 rated nylon.

{0} variants (Filters applied) {0} variants (No filters applied)

PCB Support Pillars - Arrowhead Snap Lock/Bayonet Nose Snap Lock/Flexible

In stock - Delivery conditions may apply, visit our FAQs In production

These spacers are thin, flexible spacers. This allows them to be flexed back after the PCB is installed for maintenance or repair

{0} variants (Filters applied) {0} variants (No filters applied)

PCB Support Pillars - Flat Rest Mount/Locking Arrowhead/Cushioned

In stock - Delivery conditions may apply, visit our FAQs In production

These push spacers have a flexible "spring" spacer that absorbs vibration and shock. They mount to the chassis to support the PC board.

{0} variants (Filters applied) {0} variants (No filters applied)

PCB Support Pillars - For Key Hole/Bayonet Nose

In stock - Delivery conditions may apply, visit our FAQs In production

These spacers have a keyslot design that allows for easy removal to facilitate removal. The keyslot design leaves minimal protrusion below the board. The larger base on the keyslot side is for easy identification of mounting end

{0} variants (Filters applied) {0} variants (No filters applied)

PCB Support Pillars - Two Prong Snap Lock/Bayonet Nose Snap Fit

In stock - Delivery conditions may apply, visit our FAQs In production

The standard snap lock support is ideal for quick assembly in PCB stacking applications and the snap lock and snap fit features add a secure hold and an ease of application

{0} variants (Filters applied) {0} variants (No filters applied)

PCB Support Pillars - Two Prong Snap Lock Large Base/Two Prong Snap Fit

In stock - Delivery conditions may apply, visit our FAQs In production

These spacers are mounted on both sides with a low profile two prong fixing. One side is locking and the other is a releasable snap fit. They have a shoulder at the base for locating purposes to facilitate automated assemble. These come in several styles and spacers

{0} variants (Filters applied) {0} variants (No filters applied)

PCB Support Pillars - Arrowhead Snap Lock/Arrowhead Snap Lock/No Tension Wings

In stock - Delivery conditions may apply, visit our FAQs In production

These spacers have a locking arrowhead design. Both ends of these supports are locking. Available in several sizes and style for different spacers, hole sizes and panel thicknesses

{0} variants (Filters applied) {0} variants (No filters applied)

PCB Support Pillars - Two Prong Snap Lock/Two Prong Snap Lock/Spring

In stock - Delivery conditions may apply, visit our FAQs In production

These unique supports act as a spring the the pin is inserted into the spacer. The part flexes and can provide continuous support to the PCB

{0} variants (Filters applied) {0} variants (No filters applied)

PCB Spacers - Hexagonal/Self Tapping

In stock - Delivery conditions may apply, visit our FAQs In production

These PCB Spacers are designed to be installed by hand and do not require assembly equipment. They are simple to install thanks to their screw in design. These Hexagonal Brass Standoffs are suitable for a wide range of applications and are available in both non-undercut and undercut versions. Non-undercut spacers offer greater stability but require a washer for installation. Undercut spacers are much quicker to install and don't require the use of a washer

{0} variants (Filters applied) {0} variants (No filters applied)

PCB Standoffs - Hexagonal/Imperial Threaded /Self Tapping/PVC

In stock - Delivery conditions may apply, visit our FAQs In production

These are female standoffs that have a through hole. A self-tapping screw is used to thread the plastic which gives it a strong hold. Available for several different screw sizes in many spacer lengths.

{0} variants (Filters applied) {0} variants (No filters applied)

PCB Standoffs - Round/Insulator/Nylon & Brass

In stock - Delivery conditions may apply, visit our FAQs In production

These Male / Female Standoffs are designed to be installed by hand and do not require assembly equipment. The round standoffs are suitable for a wide range of applications and are ideal for use when high mechanical strength is required and provide sturdy, insulated spacing for high power electronic applications. They are made of nylon with brass inserts and are rated UL94 V-2.

{0} variants (Filters applied) {0} variants (No filters applied)

PCB Standoffs - Hexagonal/Metal

In stock - Delivery conditions may apply, visit our FAQs In production

The male to male standoffs are designed to be installed by hand and do not require assembly equipment. The hexagonal metric standoffs are suitable for a wide range of applications.

{0} variants (Filters applied) {0} variants (No filters applied)

PCB Support Pillars - Dual Locking/Bayonet/Arrowhead Black PES

In stock - Delivery conditions may apply, visit our FAQs In production

These support pillars are our most popular style. Both ends easily snap in by hand and lock into place. Available in many different styles for different spacer lengths, hole diameters, panel thicknesses and materials

{0} variants (Filters applied) {0} variants (No filters applied)

PCB Support Post - Dual Locking/Mini

In stock - Delivery conditions may apply, visit our FAQs In production

These spacers have a locking teardrop design. These snap into very small holes and leave a very low protrusion over the panel. Available in many sizes and styles

{0} variants (Filters applied) {0} variants (No filters applied)

PCB Support Pillars - Edge Locking Screw Mount/Long Nose

In stock - Delivery conditions may apply, visit our FAQs In production

Edge Locking Supports provide a secure hold on the side of the PCB allowing for easy removal. Screw mount supports are very secure and reliable. These mount with a self-tapping screw.

{0} variants (Filters applied) {0} variants (No filters applied)

PCB Support Pillars - Snap In/Anti Rotation/Locating Nose/Solid

In stock - Delivery conditions may apply, visit our FAQs In production

Edge Locking Supports provide a secure hold on the side of the PCB and the snap in fitting and locating nose are ideal for quick assembly

{0} variants (Filters applied) {0} variants (No filters applied)

PCB Support Pillars - Rivet Locking/Boyonet Nose

In stock - Delivery conditions may apply, visit our FAQs In production

Designed to mount easily on chassis with plastic SR snap rivet. Allows mounting to a range of panel thicknesses, up to .341” thick. Button head on rivet for minimal protrusion on chassis underside

{0} variants (Filters applied) {0} variants (No filters applied)

PCB Support Pillars - Two Prong Snap Lock/Bayonet Nose Snap Lock

In stock - Delivery conditions may apply, visit our FAQs In production

These spacers are locking on both ends. They are availabe in two different styles and many spacer options

{0} variants (Filters applied) {0} variants (No filters applied)

PCB Spacer - Snap Fit

In stock - Delivery conditions may apply, visit our FAQs In production

These push spacers are designed to support heavily loaded circuit boards. No through hole is required in the board which allows for easy access to the underside of the board. These have a flanged base to keep them steady

{0} variants (Filters applied) {0} variants (No filters applied)

PCB Support Pillars - Stacking

In stock - Delivery conditions may apply, visit our FAQs In production

These spacers snap together on top of each other to stack any number of boards. Item MB-1-156 Can top off the stack

{0} variants (Filters applied) {0} variants (No filters applied)

PCB Support Pillars - Touch Control

In stock - Delivery conditions may apply, visit our FAQs In production

The standard snap lock support is ideal for quick assembly in PCB stacking applications

{0} variants (Filters applied) {0} variants (No filters applied)
  • of 3