Threaded Protection Plugs - NPT Threads
Threaded Protection Plugs are made of nylon or HDPE to guard NPT Threads from contaminants and moisture during production and shipment. The easy to grip head design makes for efficient application and removal by hand or hand tool.
Threaded Protection Plugs - Quick Fit
Threaded Protection Plugs - Quick Fit are widely used in hydraulic, pneumatic and general engineering industries. They come with a knurled head to easily grip the head and the short thread allows a quick fit on the part. Suitable for Metric, BSP and UNF thread sizes.
Threaded Protection Plugs - BSP/Gas Threads
Threaded Protection Plugs - BSP/Gas Threads are widely used in hydraulic, pneumatic and general engineering industries. They come with a knurled head to easily grip the head and they offer an excellent protection from dirt, moisture and corrosion. They are suitable for BSP/Gas threads.
Pull Tab Caps
Our Vinyl Pull Tab Caps have a large pull tab allowing easy removal from the component. The PVC or EVA material used for these ranges provide good tensile strength, toughness and increased flexibility. Our range includes colour options; Black, Red and Yellow, with a wide choice of sizes to suit your application needs.
Tear Tab Caps
These LDPE Tear Tab Caps are a rapid solution to fit and remove from the part. By pulling the tab, the cap splits wide open offering an easy solution to numerous applications. The range is suitable to UNF and NPT threads and is available in Natural, Blue and Yellow colours. We offer a wide range of sizes to suit many application needs.
Threaded Sealing Caps - BSP/Gas Threads
HDPE Threaded Sealing Caps are used throughout the automotive, fluid power and engineering industries. They are recommended to be tightened by hand although the hexagonal head enables the cap to be applied or removed by spanner or socket at a low torque. The cap is fitted with an internal neoprene rubber sealing disk to limit fluid leakage. Suitable for BSP/Gas threads. Our range is supplied in Yellow, with lots of size options available.
Threaded Protection Caps - BSP/Gas Threads
These Polyethylene Threaded Protection Caps are used throughout the automotive, fluid power and engineering industries. They protect threaded components from dust, moisture and damage. They are suitable for BSP/Gas threads. Our range is available in Yellow or Red and a wide choice of sizes, to suit your application needs.
Snap Fit Plugs
Snap Fit Plugs have a single turn providing tight fit once pushed into position. The plug is design with a centre tab to allow a strong grip for tightening and easy removal. The range is suitable for Metric, BSP and UNF threads.
Slottex Plugs are screw on protection plugs that can be applied or removed with screwdriver, spanner or socket. They can be tightened manually or with power tool. The range cover a large offering of dimensions suitable for Metric threads, BSP threads and UNF threads.
Threaded O-ring Plugs - BSP/Gas Threads
Threaded O-ring Plugs - BSP/Gas Threads can be applied or removed by hand, hex wrench or screwdriver. The O-ring provides a water tight seal for superior leakage protection.
Round Vinyl End Caps
These Push-fit Round Vinyl End Caps are made from flexible PVC and can stretch on to larger dimensions for a snug fit without tearing, splitting, or shredding. The glossy and attractive finish makes this cap ideal for use as a decorative end cap. Our range is offered in Black or Red colour options.
Hexagonal Caps are used to protect all common hydraulic coupling sizes. The design is suitable for protecting round components too and are fitted with a central tab for easy removal. They are suitable for Metric, BSP and UNF sizes. Our Hexagonal Caps range are made from Polyethylene and come in a Natural finish.