Retaining Washers

In stock

A Plastic Retaining Washer is primarily used to hold screws and bolts in place during assembly and have a design that grips the outside of screw or bolt shank. Also known as an Anti Loss Washer, they provide insulation, cushioning and spacing. They help insulate fastening assemblies from moisture and electricity.

This washer range includes options with internal and external teeth with a tapered design. The washer easily slides on to the screw (or bolt) and is retained by the screw once assembled. The washer cold forms and fully enters the pitch of the screw to provide sealing.

These washers allow for preliminary mounting of the screw (or bolt) before securing with a nut. They are ideal when pre-assembly of the screw and washer is required. They also help reduce assembly time and cost.

The range includes material options that provide corrosion, abrasion and chemical resistance.

Materials: Polycarbonate (PC), Polyamide 6.6 (PA) and High Density Polyethylene (HDPE)
Colour: Natural

Print page

Request a quote

For large volumes and customised products, add to your cart and click request a quote, orcontact usand we will respond within 2 working days.

140 results

Sort by

None

Product SKUs information
Price range	Availability	Material	Inside Diameter	Outside Diameter	Thickness
R 5,1524 - R 6,361	Request the lead time here	Nylon 6/6		1.260 in 32 mm	0.062 in 1.6 mm

R 2,8148 - R 3,4749	Request the lead time here	Nylon 6/6		1.125 in 28.6 mm	0.032 in 0.8 mm

R 0,7316 - R 0,8853	Request the lead time here	Nylon 6/6		0.734 in 18.6 mm	0.062 in 1.6 mm

R 1,7521 - R 2,1631	Request the lead time here	Nylon 6/6		1.125 in 28.6 mm	0.062 in 1.6 mm

R 0,7552 - R 1,1321	Request the lead time here	Nylon 6/6		0.400 in 10.2 mm	0.055 in 1.4 mm

R 0,7837 - R 0,9677	Request the lead time here	Nylon 6/6		0.630 in 16 mm	0.062 in 1.6 mm

R 4,0414 - R 4,9892	Request the lead time here	Nylon 6/6		1.500 in 38.1 mm	0.062 in 1.6 mm

R 0,6779 - R 0,837	Request the lead time here	Nylon 6/6		0.734 in 18.6 mm	0.062 in 1.6 mm

R 0,6993 - R 0,8634	Request the lead time here	Nylon 6/6		0.266 in 6.8 mm	0.125 in 3.2 mm

R 1,9842 - R 2,4497	Request the lead time here	Nylon 6/6		1.000 in 25.4 mm	0.062 in 1.6 mm

R 0,6399 - R 0,7899	Request the lead time here	Nylon 6/6		0.453 in 11.5 mm	0.045 in 1.1 mm

R 0,7078 - R 0,8736	Request the lead time here	Nylon 6/6		0.750 in 19.1 mm	0.062 in 1.6 mm

R 0,468 - R 0,5777	Request the lead time here	Nylon 6/6		0.328 in 8.3 mm	0.032 in 0.8 mm

R 0,339 - R 0,4184	Request the lead time here	Nylon 6/6		0.203 in 5.2 mm	0.062 in 1.6 mm

R 0,7011 - R 0,7011	Request the lead time here	PA	0.169 in 4.3 mm	0.276 in 7.0 mm	0.091 in 2.3 mm

R 1,5456 - R 1,5456	Request the lead time here	HDPE		0.504 in 12.8 mm	0.031 in 0.8 mm

R 1,6782 - R 2,0054	Request the lead time here	HDPE		0.472 in 12.0 mm	0.063 in 1.6 mm

R 2,7592 - R 3,2996	Request the lead time here	HDPE		1.26 in 32.0 mm	0.118 in 3.0 mm

R 1,3198 - R 1,5787	Request the lead time here	HDPE		0.374 in 9.5 mm	0.039 in 1.0 mm

R 1,1435 - R 1,371	Request the lead time here	HDPE		0.472 in 12.0 mm	0.039 in 1.0 mm