Hexagonal Caps are essentially used to protect all common hydraulic coupling sizes. The design is also suitable to protect round components and is fitted with a central tab for easy removal. They are suitable for Metric, BSP and UNF sizes.
Threaded Protection Caps - Metric Threads
Threaded Protection Caps are used throughout the automotive, fluid power and engineering industries. They protect threaded components from dust, moisture and damage. The range is suitable for Metric threads.
Threaded Sealing Caps - Metric Threads
Metric Threaded Sealing Caps are fitted with an internal neoprene rubber sealing disk to limit contamination from deposit and entry of particules. They are suitable to protect metric threads. While hand tightening is recommended, the cap can be applied or removed by spanner or socket at a low torque.
Tear Tab Caps
Tear Tab Caps are easy and rapid solution to remove the cap from the part. By pulling the tab, the cap split wide open offering an easy solution to numerous applications. The range is suitable to UNF and NPT threads.
Flanged Caps are designed to protect the thread of studs. They are used throughout the automotive and engineering industries for general protection. The flanges on the profiles have different sizes allowing socket wrench to function without removing the protection.
Masking Pull Plugs
Masking Pull Plugs are ideal for masking threaded and plain through-holes. The pull-tab allows an easy insertion into a hole and also become very handy to remove the part when hole is very tight. The material is flexible to allow slight variation in the sizes to mask.
Threaded Protection Plugs - Metric Threads
Threaded Protection Plugs - Metric Threads are widely used I hydraulic, pneumatic and general engineering industries. They come with a knurled head to easily grip the head and they offer an excellent protection from dirt, moisture and corrosion. They are suitable for Metric threads.
High Temperature Tapered Plugs
Masking Tapered Plugs are available as a solid plug or with a hollow core to aid in compression. The reusable plugs have excellent chemical resistance and are available in for temperature exposed applications.
Snap Fit Plugs
Snap Fit Plugs have a single turn providing tight fit once pushed into position. The plug is design with a centre tab to allow a strong grip for tightening and easy removal. The range is suitable for Metric, BSP and UNF threads.
Threaded Protection Plugs - Quick Fit
Threaded Protection Plugs - Quick Fit are widely used in hydraulic, pneumatic and general engineering industries. They come with a knurled head to easily grip the head and the short thread allows a quick fit on the part. Suitable for Metric, BSP and UNF thread sizes.