Cable Grommets

All-Fit Closed Bushings are designed to protect wire, cable, and tubing from sharp sheet metal edges. The shutter or fingers on the part provide a fit for various sizes while providing a clean finished look. Fingertip pressure is all that is required to snap-lock the bushing into its mounting hole. They are UL recognised per file E320906.

All-Fit Open Bushings are designed to protect wire, cable, and tubing from sharp sheet metal edges. The shutter or fingers on the part provide a fit for various sizes while providing a clean finished look. Fingertip pressure is all that is required to snap-lock the bushing into its mounting hole. They are UL recognised per file E320906.

Used extensively on office furniture and computer desks to eliminate the clutter of wires and cables.

Used extensively on office furniture and computer desks to eliminate the clutter of wires and cables.

Diaphragm Grommets contain a thin central film which can be pierced to allow a range of different sized wires to pass through into an enclosure or through a panel. One sided cut-outs have the central film to one side of the grommet

Diaphragm Grommets contain a thin central film which can be pierced to allow a range of different sized wires to pass through into an enclosure or through a panel. Two sided cut-outs have the central film in the centre of the grommet

Edge mount grommets easily mount to the edges of panels, routes cables, and protects wires from sharp edges. "Wings" are flexible so it can accept various diameters and shapes. Open design allows cables to be inserted and removed.

Grommet Sleeves provide extra support and protection for cables and wires that are passing through panels.

Used as wear strips, non-abrasive edging, noise-reducing conveyor strips, framing, binding, or to protect from sharp edges. Built-in lubricant for reduced friction and longer part life. Resistant to ordinary solvents, mild acids and alkalis or fungus growth.

Protects from sharp edges of panels.

Ideally suited to cover normal and irregular shaped holes in sheet metal. Complies with NASM21266. Minimum hole diameter is 1 inch.

UL94 V0 flammability rating. Dielectric strength: 1000 volts @ 50 Hz. Operating Temperature range: -40C to 140C

Dielectric strength: 1500 volts @ 50 Hz. Operating Temperature range: -40C to 85C. UL94 V0 flammability rating.

Grommet Strips keep computer, telephone and other cable tidy around the work space. They are available in a variety of colours and styles.

Flexible material because of it's design. UL94 V0 flammability rating. Dielectric strength: 1000 volts @ 50 Hz.Operating Temperature range: -40C to 140C

Edging used for protection against sharp edges of punched holes. Solid version is for straight edges. Serrated version for round, square and rectangular holes.

Edging used for protection against sharp edges of punched holes. Adhesive procieds self-retaining grip eliminating the need for epoxy. Solid version is for straight edges. Serrated version for round, square, and rectangular holes.

Protects wires, cables, tubing, and hoses. Installs instantly by simply snapping into hole. Excellent adhesion, designed to fit standard sheet metal holes.

IP67 Grommets provide a dust and watertight seal. They are suitable for external applications. Act as a blanking plug until a cable is installed.

Grommet is used by inserting the "un-flipped" grommet into the hole, forming dies on each side of the hole are pressed together until the grommet flips over itself, creating a flange on both sides of the hole. Meets NAS 1368 standard.

Suitable for applications where space is limited and flexibility and appearance are important. Quick and easy installation without tools. Dust tight & easy mounting. Suitable for unthreaded holes.

Quick Fit Grommets snap neatly and quickly into position.

Made of TPE, this flexible Grommet Strip is ideal for protecting panel edges from being damaged.

Snap-Fit Bushings protect wires, cables, and tubing from sharp edges of sheet metal holes. The push-fit design easily installs in common panel thicknesses while the durable material creates a smooth opening. Fingertip pressure to install.

Snap-Fit Bushings protect wires, cables, and tubing from sharp edges of sheet metal holes. The split, push-fit design allows this bushing to be easily assembled into holes that already contain a bundle. Fingertip pressure to install. UL Approved: E320906.