Plastic Cable Grommets

All-Fit Closed Bushings are designed to protect wire, cable, and tubing from sharp sheet metal edges. The shutter or fingers on the part provide a fit for various sizes while providing a clean finished look. Fingertip pressure is all that is required to snap-lock the bushing into its mounting hole. They are UL recognised per file E320906.

All-Fit Open Bushings are designed to protect wire, cable, and tubing from sharp sheet metal edges. The shutter or fingers on the part provide a fit for various sizes while providing a clean finished look. Fingertip pressure is all that is required to snap-lock the bushing into its mounting hole. They are UL recognised per file E320906.

Used extensively on office furniture and computer desks to eliminate the clutter of wires and cables.

Used extensively on office furniture and computer desks to eliminate the clutter of wires and cables.

Diaphragm Grommets contain a thin central film which can be pierced to allow a range of different sized wires to pass through into an enclosure or through a panel. Two sided cut-outs have the central film in the centre of the grommet

Edge mount grommets easily mount to the edges of panels, routes cables, and protects wires from sharp edges. "Wings" are flexible so it can accept various diameters and shapes. Open design allows cables to be inserted and removed.

Used as wear strips, non-abrasive edging, noise-reducing conveyor strips, framing, binding, or to protect from sharp edges. Built-in lubricant for reduced friction and longer part life. Resistant to ordinary solvents, mild acids and alkalis or fungus growth.

Protects from sharp edges of panels.

Ideally suited to cover normal and irregular shaped holes in sheet metal. Complies with NASM21266. Minimum hole diameter is 1 inch.

Edging used for protection against sharp edges of punched holes. Solid version is for straight edges. Serrated version for round, square and rectangular holes.

Edging used for protection against sharp edges of punched holes. Adhesive procieds self-retaining grip eliminating the need for epoxy. Solid version is for straight edges. Serrated version for round, square, and rectangular holes.

IP67 Grommets provide a dust and watertight seal. They are suitable for external applications. Act as a blanking plug until a cable is installed.

Grommet is used by inserting the "un-flipped" grommet into the hole, forming dies on each side of the hole are pressed together until the grommet flips over itself, creating a flange on both sides of the hole. Meets NAS 1368 standard.

Suitable for applications where space is limited and flexibility and appearance are important. Quick and easy installation without tools. Dust tight & easy mounting. Suitable for unthreaded holes.

Standard Strain Relief Bushings protect electronic products by absorbing the forces of pull, push, and twist that may be exerted on a flexible power cord. These bushings easily snap into a round or anti-rotation hole.