(34 product groups)
Can hold up to eight 3 mm fibers, by stacking on top of each other. Designed with anti-rotational pin to prevent fiber from kinking.
Designed to hold three 3 mm fibers. Adhesive pad for easy application.
Holds up to six 3mm fibers. Side brackets allow multiple clips to be connected with each other. The adhesive element of the product has a shelf life of approximately 1 Year from date of shipping; when stored in the unopened original packaging, stored at room temperature and away from sunlight.
3 slot fiber clip can hold up to 6 individual fibers of 2mm. 5 slot fiber clip can hold up to 9 fibers: 8 fibers of 2.2mm and 1 fiber of 4.0 mm.
Adhesive based clip holds up to four 3mm fibers. The adhesive element of the product has a shelf life of approximately 1 Year from date of shipping; when stored in the unopened original packaging, stored at room temperature and away from sunlight.
Holds two components parallel. Available to hold three different diameters; 4.5mm, 5.5mm, 6mm. Designed for use in the Splice Tray EFA04-25-001. Can be mounted by screw, rivet, or with adhesive pad.
Holds twelve 2.7mm splices or four 4.2mm splices. Fastens with either an adhesive pad or #4 screw.
Holds up to 24 components/splice protectors. Flexible wings grip components up to 1.6mm in diameter. Low profile to save space.
Large fiber clip can hold up to 16 single sizes of fiber: 16 each of the 3mm or 2mm sized fiber. EFA04-06, an EFA04-08 can be broken apart to form individual clips.
Large fiber clip can hold up to 16 various sizes fiber: 6 each of the 3.4mm and 2.9mm, and 4 of the 3.9mm sized fiber. EFA04-18 can be broken apart to form individual clips, or can be purchsed separately.
Fiber can stack to hold up to four 2mm cables. Small footprint, with adhesive base for ease of installation. The adhesive element of the product has a shelf life of approximately 1 Year from date of shipping; when stored in the unopened original packaging, stored at room temperature and away from sunlight.
Designed to hold four 3.9mm fibers.
Single piece provides a 90 bend control radius, and two pieces for bend control around a 180 turn. Assemble four pieces for excess fiber spooling at 30mm radius and can store approximately 60m of 900 micron fiber.
The Fibre Management range supports many low profile fibre reels for spooling excess fibre onto a PCB board. Some reels can be broken apart to form a controlled bend around a 90 or 180 degree turn. The range also offers stacking pillars and stand-offs which can be used to stack multiple reels for compact spooling of multiple runs of fibre. Fibre Guides are used to assist with reeling and corner guides maintain a bending radius through a 90 degree turn
This pillar allows for stacking multiple EFA04 fiber reels. Once the desired number of reels are stacked, they are restrained with a spring clip that is included. Pillar is mounted with an included rivet from the bottom of the board.
Used in conjunction with OFFG flexible fiber guide to raise and mount guide.
Fibre Reel Standoffs are mounted from the bottom of the board with SRHR-3555 rivets. The reel snaps onto the top of the standoff holding it in place
The Fibre Management range supports many low profile fibre reels for spooling excess fibre onto a PCB board. Some reels can be broken apart to form a controlled bend around a 90 or 180 degree turn. The Fibre Reels are board mountable using standoff EFA04 27 ASS and stackable using Stacking Pillar EFA04 53 ASS
Optical Fiber Bend Limiting Tubing offers the ultimate protection to fibers eliminating problems such as crushing, kinking and micro bending while supplying an entire self-managing solution to managing the routing of fiber.
Fiber Bend Limiting Tubing can be mounted using saddles such as the Snap-in Clips. These are simple to install and come in two different types.
Optical Fiber Bend Limiting Tubing Clips are snap-fitting for easy installation and allow the running of Optical Fiber Bend Limiting Tubing along a panel, enclosure or racking unit. They are hinge fitted which also aids the ease of installation and removal.
Optial Fiber tubing standoff clips are excellent for above board routing requiremtns. Designed with a snap in cupped base to provide easy installation and stability for the tube being supported above.
FC Connector Port Dust Caps are threaded onto FC connector adapters to provide protection from outside elements. The cost-effective HDPE material is durable and available in a variety of colors.
Optical Fiber Coiling Clips include two extruded clips which snap into each other to form a clip with a smooth, curved surface to accommodate fiber optic bundles.
Fiber rack brackets mount into a standard 19 " rack with a quarter-turn. These can be used to run optical fiber alongside a racking unit.