Hole Plugs

37 JIC Flared Fitting Threaded plugs are designed with a knurled head for easy finger installation. Used to seal light pressure requirements on 37 JIC flared fittings. Functionally equivalent to spec NAS-833, NAS-815 (MIL-C5501/1,MIL-C52078)

Our Banjo Union Plugs offered in natural LDPE are ideally suited to prevent ingress of dirt and moisture. They fit banjo unions DIN 7642 B/E. Coming with either a tab cover or without any tab.

Standard Blanking Plugs are used in sheet metal industry as a protection against sharp edges and are ideal for closing panel cavities. They provide a clean finish and a quick solution. They come in a large offering to suit hole diameter and panel thickness.

Body Plugs are used in sheet metal industry as a protection against sharp edges and are ideal for closing panel cavities. They provide a clean finish and a quick solution. They come in a large offering to suit hole diameter and panel thickness. Withstand temperature levels of -40 degree Celsius and + 135 degree Celsius.

Centre Pull Tab Plugs offer an easy and quick solution to remove the part when dimensions are tights. The tabs are long enough to be used with gloves when required.

Our Pull Tab Hose Plugs feature a large pull tab which allows easy removal. Pull Tab Hose Plugs are ideal for plugging hydraulic hoses, and they feature ribs which provide comfortable fit without stretching the hose. The yellow EVA material in Pull Tab Hose Plugs provides good tensile strength, toughness and increased flexibility

Our Collar Plugs, offered in orange LDPE, feature a self-tapping design. The thick walls of the Collar Plugs make them highly durable.

Yellow LDPE Compression Fit Plugs are specially designed to protect DKO-compression fittings (24 nipple with O-Ring) from damage and contaminants during transit, storage and processing. The flexible fin provides a firm and secure fit into the DKO swivel nut and the side pull tab allows for efficient removal.

Domed Blanking Plugs are used in sheet metal industry as a protection against sharp edges and are ideal for closing panel cavities. They provide a clean finish and a quick solution. They come in a large offering to suit hole diameter and panel thickness.

Our patented quick-fit design of Ezeplugs easily locks the plugs into place with a simple push. The LDPE plugs are designed with a strong and flexible central or lateral pull tab for efficient removal in 25 popular thread sizes.

Flanged Barrel Blanking Plugs are used in sheet metal industry as a protection against sharp edges and are ideal for closing panel cavities. They provide a clean finish and a quick solution. They come in a large offering to suit hole diameter and panel thickness.

Fluid Absorption Plug is an innovative solution to control the excess residue of fluid in a component. Safer, easier and cleaner than a conventional plug. The absorption prevent damage caused by leaks during manufacturing or transit.

Masking Flangeless Plugs are designed to mask holes without masking the surrounding area. The tapered rings and hollow core allow many diameters to be protected. Profile has a pull-tab for easy installation and removal.

Masking Pull Plugs are ideal for masking threaded and plain through-holes. The pull-tab allows an easy insertion into a hole and also become very handy to remove the part when hole is very tight. The material is flexible to allow slight variation in the sizes to mask.

High Temperature Washer Plugs are available in two different material options; either a natural silicone rubber or black EPDM. They both act as plugs for either threaded or plain holes and also mask the surface around the hole. The integral washer and plug combination performs as a single unit

NPT Thread Plugs are covered and tapered and designed for use with BSP/NPT tapered threaded fittings. They are made in blue LDPE

Our Parallel Protection Plugs are a range of popular general-purpose plugs. Offered in a wide range of sizes in natural LDPE, the Parallel Protection Plugs provide excellent protection from damage, dirt, moisture and corrosion during storage and transportation.

Push-in Cable Blanking Plugs are used in sheet metal industry as a protection against sharp edges and are ideal for closing panel cavities. They provide a clean finish and a quick solution. They come in a large offering to suit hole diameter and panel thickness.

Push-in Plugs, also referred to as bungs are a versatile option to blank a variety of holes or bores during transportation, paint process or on a finished product. These LDPE plugs protect the handler from rough surfaces from cut holes. The Bung can also be used to protect internal threads. Additionally, the plugs can be used to mask and protect holes during a low temperature paint process. Available with either a flat or domed head these plugs are also offered in a variety of colours so can be used for colour identification or to match a finished product aesthetics. The advantage of these plugs is that they are simple to apply, with a simple push in motion.

Hydraulic Quick Release Dust Plugs are male fitting suitable to plug ISO A and ISO B series. They are designed to remain attached to the hose and they offer excellent protection from dirt, moisture and corrosion.

Ribbed pipe plugs are available in two styles with flexible ribs of different diameters to fit multiple schedules of NPT and drill pipe. The straight wall on the plug’s outside diameter provides a secure friction fit with the mating pipe’s inside diameter providing excellent protection against contaminants entering the pipe.

Tube end plugs provide an effective and efficient method of sealing circular tubes. Applications include secure closures for postal tubes and composite containers and for plugging plastic tubing. Secure closures for postal tubes, composite containers and clear plastic tubing

Side Pull Plugs protect threaded or plain components and feature a side pull tab for quick removal. The tapered design allows each size to fit multiple inner diameters while resisting chemicals and contaminants.

Our Side Release Plugs provide easy removal for re-use or disposal. The LDPE Plugs protect holes and bores from ingress and dirt. Coming with either a smooth barrel or ribbed version offering different tightness of fit on application.

Snap-fit Blanking Plugs are used in sheet metal industry as a protection against sharp edges and are ideal for closing panel cavities. They provide a clean finish and a quick solution. They come in a large offering to suit hole diameter and panel thickness.