Non-Slip Strain Relief Bushings replace the UL Knot method of providing strain relief without requiring cutting or tools. This bushing creates a loop in the cable to protect against pulling or twisting.
Snap Fit Bushings protect wires, cables, and tubing from sharp edges of sheet metal holes. The split, push-fit design allows this bushing to be easily assembled into holes that already contain a bundle. Fingertip pressure to install. Withstands a push back force of greater than 35 pounds. UL Approved: E320906
Strain Relief Bushings securely anchor and insulate cables, providing protection against pulling forces and the rough edges of panels they go through.
Snap Fit Bushings protect wires, cables, and tubing from sharp edges of sheet metal holes. The push-fit design easily installs in common panel thicknesses while the durable material creates a smooth opening. Fingertip pressure to install. Withstands a push back force of greater than 35 pounds
Fibre Strain Relief Boots are effortless to install as they can be inserted without the use of any tools whilst still providing protection to wire and fibre against rough panel hole edges.
Opens to accept cables then closes firmly when installed into a hole. The durable material provides insulation and slight strain relief while protecting cables and wires from raw edges.
Open/Closed Universal bushes are designed to protect wire, cable or tubing from sharp, unfinished edges. The web or shutters help absorb shock and vibration. They have a split design allowing the bushings to be assembled into holes that may already contain a bundle. Fingertip pressure is required to snap lock the bushing into its mounting hole. UL Recognised: E320906
Standard Round Cable Strain Relief Bushings protect electronic products by absorbing the forces of pull, push, and twist that may be exerted on a flexible power cord. These bushings easily snap into a round or anti-rotation hole.