Fibre Clips are designed to hold various fibres or other components such as couplers, splice protectors or WDM's
Optical Fibre Bend Limiting Tubing offers the ultimate protection to fibres eliminating problems such as crushing, kinking and micro bending whilst supplying an entire self-managing solution to managing the routing of fibre
Fibre Cut-out Adapters convert a hole cut-out for an SC connector into a hole cut-out for an ST connector. The Optical Fibre Duplexer enables cable with aramid strands to be broken out and mechanically terminated.
The Fibre Management range supports many low profile fibre reels for spooling excess fibre onto a PCB board. Some reels can be broken apart to form a controlled bend around a 90 or 180 degree turn.
6 Slot Fibre Clips are designed to hold six 3.4mm or 2.9mm diameter fibres. They can form a part of the larger EFA04 18 fibre clip which can be broken down to form individual clips which provides plenty of versatility
The optical Fibre spool is made of two extruded clips that snap into each other to form a clip with a smooth, curved surface to accommodate fibre optic bundles.
Fibre Bend Limiting Tubing Clips are snap fitting for easy installation and allow the running of Fibre Bend Limiting Tubing along a panel, enclosure or racking unit. They are hinge fitted which also aids the ease of installation and removal
The Fibre Management range supports many low profile fibre reels for spooling excess fibre onto a PCB board. Some reels can be broken apart to form a controlled bend around a 90 or 180 degree turn. The range also offers stacking pillars and stand-offs which can be used to stack multiple reels for compact spooling of multiple runs of fibre. Fibre Guides are used to assist with reeling and corner guides maintain a bending radius through a 90 degree turn.