Menü Suche
Angebot anfordern

Bei größeren Mengen und kundenspezifischen Produkten legen Sie diese bitte in Ihren Einkaufswagen und klicken Sie dann auf Angebotsanfrage oder senden Sie einenachrichtwir antworten Ihnen innerhalb von 2 Werktagen.

Metall Industriescharniere

 (19 Produktgruppen)

Liste Rasteransicht

90 Degree Offset Corner Hinge

Auf Lager In Produktion

90 Degree Offset Corner Hinges come in different profiles to fit a combination of possibilities to offset the door to the frame.

{0} Varianten (Angewandte Filter) {0} Varianten (Keine Filter angewandt)

Weld-On Hinges - Metal

Auf Lager In Produktion

Steel, Aluminium and Stainless Steel Weld on Hinges operate by a very simple design. The Steel versions are available with either a steel or brass pin and are extremely versatile in terms of their application uses. They are available with or without a grease nipple and come in 2 different types. The Aluminium version comes with a stainless steel washers and also in 2 different types

{0} Varianten (Angewandte Filter) {0} Varianten (Keine Filter angewandt)

Weld On Hinges - Bullet

Auf Lager In Produktion

Steel, Aluminium and Stainless Steel Weld on Hinges operate by a very simple design. The Steel versions are available with either a steel or brass pin and are extremely versatile in terms of their application uses. They are available with or without a grease nipple and come in 2 different types. The Aluminium version comes with a stainless steel washers and also in 2 different types

{0} Varianten (Angewandte Filter) {0} Varianten (Keine Filter angewandt)

Metal In-Line Lift Off Hinges

Auf Lager In Produktion

Metal in-line Lift Off Hinges are side hinges easy to lift off to remove mounted doors. They have a hinge rotation angle of 180 degree and can be used as left or right hand.

{0} Varianten (Angewandte Filter) {0} Varianten (Keine Filter angewandt)

Metal Offset Lift Off Hinges

Auf Lager In Produktion

These Metal Offset Lift Off Hinges have a 180-degree rotation angle and are designed to provide clearance between the door and the frame, allowing the door to be easily lifted off the hinge pin.

Consist of two leaves and one pin, which are sold separately. One leaf is attached to the door and the other to the frame by a hinge pin that may be taken out of the hinge. They have a strong construction, which ensures their longevity in severe industrial conditions.

May be easily removed by lifting the pin out of the hinge. Ideal for metal doors in enclosures, gates, and tool cabinets. Please use the same material for each pin & leaves you use together.

  • Material: Zamak, Zinc Alloy, Die Cast Zinc Alloy, Stainless Steel, Steel, Zinc
  • Colour: Black, Chrome

{0} Varianten (Angewandte Filter) {0} Varianten (Keine Filter angewandt)

Lift Off Screw Mount Hinge

Auf Lager In Produktion

Lift Off Screw Mount Hinges are an easy lift-off function to remove flush mounted doors. The range offers a selection of material to suit application and finishing requirements . They have an hinge rotation angle of 180 degree and can be used as left or right handed. The leaf hinge design is drilled to be screwed to the frame.

{0} Varianten (Angewandte Filter) {0} Varianten (Keine Filter angewandt)

Metal Corner Hinges

Auf Lager In Produktion

Metal Corner Hinges have a hinge rotational angle of 180 degree, they are essentially used for steel panels on big sized applications. The range is made of die-cast zinc alloy with different type of finishes. The panels are hinges with a pin system.

{0} Varianten (Angewandte Filter) {0} Varianten (Keine Filter angewandt)

Spring Hinges

Auf Lager In Produktion

Spring Hinges is a completely invisible spring mechanism allowing the automatic opening and closing of a door.

{0} Varianten (Angewandte Filter) {0} Varianten (Keine Filter angewandt)

Spring Hinges - Open and Close Position

Auf Lager In Produktion

Spring hinges have a centre pin with a spring attached, ensuring that the hinge always springs back into its starting position. Ideal for use on doors and panels that require a safety mechanism of returning to its original location being opening or closing. The range offers a selection for materials and finishes, spring actions, opening and closing forces.

{0} Varianten (Angewandte Filter) {0} Varianten (Keine Filter angewandt)

Leaf Hinges - Male Stud Thread Insert Mount

Auf Lager In Produktion

The Leaf Hinges with Male Threaded Inserts are a flat leaf best suited for flush mounted doors. This range also referred as Surface Mount Hinges or Stand Off Hinges comes in various materials and stud sizes to provide a solution to most applications.

{0} Varianten (Angewandte Filter) {0} Varianten (Keine Filter angewandt)

Leaf Hinges - Half Threaded Stud & Half Counter Sunk

Auf Lager In Produktion

This range of Leaf Hinges is mounted with male stud on one leaf and countersunk screws on the oppostie leaf. The range of Surface Mount Leaf Hinges also referred as Stand Off Hinges is available in various materials to provice a solution to most applications.

{0} Varianten (Angewandte Filter) {0} Varianten (Keine Filter angewandt)

Leaf Hinges - Countersunk Mount

Auf Lager In Produktion

Counter Sunk Mount Leaf Hinges are a flat leaf widely used in various applications. They are best suited for flush mounted doors. The range also referred as Surface Mount Hinges, offers different formats of counter sunk holes depending on the strenth of the support required by the application. A choice of material is available to suit the environment demand of the application being an indoor or outoor exposure. Different rotation angles are also available. 

{0} Varianten (Angewandte Filter) {0} Varianten (Keine Filter angewandt)

External Metal Corner Hinge

Auf Lager In Produktion

External Metal Corner Hinge are suitable for machine covers and electric panels. They come in different profiles and sizes to be fixed either with stud or screwed on.

{0} Varianten (Angewandte Filter) {0} Varianten (Keine Filter angewandt)

Set Position Hinge Every 30 degree

Auf Lager In Produktion

Detent Hinges are Torque Hinges indented every 30 degrees allowing panels to be positioned and maintained withough auxiliary components. The torque is factory preset and cannot be modified by users. Made of Anodised Aluminiumm, a choice of finish is available for aesthetic appeal. Several torque values are available.

{0} Varianten (Angewandte Filter) {0} Varianten (Keine Filter angewandt)

Constant Torque Hinges - Position Controlled

Auf Lager In Produktion

These Constant Torque Hinges articulate and hold the panel in position, thus eliminating the need for a gas strut or lid stay. The torque value is fixed to a specific value, requiring no adjustment along it's lifecycle and the range includes hinges made from a variety of materials and different fixed torque values, including detent hinges.

{0} Varianten (Angewandte Filter) {0} Varianten (Keine Filter angewandt)

Side Hinges

Auf Lager In Produktion

Side Hinges offer a rotational angle of 180 degrees. Types 1 and 2 are high resistance hinges for medium and heavy door panels. They also offer high security and are assembled using the special screws provided. Type 3 is a lower cost lower security alternative

{0} Varianten (Angewandte Filter) {0} Varianten (Keine Filter angewandt)

Continuous Hinges - Metal

Auf Lager In Produktion

Our range of Continuous Hinges are available in a host of sizes to suit your project requirements. These hinges are a more visually pleasing alternative to Butt Hinges. The hinge fits along the full length of a door, lid or other hinged application, and evenly distribute a load. They provide a seamless and hard-wearing opening.

Commonly used for piano lids - these durable hinges can be used in any number of light, medium and heavy duty industries, including, patio doors, shed, commercial and engineering applications, cabinets and other enclosures, furniture making, sheet metal and other metal fabrications.

The range includes Steel and AISI 304 Stainless Steel options. These continuous hinges come in drilled or non drilled options. Also available are Aluminium 6082 T5 options that features an aluminium profile with a small stainless steel pin diameter. This hinge comes non drilled with a weld on design, and features a choice of anodised or raw finishes.

  • Can be riveted, screwed or welded in position.

{0} Varianten (Angewandte Filter) {0} Varianten (Keine Filter angewandt)

Screw On Concealed Hinges

Auf Lager In Produktion

The range of Screw on Concealed Hinges are suitable for heavy duty applications.They are mounted with screws and have a removable pin to allow the lifting of the door from the frame for easy access.Various materials and rotation angles are provided to suit many applications.

{0} Varianten (Angewandte Filter) {0} Varianten (Keine Filter angewandt)

Screw/Weld On Concealed Hinges

Auf Lager In Produktion

The range of Screw/ Weld on Concealed Hinges are suitable for heavy duty applications and offer a two part mounting solution with the frame part screwed on and the door part mounted by nut to welded stud on door. The use of a pin enables the removal of the door for easy access.They are suitable for left and right hand.

{0} Varianten (Angewandte Filter) {0} Varianten (Keine Filter angewandt)