(98 product groups)
Flanged Barrel Blanking Plugs are used in sheet metal industry as a protection against sharp edges and are ideal for closing panel cavities. They provide a clean finish and a quick solution. They come in a large offering to suit hole diameter and panel thickness.
Bolt Protection Caps protect joint fasteners against tampering and weathering. Ideal for bolts, screws, nuts and washers - they also create an enhanced finished appearance for your application.
Our range are supplied in a wide choice of sizes to suit multiple applications. These caps are available to fit DIN 933 standard bolts.
Chrome-Plated Cap Rectangular inserts and Chrome Rectangular inserts offer two different chrome finish insert options. Chrome Plated Cap inserts are ribbed for ease of insertion and positive fit and the chrome plated cap provides enhances aesthetic appearance. They are suited to a wall section of 1.0-2.0mm. The Chrome inserts provide an equally neat finish and have a high gloss chrome coating. They are available in both chrome or dark chrome coatings
These Low-Density Polyethylene Finned Stud Caps are used to protect a wide range of studs. The internal fins provide a strong hold and are flexible to suit various diameters with the use of just one part. The range comes with a grip to ease the removal of the part and are also available without the grip. Our offering includes Natural LDPE and Yellow colour options.
Angled Square Inserts offer an easily assembled, durable and long lasting part. They are perfect for tube ends or uneven surfaces and for tubes which meet surfaces at an angle
Our range of high temperature Flexible End Caps come in a variety of sizes that are suitable for Metric, BSP and UNF threads. These Flexicaps are durable making them an ideal choice for a multitude of uses; their attractive vinyl appearance makes them particularly good for finished applications.
Made from flexible PVC (90 Shore) in yellow, which can withstand operating temperatures of up to 210C. These extremely pliant caps provide excellent chemical resistance and are an economical solution for one-time uses. Typical applications include; powder coating, e-coating, plating and general paint lines. The specially formulated PVC is unaffected by weather, oxidation, oils and moisture.
Face Protector that acts as a protective guard to shield flanges from dirt, moisture, paint and sand blasting.
The tapered design creates a strong adhesion to the collar of the pipe application, and requires no fasteners for fitting. Made from durable material, they are suitable for DIN and ANSI flanges.
Driveshaft Protection Caps are used for the protection and masking of driveshaft, and the surrounding bearings, from oil and an array of chemicals.
Available in a choice of materials; Low-Density Polyethylene (LDPE) and Flexible Polyvinyl Chloride (PVC). The PVC option also provides resistance to tearing and splitting.
Our range fits DIN 748, IEC 600-72 and ISO R775.
Covered Tapered Plugs are use as a general purpose plug for a wide range of applications. Quick to fit and to remove, the convexed sides ensure a secure fit.
Expandable Masking Covers are an ideal alternative to a more conventional cap when the part to cover has an awkward shape. The Masking Covers are expandable by stretching with an elasticated end or by stretching through the elasticity of the material. The elasticated cap makes it a looser hold and therefore is best for a general protection during transport and storage or light masking requirement. The stretched material cap has a stronger hold on the part by gripping and therefore is best for application putting pressure on the part.
Cover Caps, available in a choice of materials and colour options. Designed to cover screw heads and ideal for decorative purposes, these durable covers offer excellent ingress protection for a number of applications.
Flanged Caps are designed to protect the thread of studs. They are used throughout the automotive and engineering industries for general protection uses. The flanges on the profiles have different sizes allowing a socket wrench to function without removing the protection. We offer a selection of materials, including; LDPE, TPR, PVC and Silicone. Our range also includes colour options; Natural, Red and Black and wide choice of sizes to suit your application needs.
A Protection Cap and Retaining Washer in a single unit. These Banjo Bolt Caps hold everything together during assembly, storage and shipping.
A highly versatile cap that will protect your application against damage and the ingress of dirt. The product is also supplied with bridged retaining loops. The caps are easy to grip, even when wearing gloves and are available in a choice of sizes to suit your project needs.
Easy Pull Masking Caps provide optimum protection for end tip profiles, such as rods, pipes and tubes during manufacturing processes. Typical applications include; powder coating, e-coating, plating, anodising and blasting.
The cap features an internal seal that provides a secure fit and the flanged design allows for easy removal of the can from the application. The caps can be reused multiple times.
To assure a proper fit due to design features, the inside diameter dimension should be approximately 10 percent smaller than the outside diameter of the part being masked.
Our range is available in two material options; Silicone and EPDM. Silicone is a premium masking material with high temperature and chemical resistance. They are suitable for a range of sizes due to the ribbed design. EPDM is a more economical material with reduce heat resistance.
Flexible End Caps - Oil and Grease Resistant are made of Vinyl providing good flexibility to protect threads an non threaded tips and is highly resistant to shredding. The green PVC can be used with oil and grease application. The design come with a hanging tab to work with hanging hooks.
End Tips Caps are versatile for a multitude of uses. They add protection from damage and ingress, as well as a neat finish to complete a look. Different materials and colours are available for a wide range of application uses.
A range of protective caps designed for Banjo Union connections. They provide external assembly cover during storage and transportation to protect the connection from the ingress of dirt. Our range is available in a choice of two material options; Flexible Polyvinyl Chloride (PVC) and High-Density Polyethylene.
The Flexible PVC options offer a truly snug fit that offers optimum protection. The flexible material allows for quick fitting and removal, which is aided by a convenient finger tab.
The harder material of our HDPE options make application fast, by easily clicking the cap into place for a secure fit. Suitable for temperatures ranging from a minimum of -30 up to a maximum of +80 degrees celsius.
Our Pull Tab Hose Plugs feature a large pull tab which allows easy removal. Pull Tab Hose Plugs are ideal for plugging hydraulic hoses, and they feature ribs which provide comfortable fit without stretching the hose. The yellow EVA material in Pull Tab Hose Plugs provides good tensile strength, toughness and increased flexibility
Our Banjo Union Plugs offered in natural LDPE are ideally suited to prevent ingress of dirt and moisture. They fit banjo unions DIN 7642 B/E. Coming with either a tab cover or without any tab.
Standard Blanking Plugs are used in sheet metal industry as a protection against sharp edges and are ideal for closing panel cavities. They provide a clean finish and a quick solution. They come in a large offering to suit hole diameter and panel thickness.
Yellow LDPE Compression Fit Plugs are specially designed to protect DKO-compression fittings (24 nipple with O-Ring) from damage and contaminants during transit, storage and processing. The flexible fin provides a firm and secure fit into the DKO swivel nut and the side pull tab allows for efficient removal.
Our patented quick-fit design of Ezeplugs easily locks the plugs into place with a simple push. The LDPE plugs are designed with a strong and flexible central or lateral pull tab for efficient removal in 25 popular thread sizes.
Domed Blanking Plugs are used in sheet metal industry as a protection against sharp edges and are ideal for closing panel cavities. They provide a clean finish and a quick solution. They come in a large offering to suit hole diameter and panel thickness.
Body Plugs are used in sheet metal industry as a protection against sharp edges and are ideal for closing panel cavities. They provide a clean finish and a quick solution. They come in a large offering to suit hole diameter and panel thickness. Withstand temperature levels of -40 degree Celsius and + 135 degree Celsius.
Centre Pull Tab Plugs offer an easy and quick solution to remove the part when dimensions are tights. The tabs are long enough to be used with gloves when required.