Screw Mount Cable Clamps

Bundles are securely sored in these nylon clamps. Many bundle diameters. Black and Natural colors. UL94 V-2 and UL94 V-0 rated material. Different mounting holes for different screw sizes

Screw Mount cable straps are a very versatile cable management system which not only bound cable tightly but also can be mounted either by self-adhesive or by a screw or rivet.

This cable clamp securely holds corrugated and convoluted tubing or other bundles in place. It has an internal rib spanning the diameter of the clamp providing a tight grip.

These cable clamps have a hinged locking top. The cable(s) are placed in the center of the clamp first, then the hinged top is placed over the cables. The legs of the clamps are placed into two holes. The top is secured in place, holding the cable with the help of two screws. As the screws are engaged, the legs expand holding the clamp in place without the need of a nut. This means there is no need to access the bottom side of the board.

Strain Relief Clamps mount in a chassis to secure the main power cable in appliances. The clamp provides strain relief to the cable and protects the cable from the metal cut-out whilst the screw mounting provides a secure fastening

Low profile for use on densely packed boards or other limited space applications. Useful for routing two parallel wire bundles.125 in Hole in center for a #4 or M3 screw. Available in three different sizes to hold bundles of 1/8 in, 3/16 in and 1/4 in. UL94 V-2 Nylon 6/6, Natural color

Vinyl coating provides a more permanent solution for protecting cables against vibration and damage. The screw mount area is bare to ensure firm tightening. Available in 14 sizes to accommodate various bundle diameters.

Flexible Steel Clamps with Vinyl Coating provide a secure cable mounting solution for quick wire management. These clamps can be used in electronic equipment assembly.

Steel Clamp Screw mounts are ideal for clamping applications for pipes, hoses, cables and wires. Available with or without cushioning. The rubber cushion provides some protection for the hose whilst the steel component and screw mount application result in a secure fastening.

Low profile for use on densely packed boards or other limited space applications. Good for mounting bundles in corners or along edges. Mount with a #4 or M3 screw and provide exceptional retention strength. Available in three sizes for bundle diameters 1/8 in, 3/16 in or 1/4 in

For flat or ribbon cables Flat Cable Clamps are ideal and the adhesive mount aluminium clamps offer a secure fastening with a simple installation thanks to the adhesive base and there is also screw mount options available. The split arm feature ensures even easer cable and mounting access

This range of corrugated tube clips is designed to work with size 20 and 25 of Essentra Slit Harness Wrap (SHR Series), comes in four different mounting types; snap lock into either a round or square hole (to prevent rotation), screw mount and adhesive mount. Internal rib that grips the wrap. Releasable latch that allows for maintenance.

Standing capacitor holders are designed to screw mount to the chassis. Strong, one-piece constructed products. Available with or without mounting hardware. Available with a standoff feature internally to space the capacitor from the chassis. Also available without the standoff feature for pass-through applications.